Welcome! Log In Create A New Profile

Advanced

ZyXel NSA325 V1 - Erased NAND what now

Posted by vex88 
ZyXel NSA325 V1 - Erased NAND what now
June 20, 2020 02:46PM
Hey all,

I was playing with fire and made a fundamental mistake with the command erase nand in uBoot. I am trying to write/flash the uBoot now, but I think I managed to brick it completely. When connected to Serial, I don't have any input options. Can someone confirm if it is possible to restore or if it is impossible at that point.

Thanks for any reply :)
Attachments:
open | download - Serial Connection.png (7.8 KB)
Re: ZyXel NSA325 V1 - Erased NAND what now
June 20, 2020 03:56PM
You can now do some research on kwboot / jtag...
Re: ZyXel NSA325 V1 - Erased NAND what now
June 20, 2020 04:25PM
vex88,

As David said above, you need to run kwboot to recover. No need for JTAG yet.

You need another Linux box to run kwboot from. See here for example:

https://forum.doozan.com/read.php?3,51739,51919#msg-51919

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: