Welcome! Log In Create A New Profile

Advanced

Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread

Posted by JeffS 
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 19, 2017 05:39PM
It didn't probably connect but here's the exact results just so you know:

root@DebianPlug:~# df -h
Filesystem      Size  Used Avail Use% Mounted on
udev             10M     0   10M   0% /dev
tmpfs            12M  400K   12M   4% /run
/dev/sda1       7.1G  2.6G  4.2G  39% /
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs            24M     0   24M   0% /run/shm
tmpfs            60M   16K   60M   1% /tmp
/dev/sdb1        29G   45M   27G   1% /media/JoeyUSB3
root@DebianPlug:~# cd /media/JoeyUSB3
root@DebianPlug:/media/JoeyUSB3# time cp -a /boot/vmlinu* .
cp: cannot create regular file './vmlinuz-3.18.5-oxnas-tld-1': No space left on device
cp: cannot create regular file './vmlinuz-4.4.48-oxnas-tld-1': No space left on device

real    0m0.170s
user    0m0.000s
sys     0m0.130s
root@DebianPlug:/media/JoeyUSB3# ls -lh vmlinu*
ls: cannot access vmlinu*: No such file or directory
root@DebianPlug:/media/JoeyUSB3# wget https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.4.54.tar.xz
converted 'https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.4.54.tar.xz'; (ANSI_X3.4-1968) -> 'https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.4.54.tar.xz'; (UTF-8)
--2017-03-19 19:37:02--  https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.4.54.tar.xz
Resolving www.kernel.org (www.kernel.org)... 147.75.196.57, 2604:1380:1:3600::3
Connecting to www.kernel.org (www.kernel.org)|147.75.196.57|:443... connected.
ERROR: The certificate of 'www.kernel.org' is not trusted.
ERROR: The certificate of 'www.kernel.org' hasn't got a known issuer.
root@DebianPlug:/media/JoeyUSB3# ls -lh linux-4.4.54.tar.xz
ls: cannot access linux-4.4.54.tar.xz: No such file or directory
root@DebianPlug:/media/JoeyUSB3# time tar xf linux-4.4.54.tar.xz
tar: linux-4.4.54.tar.xz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now

real    0m0.049s
user    0m0.000s
sys     0m0.020s
root@DebianPlug:/media/JoeyUSB3#

Right now I'm putting a movie and ISO on another USB stick that will be copied to the newly-formatted Ext4 one using the ThinClient booting CinnoMint. One sec :-)

-update- No, taking the Ext4 USB stick back to the ThinClient running CinnoMint, after formatting it there an hour earlier wasn't enough permissions to copy an iso and movie over to the stick.

=========
-=Cloud 9=-



Edited 2 time(s). Last edit at 03/19/2017 08:18PM by JoeyPogoPlugE02.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 19, 2017 07:01PM
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 19, 2017 08:42PM
JoeyPogoPlugE02 Wrote:
-------------------------------------------------------
> It didn't probably connect but here's the exact re
> sults just so you know:
>
>
> root@DebianPlug:~# df -h
> Filesystem      Size  Used Avail Use% Mounted on
> udev             10M     0   10M   0% /dev
> tmpfs            12M  400K   12M   4% /run
> /dev/sda1       7.1G  2.6G  4.2G  39% /
> tmpfs           5.0M     0  5.0M   0% /run/lock
> tmpfs            24M     0   24M   0% /run/shm
> tmpfs            60M   16K   60M   1% /tmp
> /dev/sdb1        29G   45M   27G   1% /media/JoeyU
> SB3
> root@DebianPlug:~# cd /media/JoeyUSB3
> root@DebianPlug:/media/JoeyUSB3# time cp -a /boot/
> vmlinu* .
> cp: cannot create regular file './vmlinuz-3.18.5-o
> xnas-tld-1': No space left on device
> cp: cannot create regular file './vmlinuz-4.4.48-o
> xnas-tld-1': No space left on device
> 
> real    0m0.170s
> user    0m0.000s
> sys     0m0.130s
> root@DebianPlug:/media/JoeyUSB3# ls -lh vmlinu*
> ls: cannot access vmlinu*: No such file or directo
> ry
> root@DebianPlug:/media/JoeyUSB3# wget https://www.
> kernel.org/pub/linux/kernel/v4.x/linux-4.4.54.tar.
> xz
> converted 'https://www.kernel.org/pub/linux/kernel
> /v4.x/linux-4.4.54.tar.xz' (ANSI_X3.4-1968) -> 'ht
> tps://www.kernel.org/pub/linux/kernel/v4.x/linux-4
> .4.54.tar.xz' (UTF-8)
> --2017-03-19 19:37:02--  https://www.kernel.org/pu
> b/linux/kernel/v4.x/linux-4.4.54.tar.xz
> Resolving www.kernel.org (www.kernel.org)... 147.7
> 5.196.57, 2604:1380:1:3600::3
> Connecting to www.kernel.org (www.kernel.org)|147.
> 75.196.57|:443... connected.
> ERROR: The certificate of 'www.kernel.org' is not
> trusted.
> ERROR: The certificate of 'www.kernel.org' hasn't
> got a known issuer.
> root@DebianPlug:/media/JoeyUSB3# ls -lh linux-4.4.
> 54.tar.xz
> ls: cannot access linux-4.4.54.tar.xz: No such fil
> e or directory
> root@DebianPlug:/media/JoeyUSB3# time tar xf linux
> -4.4.54.tar.xz
> tar: linux-4.4.54.tar.xz: Cannot open: No such fil
> e or directory
> tar: Error is not recoverable: exiting now
> 
> real    0m0.049s
> user    0m0.000s
> sys     0m0.020s
> root@DebianPlug:/media/JoeyUSB3#
> 
>
>
> Right now I'm putting a movie and ISO on another U
> SB stick that will be copied to the newly-formatte
> d Ext4 one using the ThinClient booting CinnoMint.
> One sec :-)
>
> -update- No, taking the Ext4 USB stick back
> to the ThinClient running CinnoMint, after formatt
> ing it there an hour earlier wasn't enough permiss
> ions to copy an iso and movie over to the stick.

Ok, so it has nothing to do with the Pogo then :)

Try to get it work on Mint. If you can copy something to it while in Mint, then take the stick back to the Pogo!

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 19, 2017 09:56PM
bodhi Wrote:
-------------------------------------------------------

> Try to get it work on Mint. If you can copy someth
> ing to it while in Mint, then take the stick back
> to the Pogo!

Mint (at least the Live USB CinnoMint) wouldn't get past root permissions, even right after formatting and trying to copy over. Then I tried to make it a share and have permissions overwritten and that didn't work either. I'd think SanDisk Ultra was read-only if it weren't for Mint formatting it. Even Pogo couldn't write anything that I've seen so far.
My main Windows machine - which will be a few more days in maintenance mode - has a particular Linux driver that can copy to Ext2 and maybe Ext3 drives but not Ext4. So lacking other options I can try that soon.

I was going to ask if it's all the same if I were to format Ext2, which I haven't tried, but I suppose Ext2 uses more RAM because it's not Journaled?
Another thing, my neighbor says I can have their laptop's old hard drive, which might have enough life in it to plug into a USB 3 adapter and try that soon as well.

Do you think there maybe built-in protections in Pogoplug's SOC hardware to prevent that mpcie from writing? Or something isn't letting what's plugged-in write.

Also I have another Pogo Pro for last resort testing, and it isn't last resort yet LOL No really I have no room for more mess. I do this in a different room and have to plug in the SanDisk every boot up :-)

=========
-=Cloud 9=-
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 19, 2017 10:20PM
Joey,

> Mint (at least the Live USB CinnoMint) wouldn't ge
> t past root permissions

You don't need root for this USB drive. It is for testing pupose, so data is good enough.

Use the Mint menu (just like in Windows Start menu). Go to the Acessories submenu and format it as Ext2 or Ext4, does not matter. After you've formatted it, use the mouse/touchpad right button to eject (or safely remove) it. That way you can be sure that it was synched.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 19, 2017 11:01PM
bodhi Wrote:
-------------------------------------------------------
> You don't need root for this USB drive. It is for
> testing pupose, so data is good enough.
>
> Use the Mint menu (just like in Windows Start menu
> ). Go to the Acessories submenu and format it as E
> xt2 or Ext4, does not matter. After you've formatt
> ed it, use the mouse/touchpad right button to ejec
> t (or safely remove) it. That way you can be sure
> that it was synched.

I'll list it :-)
1. I insert SanDisk USB 3 stick
2. Tell G-Parted to format to Ext3 and give it label
3. Unmount the stick so GParted can do it's job.
4. GParted finishes and I mount the drive again, newly formatted
5. I have another USB stick with an ISO and movie, to copy to the SanDisk USB stick, to try reading over LAN once this is re-mounted in Pogoplug.
6. Error says no, you need owner's permission to write to this stick (Sandisk)!
7. I check permissions and it's root and read only basically.

My longshot guess is that Live Mint doesn't allow the kind of permissions it might if this were installed on a hard drive.

* what does sync do then?

** bedtime ;-/

=========
-=Cloud 9=-
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 19, 2017 11:52PM
Joey,

Are you running Cinamon desktop on Mint? if not can you switch to that?

And I'm not talking about Live. I meant do you have Mint with Cinamon Desktop on any of your laptop(s) or Thin Client(s)?

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner



Edited 1 time(s). Last edit at 03/19/2017 11:54PM by bodhi.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 20, 2017 10:02AM
bodhi Wrote:
-------------------------------------------------------
> Joey,
>
> Are you running Cinamon desktop on Mint? if not ca
> n you switch to that?
>
> And I'm not talking about Live. I meant do you hav
> e Mint with Cinamon Desktop on any of your laptop(
> s) or Thin Client(s)?

Right now I have no Mints installed on hard drives, I was using live USB sticks. For the next few days I'll be wrapping up maintenance on a few computers and should have a spare hard drive after that.

=========
-=Cloud 9=-



Edited 1 time(s). Last edit at 03/20/2017 01:27PM by JoeyPogoPlugE02.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 20, 2017 12:48PM
Joey,

> Right now I have no Mints installed on hard drives
> , I was using live USB sticks. For the next few da
> ys I'll be wrapping up maintenance on a few comput
> ers and should have a spare hard drive after that.

It's a good idea! Live USB is good enough, but you're not runing the same system I'm running (Mint 18.x Cinamon) so it is a little hard for you to recognize right away what I posted (I assumed you did).

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 20, 2017 06:20PM
bodhi Wrote:
-------------------------------------------------------
> It's a good idea! Live USB is good enough, but you
> 're not runing the same system I'm running (Mint 1
> 8.x Cinamon) so it is a little hard for you to rec
> ognize right away what I posted (I assumed you did

Yeah, anything Mint on live USB here is 18.1, favorite being XFCE (not nearby ATM though) as long as video hardware acceleration is available.
Soooo... Neighbor donated hard drive I'd replaced, it's on its last leg maybe, a Toshiba 2.5" with a USB 3.0 adapter cap on it. I formatted that Ext3, installed Ext2IFS_1_12 which allows me to copy files from Windows to Ext2 and 3. I'll have this hopefully mounted in the setup within an hour. See if it reads over LAN. Doubt it, but you never know...

=========
-=Cloud 9=-



Edited 1 time(s). Last edit at 03/20/2017 06:21PM by JoeyPogoPlugE02.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 20, 2017 06:45PM
fdisk -l
dmesg
lsusb
lsusb -vvv

Not sure what to make if it...

root@DebianPlug:~# fdisk -l

Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa

Device           Boot      Start        End    Sectors   Size Id Type
/dev/mtdblock0p1 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p2 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p3 ?    2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ?    2863311530 5721052499 2857740970   1.3T aa unknown

Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01ecce21

Device     Boot Start      End  Sectors  Size Id Type
/dev/sda1        2048 15147007 15144960  7.2G 83 Linux

Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
root@DebianPlug:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.48-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Pogoplug V3 Pro
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c08a6980, node_mem_map c7ef9000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[    0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[    0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 117048K/131072K available (6406K kernel code, 288K rwdata, 1908K rodata, 228K init, 247K bss, 14024K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0826ddc   (8316 kB)
      .init : 0xc0827000 - 0xc0860000   ( 228 kB)
      .data : 0xc0860000 - 0xc08a8338   ( 289 kB)
       .bss : 0xc08a8338 - 0xc08e6310   ( 248 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:160
[    0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[    0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[    0.000161] Console: colour dummy device 80x30
[    0.000192] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[    0.050017] pid_max: default: 32768 minimum: 301
[    0.050183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051013] Initializing cgroup subsys net_cls
[    0.051092] CPU: Testing write buffer coherency: ok
[    0.051517] Setting up static identity map for 0x60008220 - 0x60008258
[    0.190131] Brought up 2 CPUs
[    0.190154] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[    0.190932] devtmpfs: initialized
[    0.195678] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.195942] prandom: seed boundary self test passed
[    0.200358] prandom: 100 self tests passed
[    0.200386] pinctrl core: initialized pinctrl subsystem
[    0.201274] NET: Registered protocol family 16
[    0.201812] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.230018] cpuidle: using governor ladder
[    0.260016] cpuidle: using governor menu
[    0.265067] gpio-oxnas 44000000.gpio: at address c8848000
[    0.265456] gpio-oxnas 44100000.gpio: at address c884a000
[    0.266017] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[    0.388495] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[    0.388613] oxnas-pcie 47c00000.pcie-controller: link up
[    0.388928] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[    0.388953] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[    0.388971] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[    0.388986] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[    0.389004] pci_bus 0000:00: root bus resource [bus 00-7f]
[    0.389068] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[    0.389158] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[    0.389340] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.389703] PCI: bus0: Fast back to back transfers disabled
[    0.389798] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[    0.390338] vgaarb: loaded
[    0.390835] SCSI subsystem initialized
[    0.391188] libata version 3.00 loaded.
[    0.391715] usbcore: registered new interface driver usbfs
[    0.391823] usbcore: registered new interface driver hub
[    0.391984] usbcore: registered new device driver usb
[    0.392194] pps_core: LinuxPPS API ver. 1 registered
[    0.392209] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.392256] PTP clock support registered
[    0.394393] clocksource: Switched to clocksource rps_clocksource_timer
[    0.413153] NET: Registered protocol family 2
[    0.414028] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.414072] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.414105] TCP: Hash tables configured (established 1024 bind 1024)
[    0.414202] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.414243] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.414504] NET: Registered protocol family 1
[    0.415045] RPC: Registered named UNIX socket transport module.
[    0.415065] RPC: Registered udp transport module.
[    0.415075] RPC: Registered tcp transport module.
[    0.415086] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.415150] pci 0000:00:00.0: enabling device (0140 -> 0142)
[    0.415219] PCI: CLS 32 bytes, default 32
[    0.415546] Unpacking initramfs...
[    0.805212] Freeing initrd memory: 3644K (c7a99000 - c7e28000)
[    0.806615] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.806778] Initialise system trusted keyring
[    0.832522] zbud: loaded
[    0.851422] NFS: Registering the id_resolver key type
[    0.851494] Key type id_resolver registered
[    0.851507] Key type id_legacy registered
[    0.851550] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.851573] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.852500] fuse init (API version 7.23)
[    0.854551] Key type big_key registered
[    0.933209] Key type asymmetric registered
[    0.933245] Asymmetric key parser 'x509' registered
[    0.933373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.933399] io scheduler noop registered
[    0.933416] io scheduler deadline registered
[    0.933475] io scheduler cfq registered (default)
[    0.934110] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.935682] console [ttyS0] disabled
[    0.935779] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[    1.521021] console [ttyS0] enabled
[    1.535749] loop: module loaded
[    1.787722] scsi host0: sata_oxnas
[    1.840980] ata1: SATA max UDMA/133 irq 7
[    1.845068] sata_oxnas: resetting SATA core
[    1.846103] nand: Could not find valid ONFI parameter page; aborting
[    1.846146] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[    1.846151] nand: Hynix NAND 128MiB 3,3V 8-bit
[    1.846159] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.846177] Scanning device for bad blocks
[    1.929505] 2 ofpart partitions found on MTD device 41000000.nand
[    1.935587] Creating 2 MTD partitions on "41000000.nand":
[    1.940999] 0x000000000000-0x000000e00000 : "boot"
[    1.947655] 0x000000e00000-0x000008000000 : "data"
[    1.954967] oxnas-gmac 40400000.ethernet: no reset control found
[    1.960988] stmmac - user ID: 0x12, Synopsys ID: 0x35
[    1.966013]  Ring mode enabled
[    1.969047]  DMA HW capability register supported
[    1.973568]  Enhanced/Alternate descriptors
[    1.977899]  Enabled extended descriptors
[    1.981898]  RX Checksum Offload Engine supported (type 2)
[    1.987353]  TX Checksum insertion supported
[    1.991626]  Wake-Up On Lan supported
[    1.995269]  Enable RX Mitigation via HW Watchdog Timer
[    2.016762] libphy: stmmac: probed
[    2.020211] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[    2.026624] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[    2.033285] PPP generic driver version 2.4.2
[    2.038123] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.044689] ehci-pci: EHCI PCI platform driver
[    2.049502] oxnas-ehci 40200100.ehci: EHCI Host Controller
[    2.055065] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[    2.062906] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[    2.080148] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[    2.086474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.093268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.100477] usb usb1: Product: EHCI Host Controller
[    2.105328] usb usb1: Manufacturer: Linux 4.4.48-oxnas-tld-1 ehci_hcd
[    2.111754] usb usb1: SerialNumber: 40200100.ehci
[    2.117391] hub 1-0:1.0: USB hub found
[    2.121251] hub 1-0:1.0: 2 ports detected
[    2.126254] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    2.131558] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[    2.144458] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    2.153341] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.160151] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.167339] usb usb2: Product: xHCI Host Controller
[    2.172213] usb usb2: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[    2.178621] usb usb2: SerialNumber: 0000:00:00.0
[    2.184220] hub 2-0:1.0: USB hub found
[    2.188032] hub 2-0:1.0: 2 ports detected
[    2.192931] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    2.198154] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[    2.205736] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.214123] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    2.221107] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.228300] usb usb3: Product: xHCI Host Controller
[    2.230010] ata1: SATA link down (SStatus 0 SControl 300)
[    2.238558] usb usb3: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[    2.244989] usb usb3: SerialNumber: 0000:00:00.0
[    2.250649] hub 3-0:1.0: USB hub found
[    2.254461] hub 3-0:1.0: 2 ports detected
[    2.259591] usbcore: registered new interface driver cdc_acm
[    2.265264] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.273382] usbcore: registered new interface driver cdc_wdm
[    2.279229] usbcore: registered new interface driver usb-storage
[    2.285424] usbcore: registered new interface driver usbserial
[    2.291624] usbcore: registered new interface driver usbserial_generic
[    2.298188] usbserial: USB Serial support registered for generic
[    2.304629] mousedev: PS/2 mouse device common for all mice
[    2.310430] i2c /dev entries driver
[    2.315171] hidraw: raw HID events driver (C) Jiri Kosina
[    2.321072] usbcore: registered new interface driver usbhid
[    2.326622] usbhid: USB HID core driver
[    2.332564] NET: Registered protocol family 10
[    2.338529] sit: IPv6 over IPv4 tunneling driver
[    2.344156] NET: Registered protocol family 17
[    2.348746] Key type dns_resolver registered
[    2.354534] registered taskstats version 1
[    2.358650] Loading compiled-in X.509 certificates
[    2.363586] zswap: loaded using pool lzo/zbud
[    2.383851] Key type encrypted registered
[    2.391272] Freeing unused kernel memory: 228K (c0827000 - c0860000)
[    2.440276] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[    2.531253] udevd[99]: starting version 175
[    2.592404] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.599091] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.636835] usb 1-1: Product: USB2.0 Hub
[    2.651834] hub 1-1:1.0: USB hub found
[    2.671029] hub 1-1:1.0: 4 ports detected
[    2.970327] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci
[    3.091310] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5575
[    3.098165] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.105533] usb 1-1.1: Product: Cruzer Glide
[    3.109788] usb 1-1.1: Manufacturer: SanDisk
[    3.114058] usb 1-1.1: SerialNumber: 4C530201370809103182
[    3.120829] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    3.127608] scsi host1: usb-storage 1-1.1:1.0
[    3.155630] usbcore: registered new interface driver uas
[    4.131430] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.27 PQ: 0 ANSI: 6
[    4.146012] sd 1:0:0:0: [sda] 15330304 512-byte logical blocks: (7.85 GB/7.31 GiB)
[    4.156185] sd 1:0:0:0: [sda] Write Protect is off
[    4.161254] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[    4.162426] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.184279]  sda: sda1
[    4.198551] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   13.476666] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   13.506227] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   14.998901] udevd[298]: starting version 175
[   17.193909] EXT4-fs (sda1): re-mounted. Opts: (null)
[   17.305932] random: nonblocking pool is initialized
[   17.477793] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   20.642938] Adding 1048572k swap on /swapfile1.  Priority:-1 extents:360 across:1169636k FS
[   22.831485] zram: Added device: zram0
[   22.851507] zram: Added device: zram1
[   22.871518] zram: Added device: zram2
[   22.891402] zram: Added device: zram3
[   22.910873] zram0: detected capacity change from 0 to 23220224
[   22.962598] Adding 22672k swap on /dev/zram0.  Priority:10 extents:1 across:22672k SSFS
[   22.975470] zram1: detected capacity change from 0 to 23220224
[   23.022085] Adding 22672k swap on /dev/zram1.  Priority:10 extents:1 across:22672k SSFS
[   23.032514] zram2: detected capacity change from 0 to 23220224
[   23.097671] Adding 22672k swap on /dev/zram2.  Priority:10 extents:1 across:22672k SSFS
[   23.112284] zram3: detected capacity change from 0 to 23220224
[   23.164687] Adding 22672k swap on /dev/zram3.  Priority:10 extents:1 across:22672k SSFS
[   28.710179] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   31.710128] oxnas-gmac 40400000.ethernet eth0: Link is Down
[   32.710169] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   35.710149] oxnas-gmac 40400000.ethernet eth0: Link is Down
[   36.710177] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   60.148200] zram: Cannot change disksize for initialized device
[   60.202370] zram: Cannot change disksize for initialized device
[   60.274823] zram: Cannot change disksize for initialized device
[   60.347307] zram: Cannot change disksize for initialized device
[  138.560696] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[  138.585492] usb 3-2: New USB device found, idVendor=1f75, idProduct=0621
[  138.592348] usb 3-2: New USB device strings: Mfr=4, Product=5, SerialNumber=6
[  138.599552] usb 3-2: Product: FX-D0002.HDD
[  138.603729] usb 3-2: Manufacturer: ULT-Best
[  138.608151] usb 3-2: SerialNumber: 20150718
[  138.833131] usb-storage 3-2:1.0: USB Mass Storage device detected
[  138.840576] scsi host2: usb-storage 3-2:1.0
[  148.265999] scsi 2:0:0:0: Direct-Access     ULT-Best FX-D0002.HDD          PQ: 0 ANSI: 6
[  148.286041] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  166.160335] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  171.380300] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  171.590067] usb 3-2: device not accepting address 2, error -62
[  176.810234] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  182.032611] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  182.250086] usb 3-2: device not accepting address 2, error -62
[  187.470310] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  192.700405] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  192.910192] usb 3-2: device not accepting address 2, error -62
[  198.130352] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  203.350359] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  203.560192] usb 3-2: device not accepting address 2, error -62
[  203.620436] usb 3-2: USB disconnect, device number 2
[  208.840276] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  214.060446] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  214.270097] usb 3-2: device not accepting address 3, error -62
[  219.490496] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  224.710402] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  224.920181] usb 3-2: device not accepting address 4, error -62
[  230.140218] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  235.360273] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  235.570060] usb 3-2: device not accepting address 5, error -62
[  240.790284] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  246.010324] xhci_hcd 0000:00:00.0: Timeout while waiting for setup device command
[  246.220134] usb 3-2: device not accepting address 6, error -62
[  246.250160] usb usb3-port2: unable to enumerate USB device
root@DebianPlug:~# lsusb
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@DebianPlug:~# lsusb -vvv

Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         3
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            4.04
  iManufacturer           3 Linux 4.4.48-oxnas-tld-1 xhci-hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:00:00.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0
Hub Descriptor:
  bLength              12
  bDescriptorType      42
  nNbrPorts             2
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  bHubDecLat          0.0 micro seconds
  wHubDelay             0 nano seconds
  DeviceRemovable    0x00
 Hub Port Status:
   Port 1: 0000.02a0 5Gbps power Rx.Detect
   Port 2: 0000.0263 5Gbps power suspend enable connect
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           15
  bNumDeviceCaps          1
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x02
      Latency Tolerance Messages (LTM) Supported
    wSpeedsSupported   0x0008
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   3
      Lowest fully-functional device speed is SuperSpeed (5Gbps)
    bU1DevExitLat           0 micro seconds
    bU2DevExitLat           0 micro seconds
Device Status:     0x0001
  Self Powered

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.04
  iManufacturer           3 Linux 4.4.48-oxnas-tld-1 xhci-hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:00:00.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0001
  Self Powered

Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0781 SanDisk Corp.
  idProduct          0x5575
  bcdDevice            1.27
  iManufacturer           1 SanDisk
  iProduct                2 Cruzer Glide
  iSerial                 3 4C530201370809103182
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              200mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x05e3 Genesys Logic, Inc.
  idProduct          0x0608 USB-2.0 4-Port HUB
  bcdDevice           77.64
  iManufacturer           0
  iProduct                1 USB2.0 Hub
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x00e0
    Ganged power switching
    Ganged overcurrent protection
    TT think time 32 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.04
  iManufacturer           3 Linux 4.4.48-oxnas-tld-1 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 40200100.ehci
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
Device Status:     0x0001
  Self Powered
root@DebianPlug:~#

I dunno bodhi, it might be time to put the Pogo 3 back together and find some other way to serve external hard drives over Gigabit LAN. And donate my Pogo3s to some prisoner who could use a project for the next 20-to-life 8-)

=========
-=Cloud 9=-



Edited 2 time(s). Last edit at 03/20/2017 08:04PM by JoeyPogoPlugE02.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 20, 2017 11:05PM
Hey bodhi, there's something I previously missed: the item we bought, here, do you see a link that says Document? This downloads a 57.4 MB rar file with drivers inside for this and other devices. The NEC folder looks familiar and has .ini files that may offer clues to the problems being had. Not sure if it'll help but I'll keep it both for Windows possibilities later on and the (admittedly doubtful) possibility it can help with Linux somehow.

(Wow,) is this the actual Linux driver? http://lxr.linux.no/linux+v2.6.31.14/drivers/usb/host/xhci-hcd.c

=========
-=Cloud 9=-



Edited 1 time(s). Last edit at 03/20/2017 11:22PM by JoeyPogoPlugE02.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 20, 2017 11:47PM
Well, this is worse than before :)

root@DebianPlug:~# fdisk -l

Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa

Device           Boot      Start        End    Sectors   Size Id Type
/dev/mtdblock0p1 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p2 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p3 ?    2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ?    2863311530 5721052499 2857740970   1.3T aa unknown

Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01ecce21

Device     Boot Start      End  Sectors  Size Id Type
/dev/sda1        2048 15147007 15144960  7.2G 83 Linux

Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

There is no sdb in this output. So does not matter what happen after this.

If you need to use the Pogo V3 then, yes, put it back together.

If I can find the time to try this again (need to dig out 2nd my USB molex cable or my USB 3.0 power hub) then I'll let you know. I'm not ready to declare that it's junk or anything like that yet :)

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner



Edited 2 time(s). Last edit at 03/20/2017 11:50PM by bodhi.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 21, 2017 07:49AM
bodhi Wrote:
-------------------------------------------------------
...
> hub) then I'll let you know. I'm not ready to decl
> are that it's junk or anything like that yet :)

As the Pogoplug isn't being used for anything (future torrents if anything), I might have gotten my second wind.

Just thinking out loud, not so much a ToDo list:

1. The half-height ribbon you ordered (I think you did) might hold a clue if the screws ground certain places together. Maybe it's a crackpot theory but it sure seems worth investigating.
2. I haven't tried (or don't remember trying) a USB 2 stick in that unit. Possible the 3.0 part is whacked and 2.0 is somehow fine.
3. I might have a USB 2 cap for that hard drive. Can't remember, have to look.

I'll take care of some stressers today and come back to this with some kind of Zen mind tonight :-)

=========
-=Cloud 9=-



Edited 1 time(s). Last edit at 03/21/2017 11:28AM by JoeyPogoPlugE02.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 21, 2017 01:50PM
New one using Seagate ADAPTER that goes between 2.5" hard drive and USB 3.0 plug:
Note: I hit fdisk -l again after seeing a mention of spinning up.

root@DebianPlug:~# fdisk -l

Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa

Device           Boot      Start        End    Sectors   Size Id Type
/dev/mtdblock0p1 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p2 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p3 ?    2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ?    2863311530 5721052499 2857740970   1.3T aa unknown

Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01ecce21

Device     Boot Start      End  Sectors  Size Id Type
/dev/sda1        2048 15147007 15144960  7.2G 83 Linux

Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
root@DebianPlug:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.48-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Pogoplug V3 Pro
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c08a6980, node_mem_map c7ef9000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[    0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[    0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 117048K/131072K available (6406K kernel code, 288K rwdata, 1908K rodata, 228K init, 247K bss, 14024K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0826ddc   (8316 kB)
      .init : 0xc0827000 - 0xc0860000   ( 228 kB)
      .data : 0xc0860000 - 0xc08a8338   ( 289 kB)
       .bss : 0xc08a8338 - 0xc08e6310   ( 248 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:160
[    0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[    0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[    0.000161] Console: colour dummy device 80x30
[    0.000192] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[    0.050022] pid_max: default: 32768 minimum: 301
[    0.050183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051005] Initializing cgroup subsys net_cls
[    0.051087] CPU: Testing write buffer coherency: ok
[    0.051512] Setting up static identity map for 0x60008220 - 0x60008258
[    0.190131] Brought up 2 CPUs
[    0.190154] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[    0.190935] devtmpfs: initialized
[    0.195735] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.195996] prandom: seed boundary self test passed
[    0.200412] prandom: 100 self tests passed
[    0.200437] pinctrl core: initialized pinctrl subsystem
[    0.201269] NET: Registered protocol family 16
[    0.201807] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.230021] cpuidle: using governor ladder
[    0.260014] cpuidle: using governor menu
[    0.265075] gpio-oxnas 44000000.gpio: at address c8848000
[    0.265459] gpio-oxnas 44100000.gpio: at address c884a000
[    0.266022] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[    0.389025] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[    0.389145] oxnas-pcie 47c00000.pcie-controller: link up
[    0.389463] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[    0.389486] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[    0.389504] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[    0.389519] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[    0.389537] pci_bus 0000:00: root bus resource [bus 00-7f]
[    0.389601] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[    0.389688] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[    0.389870] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.390295] PCI: bus0: Fast back to back transfers disabled
[    0.390389] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[    0.390868] vgaarb: loaded
[    0.391357] SCSI subsystem initialized
[    0.391720] libata version 3.00 loaded.
[    0.392238] usbcore: registered new interface driver usbfs
[    0.392348] usbcore: registered new interface driver hub
[    0.392509] usbcore: registered new device driver usb
[    0.392721] pps_core: LinuxPPS API ver. 1 registered
[    0.392737] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.392785] PTP clock support registered
[    0.394905] clocksource: Switched to clocksource rps_clocksource_timer
[    0.413672] NET: Registered protocol family 2
[    0.414548] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.414592] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.414625] TCP: Hash tables configured (established 1024 bind 1024)
[    0.414725] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.414768] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.415032] NET: Registered protocol family 1
[    0.415582] RPC: Registered named UNIX socket transport module.
[    0.415603] RPC: Registered udp transport module.
[    0.415613] RPC: Registered tcp transport module.
[    0.415626] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.415687] pci 0000:00:00.0: enabling device (0140 -> 0142)
[    0.415761] PCI: CLS 32 bytes, default 32
[    0.416102] Unpacking initramfs...
[    0.805532] Freeing initrd memory: 3644K (c7a99000 - c7e28000)
[    0.806968] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.807134] Initialise system trusted keyring
[    0.819980] zbud: loaded
[    0.841364] NFS: Registering the id_resolver key type
[    0.841433] Key type id_resolver registered
[    0.841448] Key type id_legacy registered
[    0.841492] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.841515] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.842419] fuse init (API version 7.23)
[    0.844426] Key type big_key registered
[    0.921912] Key type asymmetric registered
[    0.921940] Asymmetric key parser 'x509' registered
[    0.922068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.922096] io scheduler noop registered
[    0.922114] io scheduler deadline registered
[    0.922178] io scheduler cfq registered (default)
[    0.922823] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.924395] console [ttyS0] disabled
[    0.924490] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[    1.509985] console [ttyS0] enabled
[    1.632509] loop: module loaded
[    1.884462] scsi host0: sata_oxnas
[    1.937687] ata1: SATA max UDMA/133 irq 7
[    1.941788] sata_oxnas: resetting SATA core
[    1.942812] nand: Could not find valid ONFI parameter page; aborting
[    1.942853] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[    1.942858] nand: Hynix NAND 128MiB 3,3V 8-bit
[    1.942868] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.942886] Scanning device for bad blocks
[    2.025507] 2 ofpart partitions found on MTD device 41000000.nand
[    2.031598] Creating 2 MTD partitions on "41000000.nand":
[    2.036994] 0x000000000000-0x000000e00000 : "boot"
[    2.043694] 0x000000e00000-0x000008000000 : "data"
[    2.050931] oxnas-gmac 40400000.ethernet: no reset control found
[    2.056921] stmmac - user ID: 0x12, Synopsys ID: 0x35
[    2.061975]  Ring mode enabled
[    2.065013]  DMA HW capability register supported
[    2.069514]  Enhanced/Alternate descriptors
[    2.073861]  Enabled extended descriptors
[    2.077849]  RX Checksum Offload Engine supported (type 2)
[    2.083315]  TX Checksum insertion supported
[    2.087559]  Wake-Up On Lan supported
[    2.091212]  Enable RX Mitigation via HW Watchdog Timer
[    2.112212] libphy: stmmac: probed
[    2.115609] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[    2.122073] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[    2.128734] PPP generic driver version 2.4.2
[    2.133616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.140180] ehci-pci: EHCI PCI platform driver
[    2.144988] oxnas-ehci 40200100.ehci: EHCI Host Controller
[    2.150568] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[    2.158359] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[    2.180147] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[    2.186460] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.193256] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.200463] usb usb1: Product: EHCI Host Controller
[    2.205319] usb usb1: Manufacturer: Linux 4.4.48-oxnas-tld-1 ehci_hcd
[    2.211742] usb usb1: SerialNumber: 40200100.ehci
[    2.217359] hub 1-0:1.0: USB hub found
[    2.221224] hub 1-0:1.0: 2 ports detected
[    2.226240] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    2.231534] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[    2.244426] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    2.253291] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.260052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.267281] usb usb2: Product: xHCI Host Controller
[    2.272163] usb usb2: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[    2.278574] usb usb2: SerialNumber: 0000:00:00.0
[    2.284172] hub 2-0:1.0: USB hub found
[    2.287989] hub 2-0:1.0: 2 ports detected
[    2.292920] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    2.298142] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[    2.305722] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.314088] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    2.321075] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.328268] usb usb3: Product: xHCI Host Controller
[    2.330009] ata1: SATA link down (SStatus 0 SControl 300)
[    2.338529] usb usb3: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[    2.344960] usb usb3: SerialNumber: 0000:00:00.0
[    2.350609] hub 3-0:1.0: USB hub found
[    2.354419] hub 3-0:1.0: 2 ports detected
[    2.359541] usbcore: registered new interface driver cdc_acm
[    2.365217] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.373332] usbcore: registered new interface driver cdc_wdm
[    2.379179] usbcore: registered new interface driver usb-storage
[    2.385374] usbcore: registered new interface driver usbserial
[    2.391580] usbcore: registered new interface driver usbserial_generic
[    2.398141] usbserial: USB Serial support registered for generic
[    2.404572] mousedev: PS/2 mouse device common for all mice
[    2.410370] i2c /dev entries driver
[    2.415162] hidraw: raw HID events driver (C) Jiri Kosina
[    2.421035] usbcore: registered new interface driver usbhid
[    2.426585] usbhid: USB HID core driver
[    2.432465] NET: Registered protocol family 10
[    2.438423] sit: IPv6 over IPv4 tunneling driver
[    2.444042] NET: Registered protocol family 17
[    2.448650] Key type dns_resolver registered
[    2.454438] registered taskstats version 1
[    2.458554] Loading compiled-in X.509 certificates
[    2.463488] zswap: loaded using pool lzo/zbud
[    2.483911] Key type encrypted registered
[    2.503004] Freeing unused kernel memory: 228K (c0827000 - c0860000)
[    2.540208] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[    2.645972] udevd[99]: starting version 175
[    2.702973] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.709657] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.736857] usb 1-1: Product: USB2.0 Hub
[    2.752665] hub 1-1:1.0: USB hub found
[    2.772305] hub 1-1:1.0: 4 ports detected
[    3.070853] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci
[    3.191262] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5575
[    3.198118] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.205445] usb 1-1.1: Product: Cruzer Glide
[    3.209697] usb 1-1.1: Manufacturer: SanDisk
[    3.213980] usb 1-1.1: SerialNumber: 4C530201370809103182
[    3.221271] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    3.228014] scsi host1: usb-storage 1-1.1:1.0
[    3.256099] usbcore: registered new interface driver uas
[    4.231367] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.27 PQ: 0 ANSI: 6
[    4.245685] sd 1:0:0:0: [sda] 15330304 512-byte logical blocks: (7.85 GB/7.31 GiB)
[    4.255431] sd 1:0:0:0: [sda] Write Protect is off
[    4.260395] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[    4.261591] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.282370]  sda: sda1
[    4.293619] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   16.811156] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   16.837245] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   18.316272] udevd[301]: starting version 175
[   18.833190] random: nonblocking pool is initialized
[   20.205941] EXT4-fs (sda1): re-mounted. Opts: (null)
[   20.498483] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   23.641456] Adding 1048572k swap on /swapfile1.  Priority:-1 extents:360 across:1169636k FS
[   26.462492] zram: Added device: zram0
[   26.482304] zram: Added device: zram1
[   26.502236] zram: Added device: zram2
[   26.522250] zram: Added device: zram3
[   26.556817] zram0: detected capacity change from 0 to 23220224
[   26.652879] Adding 22672k swap on /dev/zram0.  Priority:10 extents:1 across:22672k SSFS
[   26.671644] zram1: detected capacity change from 0 to 23220224
[   26.742402] Adding 22672k swap on /dev/zram1.  Priority:10 extents:1 across:22672k SSFS
[   26.752542] zram2: detected capacity change from 0 to 23220224
[   26.811645] Adding 22672k swap on /dev/zram2.  Priority:10 extents:1 across:22672k SSFS
[   26.826278] zram3: detected capacity change from 0 to 23220224
[   26.891955] Adding 22672k swap on /dev/zram3.  Priority:10 extents:1 across:22672k SSFS
[   32.190164] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   55.713454] zram: Cannot change disksize for initialized device
[   55.787197] zram: Cannot change disksize for initialized device
[   55.889592] zram: Cannot change disksize for initialized device
[   56.030026] zram: Cannot change disksize for initialized device
[  166.086699] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[  166.126732] usb 3-2: New USB device found, idVendor=0bc2, idProduct=ab00
[  166.135700] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  166.152250] usb 3-2: Product: Slim
[  166.160220] usb 3-2: Manufacturer: Seagate
[  166.164354] usb 3-2: SerialNumber: 52AB4031F0QZ
[  166.450332] scsi host2: uas
[  166.470819] scsi 2:0:0:0: Direct-Access     Seagate  Slim             6408 PQ: 0 ANSI: 6
[  166.481436] sd 2:0:0:0: [sdb] Spinning up disk...
root@DebianPlug:~# fdisk -l

Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa

Device           Boot      Start        End    Sectors   Size Id Type
/dev/mtdblock0p1 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p2 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p3 ?    2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ?    2863311530 5721052499 2857740970   1.3T aa unknown

Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01ecce21

Device     Boot Start      End  Sectors  Size Id Type
/dev/sda1        2048 15147007 15144960  7.2G 83 Linux

Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
root@DebianPlug:~# lsusb
Bus 003 Device 002: ID 0bc2:ab00 Seagate RSS LLC
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@DebianPlug:~# lsusb -vvv

Bus 003 Device 002: ID 0bc2:ab00 Seagate RSS LLC
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         9
  idVendor           0x0bc2 Seagate RSS LLC
  idProduct          0xab00
  bcdDevice            1.00
  iManufacturer           2 Seagate
  iProduct                3 Slim
  iSerial                 1 52AB4031F0QZ
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          121
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower               36mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           4
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     98
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
        MaxStreams             32
        Data-in pipe (0x03)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
        MaxStreams             32
        Data-out pipe (0x04)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
        MaxStreams             32
        Status pipe (0x02)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
        Command pipe (0x01)
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           22
  bNumDeviceCaps          2
  USB 2.0 Extension Device Capability:
    bLength                 7
    bDescriptorType        16
    bDevCapabilityType      2
    bmAttributes   0x00000002
      Link Power Management (LPM) Supported
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat        2047 micro seconds
Device Status:     0x0000
  (Bus Powered)

Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         3
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            4.04
  iManufacturer           3 Linux 4.4.48-oxnas-tld-1 xhci-hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:00:00.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0
Hub Descriptor:
  bLength              12
  bDescriptorType      42
  nNbrPorts             2
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  bHubDecLat          0.0 micro seconds
  wHubDelay             0 nano seconds
  DeviceRemovable    0x00
 Hub Port Status:
   Port 1: 0000.02a0 5Gbps power Rx.Detect
   Port 2: 0000.0203 5Gbps power U0 enable connect
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           15
  bNumDeviceCaps          1
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x02
      Latency Tolerance Messages (LTM) Supported
    wSpeedsSupported   0x0008
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   3
      Lowest fully-functional device speed is SuperSpeed (5Gbps)
    bU1DevExitLat           0 micro seconds
    bU2DevExitLat           0 micro seconds
Device Status:     0x0001
  Self Powered

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.04
  iManufacturer           3 Linux 4.4.48-oxnas-tld-1 xhci-hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:00:00.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0001
  Self Powered

Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0781 SanDisk Corp.
  idProduct          0x5575
  bcdDevice            1.27
  iManufacturer           1 SanDisk
  iProduct                2 Cruzer Glide
  iSerial                 3 4C530201370809103182
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              200mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x05e3 Genesys Logic, Inc.
  idProduct          0x0608 USB-2.0 4-Port HUB
  bcdDevice           77.64
  iManufacturer           0
  iProduct                1 USB2.0 Hub
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x00e0
    Ganged power switching
    Ganged overcurrent protection
    TT think time 32 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.04
  iManufacturer           3 Linux 4.4.48-oxnas-tld-1 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 40200100.ehci
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
Device Status:     0x0001
  Self Powered
root@DebianPlug:~#

I'll come back later.

=========
-=Cloud 9=-



Edited 2 time(s). Last edit at 03/21/2017 02:24PM by JoeyPogoPlugE02.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 21, 2017 09:44PM
Hey Bodhi and Joey,

Does this device use the Renesas uPD720202 chipset? It says "based on". Isn't the driver available in kernel for this for x86? Is there an ARM specific version or do you have to recompile it from source? Have you guys ID'd the new hardware in dmesg yet?

Joey, without reading all the details so far on everything, have you ran or tried running # lsblk and # lspci?
I'm sure Bodhi is getting all the info he needs so far, but I'm just kind of curious.

I see a Seagate drive is showing up in lsusb, but not showing in fdisk. Is this a good, Linux file system formatted hdd and is it USB 2 or 3?



I needed to install:
# apt-get install pciutils
To run:
# lspci


Here's the results on a v3 currently running off USB.
[root@PogoV3Debian jeff]# lsblk -afm
NAME      FSTYPE LABEL  MOUNTPOINT NAME        SIZE OWNER GROUP  MODE
sda                                sda        14.4G root  floppy brw-rw---T
`-sda1    ext3   rootfs /          `-sda1     14.4G root  floppy brw-rw---T
loop0                              loop0            root  disk   brw-rw---T
loop1                              loop1            root  disk   brw-rw---T
loop2                              loop2            root  disk   brw-rw---T
loop3                              loop3            root  disk   brw-rw---T
loop4                              loop4            root  disk   brw-rw---T
loop5                              loop5            root  disk   brw-rw---T
loop6                              loop6            root  disk   brw-rw---T
loop7                              loop7            root  disk   brw-rw---T
mtdblock0                          mtdblock0    14M root  disk   brw-rw---T
mtdblock1                          mtdblock1   114M root  disk   brw-rw---T

[root@PogoV3Debian jeff]# lspci
00:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe

--------------------------------------------------------------
Blog: www.jeffstory.org
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 21, 2017 11:25PM
JeffS Wrote:
-------------------------------------------------------
Jeff thanks for stopping by. Ever since Adorama's Pogoplug blowout/rebate sale two years ago, I've wondered if the mpcie slot could be useful on the Pro model, since the stock wireless didn't work once Debian was installed. So my intention is the experiment to see how fast this gets USB 3 stuff over Gigabit LAN, and if it works, to have a speedy distribution point for when family drops by and they want the family media collection. Sickeningly mundane, but then again "what if" it's faster than I imagine? We'd all be $12-25 away from a frightfully useful home server for files mainly. * Honestly I don't know my ass from a hole in the ground, but am the amateur visionary once a year LOL

So to answer where I can, here goes:

> Does this device use the Renesas uPD720202 chipset
I see it listed, so I'm going with yes.

> ? It says "based on". Isn't the driver available i
> n kernel for this for x86? Is there an ARM specifi
> c version or do you have to recompile it from sour
> ce?

BODHI!

> Have you guys ID'd the new hardware in dmesg yet?

I ran it and added it at the bottom/


> Joey, without reading all the details so far on everything, have you ran or tried running # lsblk and # lspci?

Got that for you below.

> I see a Seagate drive is showing up in lsusb, but
> not showing in fdisk. Is this a good, Linux file s
> ystem formatted hdd and is it USB 2 or 3?

The Seagate part might be an adapter that slips over a 2.5" hard drive (used from a Toshiba laptop). The Seagate adapter goes from hard drive to a USB 3.0 plug. The hard drive is formatted Ext3 and I'd copied a bunch of files to it. The OS drive is a USB 2 SanDisk Glide @ 8 GB.

Here's the results here:

lsblk
root@DebianPlug:~# lsblk
NAME      MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda         8:0    1   7.3G  0 disk
`-sda1      8:1    1   7.2G  0 part /
sdb         8:16   0 465.8G  0 disk
zram0     253:0    0  22.1M  0 disk [SWAP]
zram1     253:1    0  22.1M  0 disk [SWAP]
zram2     253:2    0  22.1M  0 disk [SWAP]
zram3     253:3    0  22.1M  0 disk [SWAP]
mtdblock0  31:0    0    14M  0 disk
mtdblock1  31:1    0   114M  0 disk

Tried this too after seeing that in your diagnostics: lsblk -afm

NAME      FSTYPE LABEL  UUID                                 MOUNTPOINT NAME        SIZE OWNER GROUP  MODE
sda                                                                     sda         7.3G root  floppy brw-rw---T
`-sda1    ext3   rootfs c506c475-6973-4ad0-b8d2-6d0401f82880 /          `-sda1      7.2G root  floppy brw-rw---T
sdb                                                                     sdb       465.8G root  floppy brw-rw---T
loop0                                                                   loop0            root  disk   brw-rw---T
loop1                                                                   loop1            root  disk   brw-rw---T
loop2                                                                   loop2            root  disk   brw-rw---T
loop3                                                                   loop3            root  disk   brw-rw---T
loop4                                                                   loop4            root  disk   brw-rw---T
loop5                                                                   loop5            root  disk   brw-rw---T
loop6                                                                   loop6            root  disk   brw-rw---T
loop7                                                                   loop7            root  disk   brw-rw---T
zram0     swap          ac619b47-db81-45e4-abcf-785bdfac7e9b [SWAP]     zram0      22.1M root  disk   brw-rw---T
zram1     swap          11e7b621-0c17-4819-9180-917036d34dec [SWAP]     zram1      22.1M root  disk   brw-rw---T
zram2     swap          2da87ded-2475-43ee-a2a3-b1cf04de1b66 [SWAP]     zram2      22.1M root  disk   brw-rw---T
zram3     swap          62d505d7-3e93-4112-903d-d6debba3450a [SWAP]     zram3      22.1M root  disk   brw-rw---T
mtdblock0                                                               mtdblock0    14M root  disk   brw-rw---T
mtdblock1                                                               mtdblock1   114M root  disk   brw-rw---T
root@DebianPlug:~#
root@DebianPlug:~#



lspci
root@DebianPlug:~# lspci
00:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)
root@DebianPlug:~#

dmesg
root@DebianPlug:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.48-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Pogoplug V3 Pro
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c08a6980, node_mem_map c7ef9000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[    0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[    0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 117048K/131072K available (6406K kernel code, 288K rwdata, 1908K rodata, 228K init, 247K bss, 14024K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0826ddc   (8316 kB)
      .init : 0xc0827000 - 0xc0860000   ( 228 kB)
      .data : 0xc0860000 - 0xc08a8338   ( 289 kB)
       .bss : 0xc08a8338 - 0xc08e6310   ( 248 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:160
[    0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[    0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[    0.000163] Console: colour dummy device 80x30
[    0.000194] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[    0.050024] pid_max: default: 32768 minimum: 301
[    0.050188] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050206] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051010] Initializing cgroup subsys net_cls
[    0.051092] CPU: Testing write buffer coherency: ok
[    0.051517] Setting up static identity map for 0x60008220 - 0x60008258
[    0.190133] Brought up 2 CPUs
[    0.190156] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[    0.190937] devtmpfs: initialized
[    0.195960] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196226] prandom: seed boundary self test passed
[    0.200642] prandom: 100 self tests passed
[    0.200668] pinctrl core: initialized pinctrl subsystem
[    0.201489] NET: Registered protocol family 16
[    0.202030] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.230016] cpuidle: using governor ladder
[    0.260014] cpuidle: using governor menu
[    0.265059] gpio-oxnas 44000000.gpio: at address c8848000
[    0.265446] gpio-oxnas 44100000.gpio: at address c884a000
[    0.266004] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[    0.388620] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[    0.388705] oxnas-pcie 47c00000.pcie-controller: link up
[    0.389012] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[    0.389038] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[    0.389056] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[    0.389071] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[    0.389089] pci_bus 0000:00: root bus resource [bus 00-7f]
[    0.389148] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[    0.389240] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[    0.389419] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.389770] PCI: bus0: Fast back to back transfers disabled
[    0.389862] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[    0.390405] vgaarb: loaded
[    0.390896] SCSI subsystem initialized
[    0.391257] libata version 3.00 loaded.
[    0.391774] usbcore: registered new interface driver usbfs
[    0.391879] usbcore: registered new interface driver hub
[    0.392035] usbcore: registered new device driver usb
[    0.392248] pps_core: LinuxPPS API ver. 1 registered
[    0.392263] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.392307] PTP clock support registered
[    0.394439] clocksource: Switched to clocksource rps_clocksource_timer
[    0.412840] NET: Registered protocol family 2
[    0.413734] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.413775] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.413808] TCP: Hash tables configured (established 1024 bind 1024)
[    0.413905] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.413946] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.414210] NET: Registered protocol family 1
[    0.414750] RPC: Registered named UNIX socket transport module.
[    0.414771] RPC: Registered udp transport module.
[    0.414781] RPC: Registered tcp transport module.
[    0.414794] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.414855] pci 0000:00:00.0: enabling device (0140 -> 0142)
[    0.414927] PCI: CLS 32 bytes, default 32
[    0.415260] Unpacking initramfs...
[    0.805478] Freeing initrd memory: 3644K (c7a99000 - c7e28000)
[    0.806868] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.807032] Initialise system trusted keyring
[    0.819801] zbud: loaded
[    0.825126] NFS: Registering the id_resolver key type
[    0.825187] Key type id_resolver registered
[    0.825203] Key type id_legacy registered
[    0.825244] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.825267] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.826219] fuse init (API version 7.23)
[    0.828200] Key type big_key registered
[    0.905963] Key type asymmetric registered
[    0.905996] Asymmetric key parser 'x509' registered
[    0.906124] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.906150] io scheduler noop registered
[    0.906170] io scheduler deadline registered
[    0.906229] io scheduler cfq registered (default)
[    0.906867] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.908523] console [ttyS0] disabled
[    0.908618] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[    1.494151] console [ttyS0] enabled
[    1.509015] loop: module loaded
[    1.761057] scsi host0: sata_oxnas
[    1.814277] ata1: SATA max UDMA/133 irq 7
[    1.818370] sata_oxnas: resetting SATA core
[    1.819456] nand: Could not find valid ONFI parameter page; aborting
[    1.819496] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[    1.819502] nand: Hynix NAND 128MiB 3,3V 8-bit
[    1.819509] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.819527] Scanning device for bad blocks
[    1.902031] 2 ofpart partitions found on MTD device 41000000.nand
[    1.908101] Creating 2 MTD partitions on "41000000.nand":
[    1.913505] 0x000000000000-0x000000e00000 : "boot"
[    1.920281] 0x000000e00000-0x000008000000 : "data"
[    1.927569] oxnas-gmac 40400000.ethernet: no reset control found
[    1.933611] stmmac - user ID: 0x12, Synopsys ID: 0x35
[    1.938636]  Ring mode enabled
[    1.941696]  DMA HW capability register supported
[    1.946201]  Enhanced/Alternate descriptors
[    1.950551]  Enabled extended descriptors
[    1.954539]  RX Checksum Offload Engine supported (type 2)
[    1.960025]  TX Checksum insertion supported
[    1.964270]  Wake-Up On Lan supported
[    1.967907]  Enable RX Mitigation via HW Watchdog Timer
[    1.989017] libphy: stmmac: probed
[    1.992471] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[    1.998883] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[    2.005578] PPP generic driver version 2.4.2
[    2.010529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.017036] ehci-pci: EHCI PCI platform driver
[    2.021931] oxnas-ehci 40200100.ehci: EHCI Host Controller
[    2.027430] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[    2.035297] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[    2.060011] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[    2.066362] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.073180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.080404] usb usb1: Product: EHCI Host Controller
[    2.085260] usb usb1: Manufacturer: Linux 4.4.48-oxnas-tld-1 ehci_hcd
[    2.091694] usb usb1: SerialNumber: 40200100.ehci
[    2.097341] hub 1-0:1.0: USB hub found
[    2.101199] hub 1-0:1.0: 2 ports detected
[    2.106211] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    2.111521] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[    2.124441] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    2.133332] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.140154] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.147343] usb usb2: Product: xHCI Host Controller
[    2.152222] usb usb2: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[    2.158632] usb usb2: SerialNumber: 0000:00:00.0
[    2.164218] hub 2-0:1.0: USB hub found
[    2.168033] hub 2-0:1.0: 2 ports detected
[    2.172958] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    2.178183] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[    2.185784] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.194150] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    2.201157] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.208348] usb usb3: Product: xHCI Host Controller
[    2.210150] ata1: SATA link down (SStatus 0 SControl 300)
[    2.218657] usb usb3: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[    2.225100] usb usb3: SerialNumber: 0000:00:00.0
[    2.230743] hub 3-0:1.0: USB hub found
[    2.234570] hub 3-0:1.0: 2 ports detected
[    2.239685] usbcore: registered new interface driver cdc_acm
[    2.245373] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.253491] usbcore: registered new interface driver cdc_wdm
[    2.259335] usbcore: registered new interface driver usb-storage
[    2.265566] usbcore: registered new interface driver usbserial
[    2.271769] usbcore: registered new interface driver usbserial_generic
[    2.278330] usbserial: USB Serial support registered for generic
[    2.284776] mousedev: PS/2 mouse device common for all mice
[    2.290544] i2c /dev entries driver
[    2.295354] hidraw: raw HID events driver (C) Jiri Kosina
[    2.301278] usbcore: registered new interface driver usbhid
[    2.306826] usbhid: USB HID core driver
[    2.312683] NET: Registered protocol family 10
[    2.330549] sit: IPv6 over IPv4 tunneling driver
[    2.336130] NET: Registered protocol family 17
[    2.341521] Key type dns_resolver registered
[    2.347097] registered taskstats version 1
[    2.351262] Loading compiled-in X.509 certificates
[    2.356239] zswap: loaded using pool lzo/zbud
[    2.376606] Key type encrypted registered
[    2.384012] Freeing unused kernel memory: 228K (c0827000 - c0860000)
[    2.420075] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[    2.526571] udevd[99]: starting version 175
[    2.572149] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.578839] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.610088] usb 1-1: Product: USB2.0 Hub
[    2.623237] hub 1-1:1.0: USB hub found
[    2.633182] hub 1-1:1.0: 4 ports detected
[    2.941585] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci
[    3.061893] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5575
[    3.068759] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.092190] usb 1-1.1: Product: Cruzer Glide
[    3.096450] usb 1-1.1: Manufacturer: SanDisk
[    3.100766] usb 1-1.1: SerialNumber: 4C530201370809103182
[    3.107960] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    3.114805] scsi host1: usb-storage 1-1.1:1.0
[    3.143144] usbcore: registered new interface driver uas
[    4.121195] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.27 PQ: 0 ANSI: 6
[    4.133985] sd 1:0:0:0: [sda] 15330304 512-byte logical blocks: (7.85 GB/7.31 GiB)
[    4.143902] sd 1:0:0:0: [sda] Write Protect is off
[    4.148697] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[    4.149808] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.179683]  sda: sda1
[    4.187064] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   13.446412] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   13.491136] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   15.008714] udevd[297]: starting version 175
[   16.895462] EXT4-fs (sda1): re-mounted. Opts: (null)
[   17.190289] random: nonblocking pool is initialized
[   17.195261] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   20.349383] Adding 1048572k swap on /swapfile1.  Priority:-1 extents:360 across:1169636k FS
[   23.152112] zram: Added device: zram0
[   23.172615] zram: Added device: zram1
[   23.186810] zram: Added device: zram2
[   23.211320] zram: Added device: zram3
[   23.237949] zram0: detected capacity change from 0 to 23220224
[   23.317455] Adding 22672k swap on /dev/zram0.  Priority:10 extents:1 across:22672k SSFS
[   23.335470] zram1: detected capacity change from 0 to 23220224
[   23.398763] Adding 22672k swap on /dev/zram1.  Priority:10 extents:1 across:22672k SSFS
[   23.409781] zram2: detected capacity change from 0 to 23220224
[   23.474910] Adding 22672k swap on /dev/zram2.  Priority:10 extents:1 across:22672k SSFS
[   23.486512] zram3: detected capacity change from 0 to 23220224
[   23.574958] Adding 22672k swap on /dev/zram3.  Priority:10 extents:1 across:22672k SSFS
[   28.880153] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   49.137761] zram: Cannot change disksize for initialized device
[   49.227724] zram: Cannot change disksize for initialized device
[   49.314690] zram: Cannot change disksize for initialized device
[   49.394734] zram: Cannot change disksize for initialized device
[  137.494873] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[  137.526282] usb 3-2: New USB device found, idVendor=0bc2, idProduct=ab00
[  137.533009] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  137.540546] usb 3-2: Product: Slim
[  137.543941] usb 3-2: Manufacturer: Seagate
[  137.548016] usb 3-2: SerialNumber: 52AB4031F0QZ
[  137.569395] scsi host2: uas
[  137.832714] scsi 2:0:0:0: Direct-Access     Seagate  Slim             6408 PQ: 0 ANSI: 6
[  137.844544] sd 2:0:0:0: [sdb] Spinning up disk...
root@DebianPlug:~#

I'll get to bed because it's garbage night with high winds and I know the can is going to be way down the street when I wake up LOL Thanks a lot for looking at this Jeff & Bodhi

=========
-=Cloud 9=-



Edited 1 time(s). Last edit at 03/21/2017 11:33PM by JoeyPogoPlugE02.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 02:27AM
@Joey.

Everything looks good. But you need to create the USB partition correctly. There is no partition on the drive

root@DebianPlug:~# lsblk
NAME      MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda         8:0    1   7.3G  0 disk
`-sda1      8:1    1   7.2G  0 part /
sdb         8:16   0 465.8G  0 disk
zram0     253:0    0  22.1M  0 disk [SWAP]
zram1     253:1    0  22.1M  0 disk [SWAP]
zram2     253:2    0  22.1M  0 disk [SWAP]
zram3     253:3    0  22.1M  0 disk [SWAP]
mtdblock0  31:0    0    14M  0 disk
mtdblock1  31:1    0   114M  0 disk

See the sda partition listed above:
sda         8:0    1   7.3G  0 disk
`-sda1      8:1    1   7.2G  0 part /
and now the USB 3.0 disk
sdb         8:16   0 465.8G  0 disk

If the partition was created correctly, then you would see a similar line for sdb1.

And by the way, you can install a full Linux Mint on USB drive, there is no need for hard disk. After you booted with the Live Mint USB, plug in another USB drive and install Mint to that drive.


@Jeff

Quote

Does this device use the Renesas uPD720202 chipset? It says "based on". Isn't the driver available in kernel for this for x86? Is there an ARM specific version or do you have to recompile it from source? Have you guys ID'd the new hardware in dmesg yet?

The PCIe driver is OK. This Pogo V3 box uses its own pcie-oxnas driver.

The Intel xHCI driver (USB 3.0) is already mainline (this is used in the Pogo V4 too). So as they advertised that this card FW implemented Intel xHCI standard, I hope that will work. So far it does look like it's working. Joey just needs to get the drive format correctly. Then we will see.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 05:47AM
JoeyPogoPlugE02 Wrote:
-------------------------------------------------------
> dmesg
>
> root@DebianPlug:~# dmesg
> .
> :
> [  137.494873] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
> [  137.526282] usb 3-2: New USB device found, idVendor=0bc2, idProduct=ab00
> [  137.533009] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
> [  137.540546] usb 3-2: Product: Slim
> [  137.543941] usb 3-2: Manufacturer: Seagate
> [  137.548016] usb 3-2: SerialNumber: 52AB4031F0QZ
> [  137.569395] scsi host2: uas
> [  137.832714] scsi 2:0:0:0: Direct-Access     Seagate  Slim             6408 PQ: 0 ANSI: 6
> [  137.844544] sd 2:0:0:0: [sdb] Spinning up disk.
> ..
> root@DebianPlug:~#
> 
>
>
Joey,

What comes after the above last line ([ 137.844544] sd 2:0:0:0: [sdb] Spinning up disk.) of your dmesg output? If there is no activity shown w.r.t the HDD, then there is a chance (I could be wrong) the HDD does not get enough power to spin up.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 02:21PM
@ everyone:
It looks very much like Habibie is right about the low power. I checked with my meter and of two 5v supplies, one is 4.6v and the other is 4.1v. One of these is a heavier-duty (supposedly) that's used to power 3.5" hard drives when an adapter is used to get SATA to USB. I haven't re-tried Pogoplug's own 5v out, but... we've been there.

* yes bodhi I installed CinnoMint 18.1 to USB and formatted the drive again. Right before I did that Mint complained it couldn't mount it because of a superblock error, and I thought " aha! that's it!" but no it wasn't all of it LOL I got a screenshot but saved it on the USB stick.

So it looks like my 5v supplies are few and far between here. Of course I'll try something heavier like a desktop computer wired out to it but I don't think I can do it today.

Below are some commands I ran once the Ext4-formatted hard drive was plugged into the USB 3 port.
My sincere thanks for everyone's time and expertise. I'll be here in the background trying to get better quality control. I'm near giving up on this project because it's hard to imagine a good power supply that isn't wasting enough power overall to negate its diminishing returns, is that t? Not done yet, just almost.

Check ye:


root@DebianPlug:~# fdisk -l

Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa

Device           Boot      Start        End    Sectors   Size Id Type
/dev/mtdblock0p1 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p2 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p3 ?    2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ?    2863311530 5721052499 2857740970   1.3T aa unknown

Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01ecce21

Device     Boot Start      End  Sectors  Size Id Type
/dev/sda1        2048 15147007 15144960  7.2G 83 Linux

Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
root@DebianPlug:~# lspci
00:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)
root@DebianPlug:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.48-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Pogoplug V3 Pro
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c08a6980, node_mem_map c7ef9000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[    0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[    0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 117048K/131072K available (6406K kernel code, 288K rwdata, 1908K rodata, 228K init, 247K bss, 14024K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0826ddc   (8316 kB)
      .init : 0xc0827000 - 0xc0860000   ( 228 kB)
      .data : 0xc0860000 - 0xc08a8338   ( 289 kB)
       .bss : 0xc08a8338 - 0xc08e6310   ( 248 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:160
[    0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[    0.000007] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[    0.000161] Console: colour dummy device 80x30
[    0.000192] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[    0.050019] pid_max: default: 32768 minimum: 301
[    0.050183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051005] Initializing cgroup subsys net_cls
[    0.051092] CPU: Testing write buffer coherency: ok
[    0.051512] Setting up static identity map for 0x60008220 - 0x60008258
[    0.190136] Brought up 2 CPUs
[    0.190159] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[    0.190940] devtmpfs: initialized
[    0.196042] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196305] prandom: seed boundary self test passed
[    0.200721] prandom: 100 self tests passed
[    0.200747] pinctrl core: initialized pinctrl subsystem
[    0.201556] NET: Registered protocol family 16
[    0.202091] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.230016] cpuidle: using governor ladder
[    0.260014] cpuidle: using governor menu
[    0.265062] gpio-oxnas 44000000.gpio: at address c8848000
[    0.265446] gpio-oxnas 44100000.gpio: at address c884a000
[    0.266017] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[    0.388659] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[    0.388743] oxnas-pcie 47c00000.pcie-controller: link up
[    0.389056] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[    0.389081] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[    0.389099] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[    0.389114] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[    0.389132] pci_bus 0000:00: root bus resource [bus 00-7f]
[    0.389196] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[    0.389286] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[    0.389468] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.389836] PCI: bus0: Fast back to back transfers disabled
[    0.389928] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[    0.390481] vgaarb: loaded
[    0.390973] SCSI subsystem initialized
[    0.391336] libata version 3.00 loaded.
[    0.391866] usbcore: registered new interface driver usbfs
[    0.391976] usbcore: registered new interface driver hub
[    0.392135] usbcore: registered new device driver usb
[    0.392345] pps_core: LinuxPPS API ver. 1 registered
[    0.392360] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.392407] PTP clock support registered
[    0.394503] clocksource: Switched to clocksource rps_clocksource_timer
[    0.413158] NET: Registered protocol family 2
[    0.414046] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.414087] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.414120] TCP: Hash tables configured (established 1024 bind 1024)
[    0.414215] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.414259] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.414517] NET: Registered protocol family 1
[    0.415065] RPC: Registered named UNIX socket transport module.
[    0.415086] RPC: Registered udp transport module.
[    0.415096] RPC: Registered tcp transport module.
[    0.415109] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.415170] pci 0000:00:00.0: enabling device (0140 -> 0142)
[    0.415242] PCI: CLS 32 bytes, default 32
[    0.415577] Unpacking initramfs...
[    0.805690] Freeing initrd memory: 3644K (c7a99000 - c7e28000)
[    0.807111] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.807280] Initialise system trusted keyring
[    0.820398] zbud: loaded
[    0.825538] NFS: Registering the id_resolver key type
[    0.825600] Key type id_resolver registered
[    0.825615] Key type id_legacy registered
[    0.825658] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.825684] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.826595] fuse init (API version 7.23)
[    0.828597] Key type big_key registered
[    0.906647] Key type asymmetric registered
[    0.906680] Asymmetric key parser 'x509' registered
[    0.906810] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.906839] io scheduler noop registered
[    0.906859] io scheduler deadline registered
[    0.906918] io scheduler cfq registered (default)
[    0.907558] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.909184] console [ttyS0] disabled
[    0.909283] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[    1.494935] console [ttyS0] enabled
[    1.509813] loop: module loaded
[    1.761843] scsi host0: sata_oxnas
[    1.815080] ata1: SATA max UDMA/133 irq 7
[    1.819174] sata_oxnas: resetting SATA core
[    1.820303] nand: Could not find valid ONFI parameter page; aborting
[    1.820344] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[    1.820349] nand: Hynix NAND 128MiB 3,3V 8-bit
[    1.820359] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.820377] Scanning device for bad blocks
[    1.902233] 2 ofpart partitions found on MTD device 41000000.nand
[    1.908298] Creating 2 MTD partitions on "41000000.nand":
[    1.913702] 0x000000000000-0x000000e00000 : "boot"
[    1.920442] 0x000000e00000-0x000008000000 : "data"
[    1.927726] oxnas-gmac 40400000.ethernet: no reset control found
[    1.933765] stmmac - user ID: 0x12, Synopsys ID: 0x35
[    1.938785]  Ring mode enabled
[    1.941847]  DMA HW capability register supported
[    1.946352]  Enhanced/Alternate descriptors
[    1.950704]  Enabled extended descriptors
[    1.954690]  RX Checksum Offload Engine supported (type 2)
[    1.960161]  TX Checksum insertion supported
[    1.964403]  Wake-Up On Lan supported
[    1.968043]  Enable RX Mitigation via HW Watchdog Timer
[    1.988928] libphy: stmmac: probed
[    1.992376] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[    1.998786] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[    2.005570] PPP generic driver version 2.4.2
[    2.010536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.017047] ehci-pci: EHCI PCI platform driver
[    2.021941] oxnas-ehci 40200100.ehci: EHCI Host Controller
[    2.027438] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[    2.035302] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[    2.060001] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[    2.066327] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.073154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.080373] usb usb1: Product: EHCI Host Controller
[    2.085232] usb usb1: Manufacturer: Linux 4.4.48-oxnas-tld-1 ehci_hcd
[    2.091665] usb usb1: SerialNumber: 40200100.ehci
[    2.097295] hub 1-0:1.0: USB hub found
[    2.101153] hub 1-0:1.0: 2 ports detected
[    2.106142] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    2.111452] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[    2.124362] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    2.133263] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.140067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.147256] usb usb2: Product: xHCI Host Controller
[    2.152138] usb usb2: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[    2.158548] usb usb2: SerialNumber: 0000:00:00.0
[    2.164154] hub 2-0:1.0: USB hub found
[    2.167971] hub 2-0:1.0: 2 ports detected
[    2.172912] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    2.178137] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[    2.185751] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.194129] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    2.201126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.208322] usb usb3: Product: xHCI Host Controller
[    2.210147] ata1: SATA link down (SStatus 0 SControl 300)
[    2.218629] usb usb3: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[    2.225075] usb usb3: SerialNumber: 0000:00:00.0
[    2.230730] hub 3-0:1.0: USB hub found
[    2.234554] hub 3-0:1.0: 2 ports detected
[    2.239677] usbcore: registered new interface driver cdc_acm
[    2.245368] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.253493] usbcore: registered new interface driver cdc_wdm
[    2.259351] usbcore: registered new interface driver usb-storage
[    2.265576] usbcore: registered new interface driver usbserial
[    2.271777] usbcore: registered new interface driver usbserial_generic
[    2.278338] usbserial: USB Serial support registered for generic
[    2.284789] mousedev: PS/2 mouse device common for all mice
[    2.290560] i2c /dev entries driver
[    2.295377] hidraw: raw HID events driver (C) Jiri Kosina
[    2.301299] usbcore: registered new interface driver usbhid
[    2.306849] usbhid: USB HID core driver
[    2.312788] NET: Registered protocol family 10
[    2.330547] sit: IPv6 over IPv4 tunneling driver
[    2.336140] NET: Registered protocol family 17
[    2.341532] Key type dns_resolver registered
[    2.347102] registered taskstats version 1
[    2.351272] Loading compiled-in X.509 certificates
[    2.356252] zswap: loaded using pool lzo/zbud
[    2.376750] Key type encrypted registered
[    2.384069] Freeing unused kernel memory: 228K (c0827000 - c0860000)
[    2.420093] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[    2.527792] udevd[99]: starting version 175
[    2.572014] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.578700] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.600133] usb 1-1: Product: USB2.0 Hub
[    2.627077] hub 1-1:1.0: USB hub found
[    2.636707] hub 1-1:1.0: 4 ports detected
[    2.930214] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci
[    3.051207] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5575
[    3.058060] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.065418] usb 1-1.1: Product: Cruzer Glide
[    3.069667] usb 1-1.1: Manufacturer: SanDisk
[    3.073984] usb 1-1.1: SerialNumber: 4C530201370809103182
[    3.081349] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    3.088097] scsi host1: usb-storage 1-1.1:1.0
[    3.116170] usbcore: registered new interface driver uas
[    4.091824] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.27 PQ: 0 ANSI: 6
[    4.107750] sd 1:0:0:0: [sda] 15330304 512-byte logical blocks: (7.85 GB/7.31 GiB)
[    4.118469] sd 1:0:0:0: [sda] Write Protect is off
[    4.123645] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[    4.124684] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.146173]  sda: sda1
[    4.153927] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   13.421104] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   13.443412] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   14.945195] udevd[296]: starting version 175
[   16.800192] EXT4-fs (sda1): re-mounted. Opts: (null)
[   17.080248] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   17.120517] random: nonblocking pool is initialized
[   20.252198] Adding 1048572k swap on /swapfile1.  Priority:-1 extents:360 across:1169636k FS
[   22.971755] zram: Added device: zram0
[   22.992330] zram: Added device: zram1
[   23.013939] zram: Added device: zram2
[   23.030574] zram: Added device: zram3
[   23.064058] zram0: detected capacity change from 0 to 23220224
[   23.137912] Adding 22672k swap on /dev/zram0.  Priority:10 extents:1 across:22672k SSFS
[   23.150750] zram1: detected capacity change from 0 to 23220224
[   23.214848] Adding 22672k swap on /dev/zram1.  Priority:10 extents:1 across:22672k SSFS
[   23.225538] zram2: detected capacity change from 0 to 23220224
[   23.301084] Adding 22672k swap on /dev/zram2.  Priority:10 extents:1 across:22672k SSFS
[   23.311872] zram3: detected capacity change from 0 to 23220224
[   23.373706] Adding 22672k swap on /dev/zram3.  Priority:10 extents:1 across:22672k SSFS
[   28.790156] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   31.790126] oxnas-gmac 40400000.ethernet eth0: Link is Down
[   32.790159] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   35.790131] oxnas-gmac 40400000.ethernet eth0: Link is Down
[   36.790159] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   39.790133] oxnas-gmac 40400000.ethernet eth0: Link is Down
[   40.790159] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   43.790156] oxnas-gmac 40400000.ethernet eth0: Link is Down
[   44.790161] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   72.397716] zram: Cannot change disksize for initialized device
[   72.477928] zram: Cannot change disksize for initialized device
[   72.603338] zram: Cannot change disksize for initialized device
[   72.684208] zram: Cannot change disksize for initialized device
[  321.718433] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[  321.746432] usb 3-2: New USB device found, idVendor=0bc2, idProduct=ab00
[  321.753157] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  321.760291] usb 3-2: Product: Slim
[  321.763678] usb 3-2: Manufacturer: Seagate
[  321.767751] usb 3-2: SerialNumber: 52AB4031F0QZ
[  321.800286] scsi host2: uas
[  322.056330] scsi 2:0:0:0: Direct-Access     Seagate  Slim             6408 PQ: 0 ANSI: 6
[  322.066396] sd 2:0:0:0: [sdb] Spinning up disk...
[  323.080084] ...................................................................................................not responding...
[  422.335997] sd 2:0:0:0: [sdb] 312581807 512-byte logical blocks: (160 GB/149 GiB)
[  429.427466] xhci_hcd 0000:00:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[  429.436746] xhci_hcd 0000:00:00.0: @0000000066b0e8c0 00000000 00000000 1b000000 01038001
[  436.518812] xhci_hcd 0000:00:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[  436.528097] xhci_hcd 0000:00:00.0: @0000000066b0e900 00000000 00000000 1b000000 01038001
root@DebianPlug:~# lsusb
Bus 003 Device 002: ID 0bc2:ab00 Seagate RSS LLC
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

=========
-=Cloud 9=-



Edited 1 time(s). Last edit at 03/22/2017 02:25PM by JoeyPogoPlugE02.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 03:17PM
Joey,

Use a flash USB 3.0 drive and you will have enough power.
You did before and it worked.

The only problem you had at that tine was the partition format.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 03:32PM
JoeyPogoPlugE02 Wrote:
-------------------------------------------------------
>
> root@DebianPlug:~# dmesg
> .
> :
> [  321.718433] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
> [  321.746432] usb 3-2: New USB device found, idVendor=0bc2, idProduct=ab00
> [  321.753157] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
> [  321.760291] usb 3-2: Product: Slim
> [  321.763678] usb 3-2: Manufacturer: Seagate
> [  321.767751] usb 3-2: SerialNumber: 52AB4031F0QZ
> [  321.800286] scsi host2: uas
> [  322.056330] scsi 2:0:0:0: Direct-Access     Seagate  Slim             6408 PQ: 0 ANSI: 6
> [  322.066396] sd 2:0:0:0: [sdb] Spinning up disk.
> ..
> [  323.080084] ...................................................................................................not responding...
> [  422.335997] sd 2:0:0:0: [sdb] 312581807 512-byte logical blocks: (160 GB/149 GiB)
> [  429.427466] xhci_hcd 0000:00:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
> [  429.436746] xhci_hcd 0000:00:00.0: @0000000066b0e8c0 00000000 00000000 1b000000 01038001
> [  436.518812] xhci_hcd 0000:00:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
> [  436.528097] xhci_hcd 0000:00:00.0: @0000000066b0e900 00000000 00000000 1b000000 01038001
> root@DebianPlug:~# lsusb
> Bus 003 Device 002: ID 0bc2:ab00 Seagate RSS LLC
> Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
> Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> 
>
Joey,

I noticed from the above output of dmesg, you have a Seagate Slim 1TB SATA HDD(?) that is USB powered. If so, then any USB ports on a PogoPlug Pro should be able to deliver enough power to it. When, I tried a 2 TB Seagate 2.5" SATA HDD on my PogoPlug Pro and any of its USB2 ports had no problem to deliver power to the HDD.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 04:36PM
> If so, then any USB ports on a PogoPlug Pro sho
> uld be able to deliver enough power to it. When, I
> tried a 2 TB Seagate 2.5" SATA HDD on my PogoPlug
> Pro and any of its USB2 ports had no problem to de
> liver power to the HDD.

Correct. The USB port should provide 5V and enough Amp to run USB 2.5" HDD.

However, I would not use USB HDD for this test, so that we can eliminate a variable out of potential problems.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 06:33PM
Yeah Pogoplug's own USB 5v really is 5 volts.
I just tried starting it up and mounting the hard drive one last time and right when it was mounting it froze. It acted a lot friendlier than previous trials. So I'll try one last time with a USB stick formatted from Mint, and shelve this and have answered the question.

It's just not fun and even if it worked it's impracticable from being touchy from 10 angles. So here goes, give me a little bit.

=========
-=Cloud 9=-
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 06:42PM
OK Joey!

I've just test it with my USB power hub. It works fine :) I just dig out my Orico USB 3.0 power hub and connect it to one of the USB port on the daughter card.

Let me post the result here in a moment.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner



Edited 1 time(s). Last edit at 03/22/2017 06:44PM by bodhi.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 07:04PM
root@PogoPro:~# dmesg 
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.54-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Pogoplug V3 Pro
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c08a69c0, node_mem_map c7ef9000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[    0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[    0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data) earlyprintk=serial
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 116688K/131072K available (6410K kernel code, 288K rwdata, 1908K rodata, 224K init, 247K bss, 14384K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0827e14   (8320 kB)
      .init : 0xc0828000 - 0xc0860000   ( 224 kB)
      .data : 0xc0860000 - 0xc08a8378   ( 289 kB)
       .bss : 0xc08a8378 - 0xc08e6350   ( 248 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:160
[    0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[    0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[    0.008343] Console: colour dummy device 80x30
[    0.012902] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440)
[    0.062597] pid_max: default: 32768 minimum: 301
[    0.067443] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.074150] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.082122] Initializing cgroup subsys net_cls
[    0.086699] CPU: Testing write buffer coherency: ok
[    0.092119] Setting up static identity map for 0x60008220 - 0x60008258
[    0.229957] Brought up 2 CPUs
[    0.233003] SMP: Total of 2 processors activated (638.97 BogoMIPS).
[    0.240194] devtmpfs: initialized
[    0.249077] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.259033] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.265548] prandom: seed boundary self test passed
[    0.275151] prandom: 100 self tests passed
[    0.279324] pinctrl core: initialized pinctrl subsystem
[    0.285550] NET: Registered protocol family 16
[    0.290718] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.319823] cpuidle: using governor ladder
[    0.349813] cpuidle: using governor menu
[    0.359272] gpio-oxnas 44000000.gpio: at address c8848000
[    0.365199] gpio-oxnas 44100000.gpio: at address c884a000
[    0.371302] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[    0.501606] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[    0.509061] oxnas-pcie 47c00000.pcie-controller: link up
[    0.514780] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[    0.522191] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[    0.529123] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[    0.536514] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[    0.542871] pci_bus 0000:00: root bus resource [bus 00-7f]
[    0.548467] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[    0.548559] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[    0.548746] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.549125] PCI: bus0: Fast back to back transfers disabled
[    0.554880] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[    0.562759] vgaarb: loaded
[    0.566044] SCSI subsystem initialized
[    0.570283] libata version 3.00 loaded.
[    0.570813] usbcore: registered new interface driver usbfs
[    0.576453] usbcore: registered new interface driver hub
[    0.582023] usbcore: registered new device driver usb
[    0.587348] pps_core: LinuxPPS API ver. 1 registered
[    0.592417] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.601661] PTP clock support registered
[    0.607953] clocksource: Switched to clocksource rps_clocksource_timer
[    0.634513] NET: Registered protocol family 2
[    0.639920] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.646970] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.653442] TCP: Hash tables configured (established 1024 bind 1024)
[    0.659978] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.665899] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.672524] NET: Registered protocol family 1
[    0.677529] RPC: Registered named UNIX socket transport module.
[    0.683560] RPC: Registered udp transport module.
[    0.688327] RPC: Registered tcp transport module.
[    0.693114] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.699663] pci 0000:00:00.0: enabling device (0140 -> 0142)
[    0.705469] PCI: CLS 32 bytes, default 32
[    0.705843] Unpacking initramfs...
[    1.164974] Freeing initrd memory: 4004K (c7a43000 - c7e2c000)
[    1.172559] Initialise system trusted keyring
[    1.190725] zbud: loaded
[    1.211251] NFS: Registering the id_resolver key type
[    1.216417] Key type id_resolver registered
[    1.220746] Key type id_legacy registered
[    1.224862] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.231654] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.239083] fuse init (API version 7.23)
[    1.245299] Key type big_key registered
[    1.333611] Key type asymmetric registered
[    1.337792] Asymmetric key parser 'x509' registered
[    1.343009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.350691] io scheduler noop registered
[    1.354693] io scheduler deadline registered
[    1.359088] io scheduler cfq registered (default)
[    1.364643] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    1.372782] console [ttyS0] disabled
[    1.376512] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[    1.385254] console [ttyS0] enabled
[    1.392355] bootconsole [earlycon0] disabled
[    1.449541] loop: module loaded
[    1.454845] scsi host0: sata_oxnas
[    1.458785] ata1: SATA max UDMA/133 irq 7
[    1.462919] sata_oxnas: resetting SATA core
[    1.464005] nand: Could not find valid ONFI parameter page; aborting
[    1.464048] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[    1.464053] nand: Hynix NAND 128MiB 3,3V 8-bit
[    1.464064] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.464081] Scanning device for bad blocks
[    1.547010] 2 cmdlinepart partitions found on MTD device 41000000.nand
[    1.553536] Creating 2 MTD partitions on "41000000.nand":
[    1.558932] 0x000000000000-0x000000e00000 : "boot"
[    1.565806] 0x000000e00000-0x000008000000 : "data"
[    1.573227] oxnas-gmac 40400000.ethernet: no reset control found
[    1.579220] stmmac - user ID: 0x12, Synopsys ID: 0x35
[    1.584281]  Ring mode enabled
[    1.587320]  DMA HW capability register supported
[    1.591843]  Enhanced/Alternate descriptors
[    1.596175] 	Enabled extended descriptors
[    1.600176]  RX Checksum Offload Engine supported (type 2)
[    1.605632]  TX Checksum insertion supported
[    1.609873]  Wake-Up On Lan supported
[    1.613529]  Enable RX Mitigation via HW Watchdog Timer
[    1.635944] libphy: stmmac: probed
[    1.639342] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[    1.645849] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[    1.652664] PPP generic driver version 2.4.2
[    1.657559] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.664209] ehci-pci: EHCI PCI platform driver
[    1.669050] oxnas-ehci 40200100.ehci: EHCI Host Controller
[    1.674659] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[    1.682549] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[    1.699950] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[    1.706283] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.713080] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.720289] usb usb1: Product: EHCI Host Controller
[    1.725148] usb usb1: Manufacturer: Linux 4.4.54-oxnas-tld-1 ehci_hcd
[    1.731573] usb usb1: SerialNumber: 40200100.ehci
[    1.737256] hub 1-0:1.0: USB hub found
[    1.741153] hub 1-0:1.0: 2 ports detected
[    1.746227] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    1.751595] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[    1.849817] ata1: SATA link down (SStatus 0 SControl 310)
[    1.869160] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    1.878036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.884830] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.892039] usb usb2: Product: xHCI Host Controller
[    1.896898] usb usb2: Manufacturer: Linux 4.4.54-oxnas-tld-1 xhci-hcd
[    1.903326] usb usb2: SerialNumber: 0000:00:00.0
[    1.908999] hub 2-0:1.0: USB hub found
[    1.912896] hub 2-0:1.0: 2 ports detected
[    1.917811] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    1.923138] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[    1.930772] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.939112] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.946101] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.953326] usb usb3: Product: xHCI Host Controller
[    1.958179] usb usb3: Manufacturer: Linux 4.4.54-oxnas-tld-1 xhci-hcd
[    1.964625] usb usb3: SerialNumber: 0000:00:00.0
[    1.970368] hub 3-0:1.0: USB hub found
[    1.974182] hub 3-0:1.0: 2 ports detected
[    1.979635] usbcore: registered new interface driver cdc_acm
[    1.985369] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.993538] usbcore: registered new interface driver cdc_wdm
[    1.999413] usbcore: registered new interface driver usb-storage
[    2.005913] usbcore: registered new interface driver usbserial
[    2.012065] usbcore: registered new interface driver usbserial_generic
[    2.018624] usbserial: USB Serial support registered for generic
[    2.025077] mousedev: PS/2 mouse device common for all mice
[    2.030924] i2c /dev entries driver
[    2.035806] hidraw: raw HID events driver (C) Jiri Kosina
[    2.041569] usbcore: registered new interface driver usbhid
[    2.047116] usbhid: USB HID core driver
[    2.053153] NET: Registered protocol family 10
[    2.059018] sit: IPv6 over IPv4 tunneling driver
[    2.063705] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[    2.071464] NET: Registered protocol family 17
[    2.076060] Key type dns_resolver registered
[    2.082296] registered taskstats version 1
[    2.086420] Loading compiled-in X.509 certificates
[    2.091407] zswap: loaded using pool lzo/zbud
[    2.113431] Key type encrypted registered
[    2.132866] Freeing unused kernel memory: 224K (c0828000 - c0860000)
[    2.232875] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.239567] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.246766] usb 1-1: Product: USB2.0 Hub
[    2.252318] hub 1-1:1.0: USB hub found
[    2.258042] hub 1-1:1.0: 4 ports detected
[    2.290403] systemd-udevd[101]: starting version 215
[    2.301137] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.350789] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[    2.376634] usb 3-2: New USB device found, idVendor=0781, idProduct=5583
[    2.421747] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.428879] usb 3-2: Product: Ultra Fit
[    2.450951] usb 3-2: Manufacturer: SanDisk
[    2.455055] usb 3-2: SerialNumber: xxxxxxxxxxxxxxxxx
[    2.483676] usb-storage 3-2:1.0: USB Mass Storage device detected
[    2.510289] scsi host1: usb-storage 3-2:1.0
[    2.560046] usb 1-1.4: new high-speed USB device number 3 using oxnas-ehci
[    2.672409] usb 1-1.4: New USB device found, idVendor=0781, idProduct=5583
[    2.679280] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.686830] usb 1-1.4: Product: Ultra Fit
[    2.690885] usb 1-1.4: Manufacturer: SanDisk
[    2.695144] usb 1-1.4: SerialNumber: xxxxxxxxxxxxxxxxx
[    2.706511] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[    2.730314] scsi host2: usb-storage 1-1.4:1.0
[    2.770055] usbcore: registered new interface driver uas
[    3.260236] xhci_hcd 0000:00:00.0: Cannot set link state.
[    3.265671] usb usb3-port1: cannot disable (err = -32)
[    3.511610] scsi 1:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[    3.524400] sd 1:0:0:0: [sda] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[    3.535800] sd 1:0:0:0: [sda] Write Protect is off
[    3.540966] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[    3.543216] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.561845]  sda: sda1
[    3.569479] sd 1:0:0:0: [sda] Attached SCSI removable disk
[    3.731578] scsi 2:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[    3.747105] sd 2:0:0:0: [sdb] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[    3.758906] sd 2:0:0:0: [sdb] Write Protect is off
[    3.763965] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    3.765347] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.785180]  sdb: sdb1
[    3.793684] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   12.846776] netpoll: netconsole: local port 6666
[   12.851678] netpoll: netconsole: local IPv4 address 192.168.0.222
[   12.857748] netpoll: netconsole: interface 'eth0'
[   12.862499] netpoll: netconsole: remote port 6666
[   12.867184] netpoll: netconsole: remote IPv4 address 192.168.0.220
[   12.873369] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[   12.880258] netpoll: netconsole: device eth0 not up yet, forcing it
[   13.033541] netpoll: netconsole: carrier detect appears untrustworthy, waiting 4 seconds
[   17.063815] console [netcon0] enabled
[   17.067471] netconsole: network logging started
[   17.383971] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   19.284183] systemd-udevd[331]: starting version 215
[   19.355240] random: udevd: uninitialized urandom read (16 bytes read, 104 bits of entropy available)
[   19.376271] random: udevd: uninitialized urandom read (16 bytes read, 104 bits of entropy available)
[   19.980774] random: nonblocking pool is initialized
[   21.836838] EXT4-fs (sdb1): re-mounted. Opts: (null)
[   22.190476] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[   23.738490] Adding 1048572k swap on /swapfile1.  Priority:-1 extents:8 across:1130492k FS
[   52.047895] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   52.060052] NFSD: starting 90-second grace period (net c089f940)


root@PogoPro:~# lspci
00:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)


root@PogoPro:~# lsusb
Bus 003 Device 002: ID 0781:5583 SanDisk Corp. 
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0781:5583 SanDisk Corp. 
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


root@PogoPro:~# fdisk -l

Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa

Device           Boot      Start        End    Sectors   Size Id Type
/dev/mtdblock0p1 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p2 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p3 ?    2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ?    2863311530 5721052499 2857740970   1.3T aa unknown

Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 14.3 GiB, 15376000000 bytes, 30031250 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000

Device     Boot Start      End  Sectors  Size Id Type
/dev/sda1          32 30031249 30031218 14.3G  c W95 FAT32 (LBA)

Disk /dev/sdb: 14.3 GiB, 15376000000 bytes, 30031250 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x6c109196

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1  *     2048 30031249 30029202 14.3G 83 Linux


root@PogoPro:~# e2label /dev/sdb1
rootfs

root@PogoPro:~# mount /dev/sdb1 /media/rootfs -o noatime

root@PogoPro:~# ll /media/rootfs
total 1048696
drwxr-xr-x  25 root root       4096 Jun  3  2016 .
drwxrwxrwx  15 root root       4096 Nov 23  2015 ..
drwxr-xr-x   2 root root       4096 Jun  3  2016 bin
drwxr-xr-x   5 root root       4096 Mar 19  2017 boot
drwxr-xr-x   2 root root       4096 Jul  4  2015 .cedata
-rw-r--r--   1 root root         30 May  8  2015 .ceid
drwxr-xr-x   5 root root       4096 Jan 21  2011 dev
drwxr-xr-x 105 root root       4096 Jun  5  2016 etc
drwxr-xr-x   2 root root       4096 Dec 14  2010 home
drwxr-xr-x  16 root root       4096 May 13  2016 lib
drwxrwxrwx   3 root root       4096 Jul  4  2015 localdisk
drwx------   2 root root      16384 Jan 21  2011 lost+found
drwxrwxrwx  15 root root       4096 Nov 23  2015 media
drwxr-xr-x   3 root root       4096 Apr 10  2015 mnt
drwxr-xr-x   3 root root       4096 Apr  5  2011 nonexistent
drwxr-xr-x   2 root root       4096 Jan 21  2011 opt
drwxr-xr-x   2 root root       4096 Dec 14  2010 proc
drwx------  20 root root       4096 Dec 12  2016 root
drwxr-xr-x   4 root root       4096 Mar  2  2015 run
drwxr-xr-x   2 root root       4096 Jun  5  2016 sbin
drwxr-xr-x   2 root root       4096 Mar  2  2015 .smb
drwxr-xr-x   2 root root       4096 Jan 21  2011 srv
-rw-------   1 root root 1073741824 Jun  3  2016 swapfile1
drwxr-xr-x   2 root root       4096 Dec 31  2010 sys
drwxrwxrwt   2 root root       4096 Dec 31 16:00 tmp
drwxr-xr-x  10 root root       4096 Jan 21  2011 usr
drwxr-xr-x  11 root root       4096 Dec 31 16:00 var


root@PogoPro:/localdisk/temp# hdparm -tT /dev/sdb

/dev/sdb:
 Timing cached reads:   374 MB in  2.00 seconds = 186.94 MB/sec
 Timing buffered disk reads:  78 MB in  3.05 seconds =  25.59 MB/sec


I will do the write test later tonight.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 07:26PM
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 07:28PM
Well congratulations bodhi, but I give up. Something about when this mounts it wrecks the operation of the Pogoplug. At first I mounted it as you can see, and couldn't find files I copied there after formatting in Mint. Then I couldn't copy files to it. So I tried mounting again and got error, but a lot of telling stuff on some of the diagnostics.

583.388052 looks about right :-/

login as: root
root@192.168.178.104's password:
Linux DebianPlug 4.4.48-oxnas-tld-1 #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Mar 22 20:12:08 2017 from 192.168.178.103
root@DebianPlug:~# mkdir -p /media/JoeyUSB3
root@DebianPlug:~# mount -o noatime /dev/sdb1 /media/JoeyUSB3
root@DebianPlug:~# mount -o noatime /dev/sdb1 /media/JoeyUSB3
mount: special device /dev/sdb1 does not exist
root@DebianPlug:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.48-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Wed Feb 15 02:59:11 PST 2017
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Pogoplug V3 Pro
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c08a6980, node_mem_map c7ef9000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[    0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[    0.000000] pcpu-alloc: s17696 r8192 d23264 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 117048K/131072K available (6406K kernel code, 288K rwdata, 1908K rodata, 228K init, 247K bss, 14024K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0826ddc   (8316 kB)
      .init : 0xc0827000 - 0xc0860000   ( 228 kB)
      .data : 0xc0860000 - 0xc08a8338   ( 289 kB)
       .bss : 0xc08a8338 - 0xc08e6310   ( 248 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:160
[    0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[    0.000007] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[    0.000161] Console: colour dummy device 80x30
[    0.000192] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[    0.050019] pid_max: default: 32768 minimum: 301
[    0.050183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051005] Initializing cgroup subsys net_cls
[    0.051087] CPU: Testing write buffer coherency: ok
[    0.051512] Setting up static identity map for 0x60008220 - 0x60008258
[    0.190133] Brought up 2 CPUs
[    0.190156] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[    0.190940] devtmpfs: initialized
[    0.195857] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196121] prandom: seed boundary self test passed
[    0.200537] prandom: 100 self tests passed
[    0.200565] pinctrl core: initialized pinctrl subsystem
[    0.201400] NET: Registered protocol family 16
[    0.201940] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.230018] cpuidle: using governor ladder
[    0.260011] cpuidle: using governor menu
[    0.265064] gpio-oxnas 44000000.gpio: at address c8848000
[    0.265456] gpio-oxnas 44100000.gpio: at address c884a000
[    0.266014] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[    0.388710] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[    0.388828] oxnas-pcie 47c00000.pcie-controller: link up
[    0.389137] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[    0.389160] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[    0.389176] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[    0.389191] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[    0.389207] pci_bus 0000:00: root bus resource [bus 00-7f]
[    0.389268] pci 0000:00:00.0: [1912:0015] type 00 class 0x0c0330
[    0.389358] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[    0.389539] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.389895] PCI: bus0: Fast back to back transfers disabled
[    0.390046] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48001fff 64bit]
[    0.390525] vgaarb: loaded
[    0.391016] SCSI subsystem initialized
[    0.391380] libata version 3.00 loaded.
[    0.391884] usbcore: registered new interface driver usbfs
[    0.391989] usbcore: registered new interface driver hub
[    0.392143] usbcore: registered new device driver usb
[    0.392355] pps_core: LinuxPPS API ver. 1 registered
[    0.392368] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.392417] PTP clock support registered
[    0.394539] clocksource: Switched to clocksource rps_clocksource_timer
[    0.412835] NET: Registered protocol family 2
[    0.413713] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.413752] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.413788] TCP: Hash tables configured (established 1024 bind 1024)
[    0.413888] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.413928] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.414197] NET: Registered protocol family 1
[    0.414740] RPC: Registered named UNIX socket transport module.
[    0.414760] RPC: Registered udp transport module.
[    0.414771] RPC: Registered tcp transport module.
[    0.414781] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.414842] pci 0000:00:00.0: enabling device (0140 -> 0142)
[    0.414917] PCI: CLS 32 bytes, default 32
[    0.415249] Unpacking initramfs...
[    0.805811] Freeing initrd memory: 3644K (c7a99000 - c7e28000)
[    0.807203] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.807372] Initialise system trusted keyring
[    0.820741] zbud: loaded
[    0.825904] NFS: Registering the id_resolver key type
[    0.825963] Key type id_resolver registered
[    0.825976] Key type id_legacy registered
[    0.826022] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.826045] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.826974] fuse init (API version 7.23)
[    0.828986] Key type big_key registered
[    0.906992] Key type asymmetric registered
[    0.907028] Asymmetric key parser 'x509' registered
[    0.907156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.907182] io scheduler noop registered
[    0.907202] io scheduler deadline registered
[    0.907256] io scheduler cfq registered (default)
[    0.907909] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.909557] console [ttyS0] disabled
[    0.909652] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[    1.495344] console [ttyS0] enabled
[    1.510241] loop: module loaded
[    1.762245] scsi host0: sata_oxnas
[    1.815467] ata1: SATA max UDMA/133 irq 7
[    1.819560] sata_oxnas: resetting SATA core
[    1.820695] nand: Could not find valid ONFI parameter page; aborting
[    1.820736] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[    1.820743] nand: Hynix NAND 128MiB 3,3V 8-bit
[    1.820751] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.820766] Scanning device for bad blocks
[    1.903262] 2 ofpart partitions found on MTD device 41000000.nand
[    1.909329] Creating 2 MTD partitions on "41000000.nand":
[    1.914736] 0x000000000000-0x000000e00000 : "boot"
[    1.921533] 0x000000e00000-0x000008000000 : "data"
[    1.928808] oxnas-gmac 40400000.ethernet: no reset control found
[    1.934848] stmmac - user ID: 0x12, Synopsys ID: 0x35
[    1.939873]  Ring mode enabled
[    1.942929]  DMA HW capability register supported
[    1.947435]  Enhanced/Alternate descriptors
[    1.951787]  Enabled extended descriptors
[    1.955776]  RX Checksum Offload Engine supported (type 2)
[    1.961254]  TX Checksum insertion supported
[    1.965498]  Wake-Up On Lan supported
[    1.969136]  Enable RX Mitigation via HW Watchdog Timer
[    1.990302] libphy: stmmac: probed
[    1.993699] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[    2.000153] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[    2.006824] PPP generic driver version 2.4.2
[    2.011724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.018232] ehci-pci: EHCI PCI platform driver
[    2.023119] oxnas-ehci 40200100.ehci: EHCI Host Controller
[    2.028618] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[    2.036518] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[    2.060011] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[    2.066342] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.073162] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.080381] usb usb1: Product: EHCI Host Controller
[    2.085237] usb usb1: Manufacturer: Linux 4.4.48-oxnas-tld-1 ehci_hcd
[    2.091671] usb usb1: SerialNumber: 40200100.ehci
[    2.097308] hub 1-0:1.0: USB hub found
[    2.101168] hub 1-0:1.0: 2 ports detected
[    2.106193] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    2.111500] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 2
[    2.124418] xhci_hcd 0000:00:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    2.133317] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.140134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.147325] usb usb2: Product: xHCI Host Controller
[    2.152202] usb usb2: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[    2.158612] usb usb2: SerialNumber: 0000:00:00.0
[    2.164213] hub 2-0:1.0: USB hub found
[    2.168033] hub 2-0:1.0: 2 ports detected
[    2.172974] xhci_hcd 0000:00:00.0: xHCI Host Controller
[    2.178201] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 3
[    2.185804] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.194181] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    2.201198] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.208391] usb usb3: Product: xHCI Host Controller
[    2.210152] ata1: SATA link down (SStatus 0 SControl 300)
[    2.218700] usb usb3: Manufacturer: Linux 4.4.48-oxnas-tld-1 xhci-hcd
[    2.225144] usb usb3: SerialNumber: 0000:00:00.0
[    2.230796] hub 3-0:1.0: USB hub found
[    2.234618] hub 3-0:1.0: 2 ports detected
[    2.239728] usbcore: registered new interface driver cdc_acm
[    2.245419] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.253537] usbcore: registered new interface driver cdc_wdm
[    2.259389] usbcore: registered new interface driver usb-storage
[    2.265612] usbcore: registered new interface driver usbserial
[    2.271818] usbcore: registered new interface driver usbserial_generic
[    2.278382] usbserial: USB Serial support registered for generic
[    2.284830] mousedev: PS/2 mouse device common for all mice
[    2.290598] i2c /dev entries driver
[    2.295418] hidraw: raw HID events driver (C) Jiri Kosina
[    2.301342] usbcore: registered new interface driver usbhid
[    2.306887] usbhid: USB HID core driver
[    2.312721] NET: Registered protocol family 10
[    2.330552] sit: IPv6 over IPv4 tunneling driver
[    2.336117] NET: Registered protocol family 17
[    2.341509] Key type dns_resolver registered
[    2.347069] registered taskstats version 1
[    2.351237] Loading compiled-in X.509 certificates
[    2.356213] zswap: loaded using pool lzo/zbud
[    2.376604] Key type encrypted registered
[    2.383938] Freeing unused kernel memory: 228K (c0827000 - c0860000)
[    2.420090] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[    2.527892] udevd[99]: starting version 175
[    2.572108] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.578792] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.633175] usb 1-1: Product: USB2.0 Hub
[    2.670510] hub 1-1:1.0: USB hub found
[    2.690122] hub 1-1:1.0: 4 ports detected
[    3.000069] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci
[    3.121177] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5575
[    3.128028] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.135349] usb 1-1.1: Product: Cruzer Glide
[    3.139601] usb 1-1.1: Manufacturer: SanDisk
[    3.143892] usb 1-1.1: SerialNumber: 4C530201370809103182
[    3.150689] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    3.157455] scsi host1: usb-storage 1-1.1:1.0
[    3.184445] usbcore: registered new interface driver uas
[    4.161912] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.27 PQ: 0 ANSI: 6
[    4.176192] sd 1:0:0:0: [sda] 15330304 512-byte logical blocks: (7.85 GB/7.31 GiB)
[    4.187281] sd 1:0:0:0: [sda] Write Protect is off
[    4.192268] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[    4.193423] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.212085]  sda: sda1
[    4.223283] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   13.868968] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   13.894215] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   15.411499] udevd[300]: starting version 175
[   17.266836] EXT4-fs (sda1): re-mounted. Opts: (null)
[   17.304230] random: nonblocking pool is initialized
[   17.569418] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   20.735810] Adding 1048572k swap on /swapfile1.  Priority:-1 extents:360 across:1169636k FS
[   22.926819] zram: Added device: zram0
[   22.939673] zram: Added device: zram1
[   22.948623] zram: Added device: zram2
[   22.972715] zram: Added device: zram3
[   23.022553] zram0: detected capacity change from 0 to 23220224
[   23.094883] Adding 22672k swap on /dev/zram0.  Priority:10 extents:1 across:22672k SSFS
[   23.107051] zram1: detected capacity change from 0 to 23220224
[   23.167669] Adding 22672k swap on /dev/zram1.  Priority:10 extents:1 across:22672k SSFS
[   23.178672] zram2: detected capacity change from 0 to 23220224
[   23.243128] Adding 22672k swap on /dev/zram2.  Priority:10 extents:1 across:22672k SSFS
[   23.253701] zram3: detected capacity change from 0 to 23220224
[   23.328614] Adding 22672k swap on /dev/zram3.  Priority:10 extents:1 across:22672k SSFS
[   28.700303] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   52.242145] zram: Cannot change disksize for initialized device
[   52.343787] zram: Cannot change disksize for initialized device
[   52.452183] zram: Cannot change disksize for initialized device
[   52.555481] zram: Cannot change disksize for initialized device
[  507.040739] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[  507.065103] usb 3-2: New USB device found, idVendor=0781, idProduct=5581
[  507.071843] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  507.078947] usb 3-2: Product: Ultra
[  507.082483] usb 3-2: Manufacturer: SanDisk
[  507.086807] usb 3-2: SerialNumber: 4C530001320111116341
[  507.101637] usb-storage 3-2:1.0: USB Mass Storage device detected
[  507.120440] scsi host2: usb-storage 3-2:1.0
[  508.140997] scsi 2:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[  508.156935] sd 2:0:0:0: [sdb] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB)
[  508.168212] sd 2:0:0:0: [sdb] Write Protect is off
[  508.173099] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  508.180490] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  508.201103]  sdb: sdb1
[  508.215139] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  583.380247] xhci_hcd 0000:00:00.0: xHCI host not responding to stop endpoint command.
[  583.388052] xhci_hcd 0000:00:00.0: Assuming host is dying, halting host.
[  583.394787] xhci_hcd 0000:00:00.0: HC died; cleaning up
[  583.400729] usb 3-2: USB disconnect, device number 2
[  583.420385] sd 2:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
[  583.428549] sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 00 00 08 00 00 00 08 00
[  583.436129] blk_update_request: I/O error, dev sdb, sector 2048
[  583.442045] Buffer I/O error on dev sdb1, logical block 0, lost sync page write
[  583.457914] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[  592.260303] Buffer I/O error on dev sdb1, logical block 3702784, lost sync page write
[  592.268108] JBD2: Error -5 detected when updating journal superblock for sdb1-8.
[  592.275909] Aborting journal on device sdb1-8.
[  592.280448] Buffer I/O error on dev sdb1, logical block 3702784, lost sync page write
[  592.288245] JBD2: Error -5 detected when updating journal superblock for sdb1-8.
[  597.266296] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[  600.133199] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[  604.556794] EXT4-fs error (device sdb1): ext4_find_entry:1450: inode #2: comm smbd: reading directory lblock 0
[  604.567055] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[  604.583582] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[  604.601100] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[  604.617082] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[  604.650664] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[  604.671342] EXT4-fs error (device sdb1): ext4_find_entry:1450: inode #2: comm smbd: reading directory lblock 0
[  604.681592] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
[  636.548459] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm smbd: error -5 reading directory block
root@DebianPlug:~# lspci
00:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)
root@DebianPlug:~# lsusb
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0781:5575 SanDisk Corp.
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@DebianPlug:~# fdisk -l

Disk /dev/mtdblock0: 14 MiB, 14680064 bytes, 28672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaaaaaaaa

Device           Boot      Start        End    Sectors   Size Id Type
/dev/mtdblock0p1 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p2 ?    2863311530 5726623059 2863311530   1.3T aa unknown
/dev/mtdblock0p3 ?    2863311530 4294989139 1431677610 682.7G aa unknown
/dev/mtdblock0p4 ?    2863311530 5721052499 2857740970   1.3T aa unknown

Disk /dev/mtdblock1: 114 MiB, 119537664 bytes, 233472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 7.3 GiB, 7849115648 bytes, 15330304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01ecce21

Device     Boot Start      End  Sectors  Size Id Type
/dev/sda1        2048 15147007 15144960  7.2G 83 Linux

Disk /dev/zram0: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 22.1 MiB, 23220224 bytes, 5669 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
root@DebianPlug:~# e2label /dev/sdb1
e2label: No such file or directory while trying to open /dev/sdb1
Couldn't find valid filesystem superblock.

So enjoy yours, I'll try mine in Windows in a few days and if it's broke try to get a refund. Cant' say low voltage fried it either because I ran this off Pogoplug power and we've used a new USB stick and an old hard drive.

Actually, having said that it looks like there's widespread problems with XHCI/USB 3.0 and many Linux kernels.

Google'ing or DuckDuckGo'ing gets relevant results:

xHCI host not responding to stop endpoint command.
Assuming host is dying, halting host.
HC died; cleaning up
USB disconnect

=========
-=Cloud 9=-



Edited 2 time(s). Last edit at 03/22/2017 08:17PM by JoeyPogoPlugE02.
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 08:12PM
Joey,

Calm down:) nothing was broken! That looks like a power problem for the USB 3.0 drive.

Unplug your FD or molex connector. Find any USB power hub, 2.0 is fine. Use that for power.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Pogoplug V3 OXNAS - USB 3.0 on mPCIe - Main thread
March 22, 2017 08:16PM
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: