Welcome! Log In Create A New Profile

Advanced

bload on acme_7 AX206: Resource temporarily unavailable

Posted by gdm85 
bload on acme_7 AX206: Resource temporarily unavailable
December 31, 2016 05:47PM
I managed to flash multiple times an acme_7 AX206 DPF (it's a buildwin tiny 1.5" frame), however no luck at using bload to run firmwares from RAM.

I have also built sdcc 2.9, and then the necessary fw_acme_7.bin. I always get the same error:
sudo ./bload ../tools/fulldump_20161230-204312.bin 
Found AX206 DPF (bootloader)
Writing to USB: Resource temporarily unavailable
Writing to USB: Resource temporarily unavailable
Writing to USB: Resource temporarily unavailable
[...]

Any ideas where to look at? I tried both with usb_interrupt_write and usb_bulk_write in rawusb.c, same result. I have read this could be due to the cable, but even when flashing is fine? It seems more like a software/firmware problem to me.

Thanks
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: