Dear bodhi, The network does not appear: root@ZoliConnect:/home/zoli# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:d0:b8:0c:d3:cd UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TXby tanya - Debian
Dear bodhi, It seems to me that the network is still down. I made it without attaching LAN. The output is from serial: Debian GNU/Linux 8 ZoliConnect ttyS0 ZoliConnect login: zoli Password: Last login: Wed Sep 16 09:53:22 CEST 2015 on ttyS0 Linux ZoliConnect 4.2.0-kirkwood-tld-1 #1 PREEMPT Mon Aug 31 23:12:00 PDT 2015 armv5tel The programs included with the Debian GNU/Linux systemby tanya - Debian
Dear bodh, The card is "Intel® Centrino® Advanced-N + WiMAX 6250". The "lsmod | grep -i iwlwifi" command output is empty. The lsmod command output is the following : # lsmod Module Size Used by cfg80211 396985 0 rfkill 15823 1 cfg80211 evdev 9408 0 marvell_cesa 24785 0 des_generby tanya - Debian
Dear bodhi, I just installed your 4.2 kernel, but the wifi card still does not appear. Can you suggest something to try? tanyaby tanya - Debian
@bodhi The card is "Intel Centrino Advanced-N + WiMAX 6250".by tanya - Debian
@bodhi dmesg outputs attached. Hope you find the root cause.by tanya - Debian
Dear bodhi, My Ralink card is correctly recognised with lspci command. Atheros not. Today I tried an Intel 6250 card. It was not recognised either (lspci). Can it be uboot-related? My u-boot version is: U-Boot 2014.07-tld-2. Checcking again of your uboot flash instructions I found a possible reason. May be my uboot is somehow bad: dmesg | grep -i 'bad' [ 1.806961] Scanninby tanya - Debian
Dear Bodhi, Here I attach the boot log (via serial port) for both wireless card. May be you can suggest something to enable Atheros support.. (Ralink works as expected).by tanya - Debian
root@debian:~# lspci -vv 00:01.0 PCI bridge: Marvell Technology Group Ltd. 88F6281 ARM SoC (rev 02) (prog-if 00 ) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Bus: primary=00, secondary=01, subordiby tanya - Debian
Dear bodhi, I replaced the wireless card in the iConnect for Atheros 9287. However the kernel does not seem to recognise it. The card works well under Windows if I put in my notebook. Please help me enable the card if you can. Here is my dmesg output: root@debian:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Inby tanya - Debian