Hi Bodhi
my device GoflexNet
i tested this new uboot with your updated boot parameters it works fine and very robust.
Thank you very much.
I had to modify the boot parameters coz I also have a rescue system installed on internal flash.
Here I am listing the extra boot parameter setting which I did, so others my also profit from them.
#force rescue command used to force the boot into rescue system.
fw_setenv force_rescue 0
fw_setenv force_rescue_bootcmd 'if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi'
#rescue boot command
fw_setenv rescue_installed 1
fw_setenv rescue_bootcmd 'if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi'
fw_setenv rescue_set_bootargs 'setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params'
#update global boot command to accommodate the rescue boot cmd
fw_setenv bootcmd 'run force_rescue_bootcmd; run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; run rescue_bootcmd; reset'
thans & cheers
lal
---------
Mod: Made this into its own thread in Rescue System forum. Added code tag.
Edited 2 time(s). Last edit at 06/30/2016 01:22AM by bodhi.