Headless Debian Wheezy armhf with nand install
Posted by guillaume
|
Re: Headless Debian Wheezy armhf with nand install December 07, 2012 12:46AM |
Registered: 12 years ago Posts: 2 |
Last 2 weeks running the mele with the Headless Debian Wheezy armhf on nand. And saw some issues on the memory usages. After added 512 mb swap partition it seems to run more stable no error in messages and syslog regarding lack resources and suddenly quiting processes. Without the swap partition had some troubles with updatign freshclam update and cpan update. (running ispconfig ningx+posftix+dovecot)
Edited 1 time(s). Last edit at 12/07/2012 02:37AM by wimmie.
Edited 1 time(s). Last edit at 12/07/2012 02:37AM by wimmie.
|
Re: Headless Debian Wheezy armhf with nand install December 17, 2012 05:47PM |
Registered: 12 years ago Posts: 2 |
Hi guillaume !
I've just got my Mele A2000G and trying to move my ZoneMInder to it. I'm using your Minimal armhf Wheezy image and booted in just seconds. Great work !!!
Ive seen you are running a Mele's farm. Were you able to boot from the SATA disks ? Or, at a minimum, boot from MMC/NAND and mount the SATA as the rootfs ??
Your help will be greatly appreciated !!
Alberto
I've just got my Mele A2000G and trying to move my ZoneMInder to it. I'm using your Minimal armhf Wheezy image and booted in just seconds. Great work !!!
Ive seen you are running a Mele's farm. Were you able to boot from the SATA disks ? Or, at a minimum, boot from MMC/NAND and mount the SATA as the rootfs ??
Your help will be greatly appreciated !!
Alberto
|
Re: Headless Debian Wheezy armhf with nand install February 12, 2013 08:31AM |
Registered: 12 years ago Posts: 4 |
After months of hard work I managed to install and configure everything I needed on it, and I have to say these images made it a very stable home server :)
Thanks to PIMP_MY_MELE everything is booting and working straight from the NAND partition, so I would like to backup the whole installation into a SD card to make sure I can get it back to work is case I will mess it up.
Is it possibile?
Thanks to PIMP_MY_MELE everything is booting and working straight from the NAND partition, so I would like to backup the whole installation into a SD card to make sure I can get it back to work is case I will mess it up.
Is it possibile?
|
Re: Headless Debian Wheezy armhf with nand install February 14, 2013 07:28PM |
Registered: 12 years ago Posts: 24 |
I guess:
dd if=/dev/nand of=/dev/SDXorMMCBLK0P1
------------------------------------------------------------
My A10 tablet (Point Of View [NL] ProTab2XXL 10" ICS)
dd if=/dev/nand of=/dev/SDXorMMCBLK0P1
------------------------------------------------------------
My A10 tablet (Point Of View [NL] ProTab2XXL 10" ICS)
