Pogoplug E02 Original Firmware wanted

Hi all

Looking to restore my E02 back to factory settings. When I installed Arch, I noobily wiped the original mtdblock partitions and now don't have the original stock firmware on the device at all. When I try to boot into the pogoplug w/ no devices attached, it simply fails to do anything.

I'd like to restore it back to factory settings w/ the original firmware, in order to reinstall everything from scratch the right way (so when I boot w/o devices, it boots to pogoplug firmware)

Anyone have an image I can use or instructions on how I can build my own image?

Thanks

n64 Wrote:
-------------------------------------------------------
> Hi all
>
> Looking to restore my E02 back to factory
> settings. When I installed Arch, I noobily wiped
> the original mtdblock partitions and now don't
> have the original stock firmware on the device at
> all. When I try to boot into the pogoplug w/ no
> devices attached, it simply fails to do anything.
>
> I'd like to restore it back to factory settings w/
> the original firmware, in order to reinstall
> everything from scratch the right way (so when I
> boot w/o devices, it boots to pogoplug firmware)
>
> Anyone have an image I can use or instructions on
> how I can build my own image?
>
> Thanks

I think this should be posted as a new thread in u-boot forum section to get more attention. I'm not sure if I've kept the original mtds somewhere. I'll take a look for it.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

I have it. I will post a link tomorrow.

Gravelrash Wrote:
-------------------------------------------------------
> I have it. I will post a link tomorrow.

Cool.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Thank you!

I did receive a PM from a kind forum member which contained images that has the already modified version of the software (with uBoot installed). I will try these, but if you have the original, unmodified versions gravelrash then I'd appreciate those also

Cheers

darnit - i only got the original mtd0

this any use to you? the link is here

https://www.dropbox.com/s/xz27bxfvalctx3h/mtd0-orig?dl=0

Sorry it's a bit late, but I have these on my cloud: http://ppl.ug/KH4OtdkSclI/

I believe it's as close to out the factory as possible - it boots a ramdisk image which then copies the necessary files over to nand.