Please help with unbrick iomega ix2-200.
When trying to install Debian, it cleared the NAND.
I installed JTAG and connected to ix-200 using OpenOCD (using configuration files from iomega iconnect)
It turned out according to the instructions for installing openWRT on iconnect loaded in RAM uboot from iomega iconnect (uboot.kwb to the address 0x0600000, start from 0x0600000, then on the serial port I see a response from the NAS, there I tried to load an different backup\image to the address 0x0, but the NAS still does not load after resetting.
how do I restore the NAS? Thanks