6pack
Some Uboot and migrating questions. August 19, 2012 01:28AM |
Re: Some Uboot and migrating questions. August 19, 2012 03:35PM |
Admin Registered: 13 years ago Posts: 18,594 |
U-Boot 2010.09 (Oct 23 2010 - 11:53:10) Marvell-GoflexNet by Jeff Doozan, Peter Carmichael Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found ** Block device usb 0 not supported ** Invalid boot device ** Creating 1 MTD partitions on "nand0": 0x000002500000-0x000010000000 : "mtd=3" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI error: validate_ec_hdr: bad VID header offset 2048, expected 512 UBI error: validate_ec_hdr: bad EC header UBI error: ubi_io_read_ec_hdr: validation failed for PEB 0 UBI error: ubi_init: cannot attach mtd1 UBI error: ubi_init: UBI error: cannot initialize UBI, error -22 UBI init error -22 ** Block device usb 0 not supported ** Block device usb 1 not supported ** Block device usb 2 not supported ** Block device usb 3 not supported ** Block device usb 0 not supported ** Block device usb 0 not supported Wrong Image Format for bootm command ERROR: can't get kernel image! stopping USB.. Reset IDE: Bus 0: ....OK Bus 1: OK Device 0: Model: Hitachi HDT721016SLA380 Firm: ST1OA31B Ser#: xxxxxxxxxxxxx Type: Hard Disk Supports 48-bit addressing Capacity: 152627.8 MB = 149.0 GB (312581808 x 512) Device 1: Model: Hitachi HDT721016SLA380 Firm: ST1OA31B Ser#: xxxxxxxxxxxxx Type: Hard Disk Supports 48-bit addressing Capacity: 152627.8 MB = 149.0 GB (312581808 x 512) Loading file "/boot/uImage" from ide device 0:1 (hda1) 1638256 bytes read Loading file "/boot/uInitrd" from ide device 0:1 (hda1) 6664745 bytes read ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-3.2.26-kirkwood Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1638192 Bytes = 1.6 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-3.2.26-kirkwood Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 6664681 Bytes = 6.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ...
Re: Some Uboot and migrating questions. August 20, 2012 12:07AM |
Registered: 11 years ago Posts: 4 |
6pack
Re: Some Uboot and migrating questions. August 20, 2012 06:28AM |
cd /tmp wget http://jeff.doozan.com/debian/uboot/install_uboot_mtd0.sh chmod +x install_uboot_mtd0.sh ./install_uboot_mtd0.shThis i believe will write the nand with uboot. Since I had already installed debian on a usb stick, and had done this before, i didnt do this step.
sync #what does this do? does it sync archlinux files or boot imageI ran sync but nothing happened.
Re: Some Uboot and migrating questions. August 20, 2012 08:58AM |
Registered: 11 years ago Posts: 232 |
6pack
Re: Some Uboot and migrating questions. August 21, 2012 02:06AM |
supply your own kernel = ?Quote
Simply download the tarball that best fits and supply your own kernel.
6pack
Re: Some Uboot and migrating questions. August 21, 2012 02:33AM |
Re: Some Uboot and migrating questions. August 21, 2012 03:01AM |
Admin Registered: 13 years ago Posts: 18,594 |