$3.14 raspberry pi zero w

got one at $3.14 last week, but now $5.00, still good deal.

http://www.microcenter.com/product/486575/Zero_W

And, if you wanna physically connect this Rpi 0 W to your router's RJ-45 port, you can get this inexpensive 100Mbps Micro USB 2.0 RJ45 Adapter which uses an ASIX AX8872B USBNet chipset. I had tested a similar one with the same ASIX USBNet chipset on my Seagate Dockstar and was able to sustain an up/down-load @90 Mbps on a 100 Mbps switch. Anyway, I just placed an order for use with my Rpi 0.

habibie Wrote:
-------------------------------------------------------
> And, if you wanna physically connect this Rpi 0 W
> to your router's RJ-45 port, you can get this
> inexpensive
> 100Mbps
> Micro USB 2.0 RJ45 Adapter which uses an
> ASIX AX8872B USBNet chipset. I had tested a
> similar one with the same ASIX USBNet chipset on
> my Seagate Dockstar and was able to sustain an
> up/down-load @90 Mbps on a 100 Mbps switch.
> Anyway, I just placed an order for use with my Rpi
> 0.


thanks , but what I got is zero w, so could use wireless network

asterix Wrote:
-------------------------------------------------------
> thanks , but what I got is zero w, so could use wireless network
>
Yes. I got both and are planning to use this USB/RJ45 dongle on either of them.

habibie Wrote:
-------------------------------------------------------
> asterix Wrote:
> -------------------------------------------------------
> > thanks , but what I got is zero w, so could use
> wireless network
> >
> Yes. I got both and are planning to use this
> USB/RJ45 dongle on either of them.


Did you get google aiy voice kit, just $3.14 also, http://www.microcenter.com/site/content/Google_AIY.aspx?ekw=aiy&rd=1

asterix Wrote:
-------------------------------------------------------
> Did you get google aiy voice kit, just $3.14 also,
> http://www.microcenter.com/site/content/Google_AIY.aspx?ekw=aiy&rd=1
>
No and not yet. Still don't know what I can do with this kit. Does it have a built-in audio DSP chip?

habibie Wrote:
-------------------------------------------------------
> asterix Wrote:
> -------------------------------------------------------
> > Did you get google aiy voice kit, just $3.14
> also,
> >
> http://www.microcenter.com/site/content/Google_AIY.aspx?ekw=aiy&rd=1
> >
> No and not yet. Still don't know what I can do
> with this kit. Does it have a built-in audio DSP
> chip?

didn't open the box yet, need to find time for it. Too cheap, so bought it first :)

asterix Wrote:
-------------------------------------------------------
> habibie Wrote:
> -------------------------------------------------------
> > asterix Wrote:
> >
> -------------------------------------------------------
> > > Did you get google aiy voice kit, just $3.14 also,
> > >
> >
> http://www.microcenter.com/site/content/Google_AIY.aspx?ekw=aiy&rd=1
> > >
> > No and not yet. Still don't know what I can do with this kit. Does it have a built-in audio DSP chip?
>
> didn't open the box yet, need to find time for it. Too cheap, so bought it first :)
>
If it's just simply an audio system sans any audio DSP chip to process the audio data, then I would rather spend less than $1 to get any (7.1 channels) USB audio dongle, i.e. Portable Audio Adapter Black Usb 7.1 Channel Esternal 3D Sound Adattatore Pc Notebook Card Adapters, 2 Colors Good Application Audio Adapter 3D Sound Card 5.1 USB To 3.5mm Mic Headphone Jack Stereo Headset, etc., for use on my Rpi0 and/or Rpi0W to do the same.

For those who bought either an Rpi0 and/or an Rpi0W, you may wanna stock up this Mini USB 2.0 Micro USB OTG Electronic Charger Converter Adapter US 26¢ or (US 28¢ after the sale is over).

installed motioneye os on zero w, just preconfigure wifi, no adpater needs, works fine,but my camera is 5MP, just OK, not so clear

asterix Wrote:
-------------------------------------------------------
> installed motioneye os on zero w, just preconfigure wifi, no adpater needs, works fine,but my camera is 5MP, just OK, not so clear
>
You are talking about this motioneye, ain't u?

habibie Wrote:
-------------------------------------------------------
> asterix Wrote:
> -------------------------------------------------------
> > installed motioneye os on zero w, just
> preconfigure wifi, no adpater needs, works
> fine,but my camera is 5MP, just OK, not so clear
> >
> You are talking about this
> motioneye,
> ain't u?

yes. https://github.com/ccrisan/motioneye/wiki

support devices :　https://github.com/ccrisan/motioneyeos/wiki/Supported-Devices



Edited 1 time(s). Last edit at 04/02/2018 09:20PM by asterix.

habibie Wrote:
-------------------------------------------------------
> And, if you wanna physically connect this Rpi 0 W to your router's RJ-45 port, you can get this inexpensive 100Mbps Micro USB 2.0 RJ45 Adapter which uses an ASIX AX8872B USBNet chipset. I had tested a similar one with the same ASIX USBNet chipset on my Seagate Dockstar and was able to sustain an up/down-load @90 Mbps on a 100 Mbps switch. Anyway, I just placed an order for use with my Rpi 0.
>
Received this item. I just tested this USB/RJ45 adapter on both my Rpi0 and/or Rpi0W and was able to get about 9/8 MBps R/W throughput on Gigabit LAN with my Seagate GoFLEX Home NAS. So far, so good. I used the following to test the R/W performance on either Rpi0 and/or Rpi0W.

Read test:
dd if=<NFS mounted storage>/Filename of=/dev/zero bs=4M count=128 iflag=direct

Write test:
dd of=<NFS mounted storage>/Filename if=/dev/zero bs=4M count=128 oflag=direct

i couldnt find the link..... however, is yours the one with the option to power the unit from a separate 5v power supply?