Welcome! Log In Create A New Profile

Advanced

Sitronix device but script says "Refuse to open device"

Posted by velo 
Sitronix device but script says "Refuse to open device"
May 28, 2014 01:02AM
Can someone please help me figure out what I need to do?

I have the device connected via usb and it is in "Updating" mode.

dmesg says:
[  766.337415] scsi 9:0:0:0: Direct-Access     SITRONIX MULTIMEDIA       0.09 PQ: 0 ANSI: 0 CCS
[  766.338190] sd 9:0:0:0: Attached scsi generic sg1 type 0
[  766.338690] sd 9:0:0:0: [sdb] 4096 512-byte logical blocks: (2.09 MB/2.00 MiB)
[  766.338951] sd 9:0:0:0: [sdb] Write Protect is off
[  766.338958] sd 9:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[  766.339190] sd 9:0:0:0: [sdb] No Caching mode page found
[  766.339196] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[  766.343859] sd 9:0:0:0: [sdb] No Caching mode page found
[  766.343871] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[  766.365006]  sdb: unknown partition table
[  766.366642] sd 9:0:0:0: [sdb] No Caching mode page found
[  766.366649] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[  766.366655] sd 9:0:0:0: [sdb] Attached SCSI removable disk

Running detect:
./detect.py /dev/sg1
Opening generic SCSI device '/dev/sg1'
Not a photo frame. Refuse to open device.
Traceback (most recent call last):
  File "./detect.py", line 98, in <module>
    d = dpf.open(sys.argv[1])
SystemError: Failed to open port:
File open error

lsusb also lists it:
Bus 003 Device 006: ID 1403:0001 Sitronix Digital Photo Frame

Everything else gives the same error. It always says "Not a photo frame" and "Failed to open port"

I feel like I am missing something obvious. Help please?
Re: Sitronix device but script says "Refuse to open device"
May 28, 2014 01:40AM
I also tried it on Windows and got the following:

Running on windows - unable to detect flash size
Reading 100000 bytes from flash...
Failed: DeviceIoControl - Error code: 1306

Would appreciate any hints, please.
Re: Sitronix device but script says "Refuse to open device"
May 23, 2016 05:40PM
Sitronix is st2205 and not dpf ax203 http://forum.doozan.com/read.php?9,2435
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: