dpf-ax: unsupported dpf - requests

I flahs fw_pearl_custom.bin, and everything is ok.
Thank you.
:)

Thanks for the info.
I will add the signature of your display to the list of supported dpfs.

superelchi

Hi， superelchi
After I flash w_pearl_custom.bin， I test to set backlight.
backlight level status
0 back light off, black
1 back light off, black
2 back light off, black
3 back light off, black
4 back light off, black
5 back light off, black
6 back light on, lowest level
7 back light on, level +1
8 back light on, level +2
9 back light on, level +3
10 back light on, level +4
11 back light on, level +5
12 back light on, level +6
13 back light on, level +7
14 back light on, level +8
15 back light on, level +8
16 back light on, level +8
17 back light on, level +7
18 back light on, level +6
19 back light on, level +5
20 back light on, level +4

I've flashed fw-taobao.bin, better than peal_custom.bin, but backlight set has a few difference.

@Elickson

Please try attached fw.

Do you have a name or a link to seller / manufacturer?

superelchi

It does the job!
Far cool!
Thank you！！！

Taobao link: http://item.taobao.com/item.htm?id=5827115943



Edited 1 time(s). Last edit at 09/24/2013 10:27PM by elickson.

Fine!
So I will add it as taobao_2.

superelchi

DPFMate
My friend give me this, so origin is unknown. It looks exactly as on picture from link above. Manual says "DPFMate user manual". Problem is, after turn on, it only light without any menu. Inside is chip U4 AX206. SPIFlasher says:
Cmd-9f: ID:0xc84014c8
Cmd-ab: ID:0x13131313
Cmd-90: ID:0xc813c813
Flash ID in channel 1 is Apple 25Q80

Box is on picture in attachment. Only thing i can do is flashing. But which firmware? I want use this as lcd4linux app for my VU+ UNO sattelite receiver. For any help i will be thankfull, can send donation (max 8€) thru PayPal. Thanks.
Edit:
Flashing focal_custom.bin give me picture as is on second attachment.



Edited 1 time(s). Last edit at 09/25/2013 03:46AM by mirecek1965.

Hi mirecek1965,

looks like your friend flashed a wrong custom fw. If there is no backup of the original fw - bad luck.
All you could do is: try flashing all available 240 x 320 fws an hope one will work...

superelchi

A second thought:

is there a label / barcode / sticker on the box with a text like "POF16", 21334" or something like this?

superelchi

Many thanks, i have succes on third attempt. I flash "fw_disp_pearl_landscape.bin" and now is worked!

Hi!
I have a cheap Device and I think it was from Clas Ohlson. But the Clas Ohlson version does not work:

Manufacturer: Apple
Size        : 1 MB
Reading 100000 bytes from flash...
Flash written to file 'fulldump_20130927-164953.bin'.

Looking for firmware.............: Found (buildwin, 128x128 px).
Looking for Openwin..............: Found.
Looking for LcdIniTbl............: Found.
Looking for backlight & contrast.: Found, Found.
Looking for known signatures.....: None.

Sorry, no matching dpf found.

There is a sticker on the back:
ITEM NO: 38-4252
P.O.:68413

Hi Josef,

please upload your original fw-dump.

superelchi

here it comes

Thx in advance, Josef

@Josef

Please try attached fw.

superelchi

looks great! ;-)

some issue with the backlight.
setting 1 to 16 works like it should. setting 17 to 21 is like 12 to 16. I'm not sure if I get full brightness.

/Josef

Hmmm...
Can't find anything unusual. Does brightness adjustment work correctly with the original fw?

superelchi

You are right. It is exactly the same with the original FW.
Thx! Now i will try to control the display from my openWRT router!

/Josef

Okay. So nothing I can do.
I will add this dpf als "clas_olson_2" and add a comment about the - partly - broken brightness control.

superelchi

Hello,

I have a DPF here with 320/240 resolution, I tried to retrieve the information
regarding the DPF with identify.py via pythobn.exe. It says :

Looking for firmware...... : not found
This is no known firmware!
Sorry no matching pdf found.

I did make a binary dump, can you please mail me for the bin-file and help me out?

Thanks in advance and with kind regards,
Dovi

Hi Dovi,

looks like this is not an AX206 based DPF.
To be sure, please upload your firmware dump. I will have a look.

superelchi

Hi a full dump of my unnamed keychain dpf. is a 1,5" with 128x128 pixel
Spi programmer says flash is amic 25l080
i Have tried all the known firmware .
Can you help me



Edited 2 time(s). Last edit at 11/09/2013 05:33PM by gioagril.

Hi gioagril,

please try attached fw.

superelchi

Thanks it work ok

Fine!
Commited "acme_7" to svn.

superelchi

Hi! I have a keychain picture frame that i bought on Media Markt in Sweden, it's called COBY DP151 (151BW). And it does not seem to have any matching Firmware.

[sudo] password for maria: 
Detecting & reading dpf flash...
Opening generic SCSI device '/dev/sr1'
Manufacturer: AMIC
Unknown Manufacturer
Got id[3]: 37, 30, 14
Unable to detect flash, just assuming 2MB size
Size        : 2 MB
Reading 200000 bytes from flash...
Flash written to file 'fulldump_20131129-002518.bin'.

Looking for firmware.............: Found (buildwin, 128x128 px).
Looking for Openwin..............: Found.
Looking for LcdIniTbl............: None.
Looking for backlight & contrast.: Found, Found.
Looking for known signatures.....: None.

Sorry, no matching dpf found.

But the following model has a partial signature match: carrefour_bfv151.
This firmware MAY work for your dpf.

I tried fw_carrefour_bfv151.bin but it is very, very dark, graphics almost invisible and it almost seems inversed (dark is light, light is dark). Also, it's rotated 90 degrees counter clockwise (but I find that orientation better).

I tried to attach stock firmware, but even when compressed it's 1.2MB, so I link to it instead if okay?
https://drive.google.com/file/d/0B6pVrbOrXv-GbFo0TngxVVFHRTQ/edit?usp=sharing

@ Maria:

Please try attached fw.

superelchi

@superelchi

Yeahhh! Thanks! Only backlight seems a bit odd... But I don't think the original firmware even let me control backlight (only contrast). :)

What can I do with display now?

maria Wrote:
-------------------------------------------------------

> Yeahhh! Thanks! Only backlight seems a bit odd...
> But I don't think the original firmware even let
> me control backlight (only contrast). :)

"Odd" in what way - brightness not getting brighter on each step / not working at all / ... ?

>
> What can I do with display now?

Have a look here: lcd4linux.

superelchi

It goes up and down, and I do not see any real pattern in it's behavior. Not much difference between steps either. Even at setting 1 it's well lit.

Subjective list:

1:
2: up
3: up
4: up
5: up
6: up
7: same as 6
8: same as 6
9: slightly darker than 1
10: like 1
11: like 2
12: like 11
13: like 11
14: like 11
15: like 11
16: like 11
17: like 9
18: like 11
19: like 11
20: like 11
21: like 11



Edited 1 time(s). Last edit at 11/29/2013 07:10AM by maria.