Dockstar does not boot July 05, 2011 03:51AM |
Registered: 13 years ago Posts: 16 |
nc -l -u -p 6666
1. U-Boot 2010.09 (Oct 23 2010 - 11:49:22) 2. Marvell-Dockstar/Pogoplug by Jeff Doozan 3. Hit any key to stop autoboot: 4i hit return key
1. Marvell>> ls 2. ls 3. drwxr-xr-x 0 Thu Dec 18 20:30:04 2008 bin 4. drwxr-xr-x 0 Thu Jan 15 19:07:02 2009 dev 5. drwxr-xr-x 0 Tue Aug 11 05:52:40 2009 etc 6. drwxr-xr-x 0 Thu Dec 18 20:30:04 2008 lib 7. lrwxrwxrwx 11 Wed Aug 26 22:27:00 2009 linuxrc -> bin/busybox 8. drwxr-xr-x 0 Thu Dec 18 21:45:09 2008 mnt 9. drwxr-xr-x 0 Tue Feb 26 17:26:05 2008 proc 10. drwxr-xr-x 0 Tue Mar 10 23:53:33 2009 root 11. drwxr-xr-x 0 Thu Dec 18 20:30:04 2008 sbin 12. drwxr-xr-x 0 Sat Jan 01 00:13:48 2000 sys 13. drwxr-xr-x 0 Sat Jan 01 00:13:40 2000 tmp 14. drwxr-xr-x 0 Thu Jan 15 18:31:53 2009 usr 15. lrwxrwxrwx 8 Wed Aug 26 22:27:00 2009 var -> /tmp/var 16. -rw-r--r-- 67 Sat Jan 01 04:40:49 2000 uboot-original-mtd0.kwb.md5 17. -rw-r--r-- 524288 Sat Jan 01 04:40:51 2000 uboot-original-mtd0.kwb
1. ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000 2. Scanning JFFS2 FS: ........ done. 3. ### JFFS2 load complete: 524288 bytes loaded to 0x800000 4. ## Starting application at 0x00800200 ... 5. 6. U-Boot 2010.09 (Oct 23 2010 - 11:49:22) 7. Marvell-Dockstar/Pogoplug by Jeff Doozan 8. Hit any key to stop autoboot: 0 9. (Re)start USB... 10. USB: Register 10011 NbrPorts 1 11. USB EHCI 1.00 12. scanning bus for devices... 3 USB Device(s) found 13. scanning bus for storage devices... 0 Storage Device(s) found 14. ** Block device usb 0 not supported 15. 16. ** Invalid boot device ** 17. Creating 1 MTD partitions on "nand0": 18. 0x000002500000-0x000010000000 : "mtd=3" 19. UBI: attaching mtd1 to ubi0 20. UBI: physical eraseblock size: 131072 bytes (128 KiB) 21. UBI: logical eraseblock size: 129024 bytes 22. UBI: smallest flash I/O unit: 2048 23. UBI: sub-page size: 512 24. UBI: VID header offset: 512 (aligned 512) 25. UBI: data offset: 2048 26. UBI: attached mtd1 to ubi0 27. UBI: MTD device name: "mtd=3" 28. UBI: MTD device size: 219 MiB 29. UBI: number of good PEBs: 1751 30. UBI: number of bad PEBs: 1 31. UBI: max. allowed volumes: 128 32. UBI: wear-leveling threshold: 4096 33. UBI: number of internal volumes: 1 34. UBI: number of user volumes: 0 35. UBI: available PEBs: 1730 36. UBI: total number of reserved PEBs: 21 37. UBI: number of PEBs reserved for bad PEB handling: 17 38. UBI: max/mean erase counter: 1/1 39. UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19 40. Error reading superblock on volume 'ubi:rootfs'! 41. ** Block device usb 0 not supported 42. ** Block device usb 1 not supported 43. ** Block device usb 2 not supported 44. ** Block device usb 3 not supported 45. ** Block device usb 0 not supported 46. ** Block device usb 0 not supported 47. Wrong Image Format for bootm command 48. ERROR: can't get kernel image! 49. stopping USB.. 50. ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000 51. Scanning JFFS2 FS: ........ done. 52. ### JFFS2 load complete: 524288 bytes loaded to 0x800000 53. ## Starting application at 0x00800200 ... 54. 55. U-Boot 2010.09 (Oct 23 2010 - 11:49:22) 56. Marvell-Dockstar/Pogoplug by Jeff Doozan 57. Hit any key to stop autoboot: 4
pazos
Re: Dockstar does not boot July 09, 2011 08:05AM |
Re: Dockstar does not boot July 09, 2011 08:53AM |
Registered: 13 years ago Posts: 16 |
Re: Dockstar does not boot July 09, 2011 05:07PM |
Registered: 13 years ago Posts: 16 |
cd /tmp wget http://jeff.doozan.com/debian/rescue/install_rescue.sh chmod +x install_rescue.sh ./install_rescue.shis that all i have to do ?
pazos
Re: Dockstar does not boot July 09, 2011 05:25PM |
Re: Dockstar does not boot July 09, 2011 06:16PM |
Registered: 13 years ago Posts: 16 |
pazos
Re: Dockstar does not boot July 10, 2011 11:33AM |
Re: Dockstar does not boot July 10, 2011 02:44PM |
Registered: 13 years ago Posts: 16 |
rescue:~# fw_printenv ethact=egiga0 bootdelay=3 baudrate=115200 mainlineLinux=yes console=ttyS0,115200 led_init=green blinking led_exit=green off led_error=orange blinking mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) mtdids=nand0=orion_nand partition=nand0,2 stdin=serial stdout=serial stderr=serial rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi force_rescue=0 force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi ubifs_mtd=3 ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done usb_scan_list=1 2 3 4 usb_scan_1=usb=0:1 dev=sda1 usb_scan_2=usb=1:1 dev=sdb1 usb_scan_3=usb=2:1 dev=sdc1 usb_scan_4=usb=3:1 dev=sdd1 usb_init=run usb_scan usb_device=0:1 usb_root=/dev/sda1 usb_rootfstype=ext2 usb_rootdelay=10 usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset ethaddr=00:10:75:1A:D6:D3 arcNumber=2097 serverip=192.168.0.18 ipaddr=192.168.0.20 if_netconsole=ping $serverip start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; preboot=run if_netconsole start_netconsole rescue_installed=1tks
pazos
Re: Dockstar does not boot July 10, 2011 05:15PM |
Re: Dockstar does not boot July 11, 2011 07:40AM |
Registered: 13 years ago Posts: 16 |
Re: Dockstar does not boot July 12, 2011 03:52PM |
Registered: 13 years ago Posts: 16 |
# nc -l -u -p 6666 U-Boot 2010.09 (Oct 23 2010 - 11:49:22) Marvell-Dockstar/Pogoplug by Jeff Doozan Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... Device NOT ready Request Sense returned 00 00 00 1 Storage Device(s) found ** Bad partition 1 ** Device NOT ready Request Sense returned 00 00 00 ** Can't read from device 0 ** ** Unable to use usb 0:1 for fatload ** Creating 1 MTD partitions on "nand0": 0x000002500000-0x000010000000 : "mtd=3" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=3" UBI: MTD device size: 219 MiB UBI: number of good PEBs: 1751 UBI: number of bad PEBs: 1 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 0 UBI: available PEBs: 1730 UBI: total number of reserved PEBs: 21 UBI: number of PEBs reserved for bad PEB handling: 17 UBI: max/mean erase counter: 1/1 UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19 Error reading superblock on volume 'ubi:rootfs'! ** Bad partition 1 ** ** Block device usb 1 not supported ** Block device usb 2 not supported ** Block device usb 3 not supported ** Bad partition 1 ** ** Bad partition 1 ** Wrong Image Format for bootm command ERROR: can't get kernel image! stopping USB.. NAND read: device 0 offset 0x100000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-2.6.32.18-dockstar Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3236180 Bytes = 3.1 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ...fsck has been done.
Re: Dockstar does not boot July 15, 2011 04:32PM |
Registered: 13 years ago Posts: 16 |
Re: Dockstar does not boot July 17, 2011 07:55AM |
Registered: 13 years ago Posts: 161 |
Re: Dockstar does not boot July 17, 2011 12:46PM |
Registered: 13 years ago Posts: 16 |