Make your inexpensive GoFLEX Home/Net SATA HDD cable

I noticed it is sometimes necessary to directly connect a Seagate GoFLEX Home/Net to an eSATA port on a Linux desktop computer for some sort of troubleshooting purposes. Unfortunately for a person like me who lives frugal life with a limited budget, such a SATA cable from Seagate can be a rather expensive one to have. It is for this reason, I started to scour both AliExpress and eBay to buy inexpensive parts (see below) to build my own SATA cable. Below is a list of parts I bought:

1. 22Pin SATA Cable Male to Female cable US $1.24.
2. 40cm 15+7 Pin Power/Data cable US 99₵.
3. SATA 22P 7+15 Pin Male Plug To SATA 22Pin 7+15 Female Jack convertor US 69₵

Item #1 above can be used alone to connect any bare SATA HDD (sans an enclosure) to a Seagate GoFLEX Home/Net and/or a PogoPlug Series 4 (POGO-V4-A3-01) SATA docking port. The attached picture (20180506_112744.png) shows item #1, coupled with item #3, is used to connect a SATA HDD (with an enclosure) to a Seagate GoFLEX Home SATA docking port. If you just wanna connect a bare SATA HDD (sans an enclosure) to a Seagate GoFLEX Home, then all you will need is item #1. For item #3 above, I had to use a utility knife to strip off some of its plastic casing to elongate the male port (see the attached picture - 20180517_000339.png). So, with a limited budget of US $1.68, I now can couple both item #2 and #3 to connect my Seagate GoFLEX Home/NET SATA HDD (with enclosure) to an eSATA port on my Linux desktop computer (I still need to bring out the HDD power port.

I hope this will help others.

Nice DYI cable solution!

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

I've added this to the Wiki thread:

Quote

Under/Over the hood Modding

Pogoplug Pro / V3 Internal SSD Mod
Pogoplug Pro HW mods
USB Wireless Extender (homemade antenna)
Adding 2nd SATA to HP Thin Client T5325 - Mod 1
Adding 2nd SATA to HP Thin Client T5325 - Mod 2
Connect to external SATA drives (or eSATA enclosures) from a Pogoplug V4
Dual Wireless Antenna on Pogo V3
A quiet and movable fan for your desktop case
NSA320 mod for an additional usb port
Pogoplug Pro V3 Dual Antenna for Wifi
Sata DOM hardware mod to Canvio NAS
Pogoplug Network Stack with PiHole: pics, and description
Reset button for Pogoplug V3 (OXNAS)
Pogo V3 Pro internal Dual SD Card (USB 2.0) using mPCIe slot
Make your inexpensive GoFLEX Home/Net SATA HDD cable

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)



Edited 1 time(s). Last edit at 05/17/2018 03:06AM by bodhi.

Bodhi, thank you.