bricked goflex home after U-boot install and now orange led blinks

1) I have just installed U-boot on my goflex home with 2Tb by:

install_uboot_mtd0.sh --no-uboot-check

and it said flashed successfully.

but power failed after that and the unit now started with fast green led blinks and now orange led blinks..

I can no longer ssh back in...

2) I have tried to download the USB rescue from:

https://www.dropbox.com/sh/nwt2kbvetvgvroo/ySbSkso_Xo/Kirkwood/rescue/USB-Rescue-tarballs

and created the USB drive and looks like rescue boots up!

I can now ssh into rescue!!


But what do I need to do now in order to resume the normal install process????
Do I only need to find a working usb images and boot up with that? Where can I find such image?

Much appreciated for your insight and help.



Edited 2 time(s). Last edit at 08/20/2012 11:01PM by protocold.

Assuming all went well, you may have access to it via netconsole.

Example of configuration for netconsole

Many thanks WarHeads. I have updated my problem in the first post above... any further insight?



Edited 3 time(s). Last edit at 08/20/2012 11:02PM by protocold.