LCD screen for your dockstar (cheap! <$5)

...
...
usb 1-1.4: new full speed USB device using orion-ehci and address 41
scsi23 : usb-storage 1-1.4:1.0
scsi 23:0:0:0: CD-ROM            buildwin  Photo Frame     1.01 PQ: 0 ANSI: 2
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 23:0:0:0: Attached scsi CD-ROM sr0
sr 23:0:0:0: Attached scsi generic sg1 type 5
usb 1-1.4: reset full speed USB device using orion-ehci and address 41

Bus 001 Device 041: ID 1908:0102
Bus 001 Device 018: ID 0c76:1607 JMTek, LLC. audio controller
Bus 001 Device 007: ID 5bcd:5bcd
Bus 001 Device 003: ID 0951:161a Kingston Technology
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

root@NEPTUNE:/usr/src/dpf-ax/fw# python detect.py /dev/sg1
Traceback (most recent call last):
  File "detect.py", line 15, in <module>
    import dpf
ImportError: No module named dpf

root@NEPTUNE:/usr/src/dpf-ax/fw# python detect.py /dev/sg1
Opening generic SCSI device '/dev/sg1'
Manufacturer: Apple
Size        : 1 MB

root@NEPTUNE:/usr/src/dpf-ax/fw# python fulldump.py /dev/sg1
Opening generic SCSI device '/dev/sg1'
Manufacturer: Apple
Size        : 1 MB
Reading 100000 bytes...
Wrote full.bin

root@NEPTUNE:/usr/src/dpf-ax# lsusb
Bus 001 Device 043: ID 1908:3318
Bus 001 Device 018: ID 0c76:1607 JMTek, LLC. audio controller
Bus 001 Device 007: ID 5bcd:5bcd
Bus 001 Device 003: ID 0951:161a Kingston Technology
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

root@NEPTUNE:/usr/src/dpf-ax/fw# python restore.py fw_focal_landscape.bin -f
Found AX206 DPF (bootloader)
Error: Failed to claim usb device!
Possibly you have to 'sudo libhid-detach-device 1908:3318'
Traceback (most recent call last):
  File "restore.py", line 23, in <module>
    d = dpf.open("usb0")
SystemError: Failed to open port:
Unknown error

#!/bin/sh
#
# detach-from-hid
#
# Simple HID detach code for AX206 based DPF hardware in bootloader mode
#
# 2012/04/02 superelchi
#   First version   
#
#
if [ `id -u` -ne 0 ]; then
        echo "$0: You must be root to do this.">&2
        exit 1
fi

dirlist=$(find -L /sys/bus/usb/devices -maxdepth 1 -type d)
for d in $dirlist ; do
    if [ -e ${d}/product ] ; then
        grep -q BL206 ${d}/product
        if [ $? -eq 0 ] ; then
            id=${d##*/}:1.0
            if [ -e /sys/bus/usb/drivers/usbhid/${id} ] ; then
                echo -n "Detaching dpf at ${id}..."
                echo -n $id > /sys/bus/usb/drivers/usbhid/unbind
                echo " done."
            else
                echo "$0: info - dpf at ${id} is already detached."
            fi    
            exit 0
        fi
    fi
done            
echo "$0: warning - no dpf in bootloader mode found."

svn co svn://svn.debian.org/libhid/trunk libhid-svn

...
...
#if defined (DPFMODEL_white)
#       define LCD_128x128
#       define LCD_CONTROLLER_ILI9163B
#       define LCD_ORIENTATION_RGB RGB_DOWN
#       define BUTTON_SWAP
#       define DEFAULT_ORIENTATION ROT_UP
...
...

#       define LCD_128x128

#       define LCD_320x240

Linking..
ASlink-Warning-No definition of area BLIT

?ASlink-Warning-Undefined Global '_st77xx_landscape_blit' referenced by module 'main'

?ASlink-Warning-Undefined Global '_st77xx_landscape_blit' referenced by module 'lcd'

?ASlink-Warning-Undefined Global '_st77xx_landscape_blit' referenced by module 'usb_ep1'

?ASlink-Warning-Undefined Global '_st77xx_landscape_blit' referenced by module 'print'
make: *** [main.ihx] Error 9