well i have something like this on machine env ethaddr=B0:B2:DC:F2:F4:B5 and i use ext3 partition rootfs I changed fw_setenv usb_rootfstype 'ext3' warning disapear still persist on boot [ 0.161017] : /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.166529] No ATAGs? i have no explanation but my nas is running weby sz3bbylA - Debian
Yesterday i saw on my nsa320 this message on boot : /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set and EXT2-fs (sdb1): warning: mounting ext3 filesystem as ext2 I have Linux version 4.1.0-kirkwood-tld-1 (root@tldDebian) U-Boot 2014.07-tld-3 is there a problem with my u-boot settings ??? fw_printenv arcNumber=3956 baudrate=115200 boot_satby sz3bbylA - Debian
i have zyxel nsa320 1.2 GB armv5, 512 RAM i try to open this subject because need more ram on my device from now i have samba proftpd apache mysql postfix dovecot clamav (amavis new) spamassasin and more ... , but .... 30 mega free ram my toy is very stable and don't want to change maiby someone know some trick to replace ram chip from main board width more than 512 thanks for helpby sz3bbylA - Debian
ZyXel nsa320 segate baracuda 7200. 1TB nas compatible on boot i have this message Write cache: enabled, read cache: enabled, doesn't support DPO or FUAby sz3bbylA - Debian
my configuration is U-Boot 2011.12 (May 03 2012 - 17:04:23) ZyXEL NSA320 2-Bay Power Media Server and have Debian-3.16.0-kirkwood-tld-2-rootfs-bodhi.tar.bz2 (02 Sept 2014) i d't know which arcNumber must use and machid (if is need) on printenv i have arcNumber=4022 baudrate=115200 boot_sata1=mw 0x800000 0 1; setenv bootargs console=ttyS0,115200 root=/dev/sda1 rootdelay=10by sz3bbylA - Debian
just i can't see freq processor and serial number is Hardware : ZyXEL NSA320 2-Bay Power Media Server Revision : 0000 Serial : 0000000000000000 mayby is not a big problem if processor work new problem found maybe is not but .... i d't know if is all right to put the system on usb, or put on hdd sata inside zyxel problem is because i have a usb hdd this usb hdd start andby sz3bbylA - Debian
I have a nsa320 zyxel i found in my zyxel ver 1.21 and write uboot width kwboot tool after write the system Debian-3.16.0-kirkwood-tld-2-rootfs-bodhi.tar.bz2 on my hdd all is right but after some research found this on my system cat /proc/cpuinfo processor : 0 model name : Feroceon 88FR131 rev 1 (v5l) Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPUby sz3bbylA - Debian