Welcome! Log In Create A New Profile

Advanced

Pogo V4 Flashed with wrong uboot

Posted by fluxor 
Pogo V4 Flashed with wrong uboot
August 20, 2019 12:44AM
Is there any easy way to undo this ? I had an NSA320 that I flashed and my brain was stuck on NSA320, so they are flashed with that uboot now. Thanks for any assistance, or laughs you can send my way.

It was late when I wrote this, now it's later, I mean to say that I bricked 2 Pogo V4's using the NSA320 uboot.



Edited 1 time(s). Last edit at 08/20/2019 02:12AM by fluxor.
Re: Pogo V4 Flashed with wrong uboot
August 20, 2019 03:17AM
fluxor,

> Is there any easy way to undo this ? I had an
> NSA320 that I flashed and my brain was stuck on
> NSA320, so they are flashed with that uboot now.
> Thanks for any assistance, or laughs you can send
> my way.

No worries!

>
> It was late when I wrote this, now it's later, I
> mean to say that I bricked 2 Pogo V4's using the
> NSA320 uboot.

You need to connect serial console and run kwboot to unbrick it. See this post:
https://forum.doozan.com/read.php?3,51739,51919#msg-51919

You need to use the Pogo V4 u-boot from the released thread:
uboot.2017.07-tld-1.pogo_v4.mtd0.kwb

In case you need serial console info:
https://forum.doozan.com/read.php?8,13263

If you're not sure about the Pogo V4 serial port pins layout, post the question here.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Pogo V4 Flashed with wrong uboot
August 20, 2019 09:56PM
Re: Pogo V4 Flashed with wrong uboot
August 21, 2019 02:49AM
You guys are the best man. That's great, I was totally un-aware that this was possible. I can't thank you enough for the information.
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: