Perfect! $ uname -a Linux trunks 5.2.9-mvebu-tld-1 #1 SMP PREEMPT Mon Aug 19 12:47:39 PDT 2019 armv7l GNU/Linux Thank you fsonnleiby fsonnlei - Debian
Hi Bodhi. Sorry for the delay (busy week) and for the confusion regarding stock vs mainline kernel. My box is WRT1200AC v1. Testing the new dtb: Hit any key to stop autoboot: 0 Marvell>> setenv mtdparts mtdparts=pxa3xx_nand-0:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfgby fsonnlei - Debian
Well, as described here: https://forum.doozan.com/read.php?2,87709,87844#msg-87844, if I use "my.dtb" file I can access the RTC, mtd partitions and full ram. If i use armada-385-linksys-caiman.dtb, I can't access the RTC. When I said stock linux and dtb, I mean kernel downloaded from kernel.org Hope it helps. fsonnleiby fsonnlei - Debian
Hi Bodhi. Regarding the different DTB file, please see my previous post. Following is the log for booting with your kernel 5.1.7 and the DTB included (not "my.dtb"). Marvell>> setenv mtdparts 'mtdparts=pxa3xx_nand-0:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(sysby fsonnlei - Debian
Hi Bodhi. Thanks for look at this. Here you go: Marvell>> setenv mtdparts 'mtdparts=pxa3xx_nand-0:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg)' Marvell>> run debian BOOTP broadcast 1 DHCP client bound to address 192.168.1.112 Using egiga0 device TFTP froby fsonnlei - Debian
Yes, your kernel is working ok, thank you. So far the mtd definition and access to leds (/sys/class/leds) needs some adjustments. Best fsonnleiby fsonnlei - Debian
Hi all. Your questions pointed me in the right, I think, direction. I started from scratch, just using Bodhi's linux-5.1.7-mvebu and stock kernel 5.1.7 (kernel.org). uboot: U-Boot 2013.01 (Mar 27 2015 - 16:55:31) Marvell version: 2014_T3.0p6 Boot version : v2.0.13 Board: RD-NAS-88F6820-DDR3 SoC: MV88F6820 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Reby fsonnlei - Debian
Thanks. Attached files: - fw_printenv from Debian Bodhi - dmesg from Debian Bodhi - dmesg from OpenWRT Best, fsonnleiby fsonnlei - Debian
Hi all. Recently I installed Debian mvebu on my wrt1200ac. Using dts from https://github.com/Chadster766/McDebian/tree/master/linux-4.19.12/arch/arm/boot/dts and kernel / rootfs 5.1.7 from bodhi (thanks!), I successfully booted and ran the OS. Almost everything works: ethernet switch, wifi (mwlwifi compiled as module), cpu speed, etc. However the kernel reports less memory than other OSs:by fsonnlei - Debian
@gp ???? Select the modules via menuconfig, compile the kernel, install the kernel...by fsonnlei - Debian
Just in case, I swapped the internal card for an Atheros AR9285 and it's working great!by fsonnlei - Debian
@gp I just compiled kref's linux-oxnas using Bodhid's .config as base. I added usb audio and a few usb wireless modules. However I can't use the internal (RT3090) card. With Bodhi's .config it couldn't do a scan (iwconfig just gave me no wireless extensions). With my .config (based on bodhi's using kernel 3.12.13) it was able to be recognized by iwconfig. Howeveby fsonnlei - Debian