Thank you for that last link, Dieter. In it I found the source of my problem. I didn't use netcat or netconsole, as I've been interacting with the Dockstar boot via the internal serial port. As in your link above, uImage and uInitrd were not being loaded on the USB drive for some odd reason. Bodhi: Many thanks as well. I used your rootfs image and it booted right up. I diby Ack210 - Debian
No luck. Squeeze installs, but on reboot I'm right back to the pogoplug software. I'm at a loss.by Ack210 - Debian
Thanks for the advice. As you probably have guessed, I'm a relative noob to this. I did not do the moves on my initial install, since I had never attempted a Debian install before on this device and therefore, they should't exist. (I checked, they didn't) I have done that since but still received the same error. After I changed head to tail, I got past the --no-check-gpg eby Ack210 - Debian
I am having the exact same problem with a new install on a recently reclaimed Dockstar and a new USB stick (1 Gig). I do not have anything in /tmp/debootstrap and my USB is formatted roughly 512M bootable Linux (83) and 512M Linux Swap (82). The current uboot is installed. Any help would be appreciated. Here's a dump of my console: Pogoplug:~$ cd /tmp <projects.doozan.com/deby Ack210 - Debian