I found wat was the problem: Wrong environment settings in uBoot, I had non standart sesstions on old hardrive. Could you add somewhre in FAQ that if you have set in env settings, rootfs load by label, it wont work on GPT.by andsol - Debian
@bodhi, one more question, Im trying to setup rootfs on new 3TB disk. I use GPT, it looks like uBoot cant recognize it. Is that true? I get this: U-Boot 2015.10-tld-1 (Nov 06 2015 - 16:09:38 -0800) ZyXEL NSA325 2-Bay Power Media Server SoC: Kirkwood 88F6282_A1 DRAM: 512 MiB (ECC not enabled) WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Nby andsol - Debian
@bodhi, Hello. Thank you, that you did a test for me. Here it is: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Mon Aug 31 2by andsol - Debian
Thanks bodhi. Let me know please.by andsol - Debian
Check if you see session id files in temp folder, phpmyadmin and wordpress can store session id DB.by andsol - Debian
Gyus any adeas where to dig? I have latest uBoot and latest linux-4.2.0-kirkwood-tld-1-bodhi kernel. I had all versions of kernels and uBoots it was slow on all of them. Two hard drive inside ext4 file copy from one to another 8 MB/s, during copy 100% cpu load. I remember when I had stock firmare and OS it was aprox 60 MB/s. root@nas:~# hdparm -tT /dev/sdb /dev/sdb: Timing cachedby andsol - Debian
What was changed from previous version ?by andsol - uBoot
Guys, how may I switch off or dim leds on the front? Is this possible?by andsol - Debian
I've tried this: # cat /sys/block/sda/queue/scheduler noop deadline # echo deadline > /sys/block/sda/queue/scheduler # cat /sys/block/sda/queue/scheduler noop cfq Slighly better instead of 100% its shows me 85-90%. Here is my tests: root@nas:~# hdparm -Tt /dev/sda /dev/sda: Timing cached reads: 556 MB in 2.00 seconds = 277.38 MB/sec Timing buffered disk reads: 262by andsol - Debian
@ziggy, I gonna send you 3.18.5 boot folder later. I have to go now ).by andsol - Debian
@bodhi, did you had a chance to check file copy perfomance issue?by andsol - Debian
ziggy Wrote: ------------------------------------------------------- > Hi andsol > > The boot folder you gave is not 3.18.5 but 4.1 > Are you sure you've upload te correct boot > folder? > > If you want can you make a boot folder with kernel > 3.18.5 for NSA325v2 with uboot 2014.7-tld-4 > installed in NAND. > For quick testing I now boot from USB stby andsol - Debian
ziggy Wrote: > > Would it be possible to make the uImage for 3.18.5 > rootfs with NSA325 dtb appended like bodhi > stated? > Then I can upgrade further with the steps on the > forum, so I can learn how to upgrade the system > for future purpose. I think, your problem in something else. 3.18.5 it's my emergency point. When you have it set on USB and there is noby andsol - Debian
ziggy Wrote: ------------------------------------------------------- > Can you please generate for me the correct > uImage? > With the wheezy virtual machine it also doesn't > work > Ziggy, as I said earlier, Debian-3.18.5-kirkwood-tld-1-rootfs-bodhi.tar.bz2 should work for you. Its my initital image where im starting from. Which debian release you need? Checkby andsol - Debian
@Ziggy, 3.18.5 image should work fine for you. Let me know if you need properly generated kernel files I can send them to you. --------------------- Moderator EDIT: I've split this topic to this new thread so it will not clutter the main kernel/rootfs thread.by andsol - Debian
davidedg Wrote: ------------------------------------------------------- > andsol Wrote: > -------------------------------------------------- > ----- > > > Cpu on 100% constantly > > Is this normal behaviuor? > > I don't have a 2nd disk handy, but just tried from > disk to same disk, large file and cpu is at 70% > (25MB/sec) > So I guess itby andsol - Debian
Guys, I just set second hard drive in my NSA325v2 and i see that it perform bad during file copy. When i do copy from one internal drive to another (large files). Total DISK READ : 47.21 M/s | Total DISK WRITE : 47.26 M/s Actual DISK READ: 46.84 M/s | Actual DISK WRITE: 55.85 M/s Cpu on 100% constantly, Im on latest uBoot and kernel. Is this normal behaviuor? Thanks.by andsol - Debian
Updated With u-boot 2014.07-tld-4 and linux-4.1.0-kirkwood-tld-2-bodhi.tar.bz2 on my NSA325 v2 Everything works, I haven't check network issue (is this fixed or no). Thank you all!!!by andsol - Debian
Guys, help me please to boot from SATA (USB works fine) Here is my env: mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) baudrate=115200 bootcmd_sata=run sata_init; run set_bootargs_sata; run sata_boot; bootcmd_usb=run usb_init; run set_bootargs_usb; run usb_boot; bootdelay=10 console=ttyS0,115200 device=0:1 ethact=egiga0 if_netconsole=ping $serverip led_errorby andsol - uBoot
@bodhi 1. I've change it to fw_setenv usb_root 'LABEL=rootfs' it works now 2. I use ubuntu as a server, in command line: nc -l -p 6666 192.168.0.10 When i do following on NAS: cat test.txt | nc 192.168.0.10 6666 I receive message from the file. But during booting, terminal empty. Any way its not a critical to me to have a network console. I will order proper caby andsol - uBoot
@bodhi It works. The problem was with cables. Could you add somewhere in faq about my mistakes? 1. Do not use cables based on: PL2303TA, PL2303RA chipsets. 2. I have used two partitions (boot ext2, rootfs ex3). Which is wrong. I can login to SSH via LAN. So its not a brick anymore :) thank you bodhi for help. PS 1. When I insert HDD1 system does not start. SYS is green, but no pinby andsol - uBoot
@bodhi 1. Lo luck with UART connection, just messy symbols. I have two cables based on two different ships, but from same company :) : One is on PL2303TA, and the second one PL2303RA. http://www.prolific.com.tw/US/ShowProduct.aspx?pcid=41&showlevel=0041-0041 Could you tell me which cable are you using? I will try to buy your one... 2. NSA325 is not pinging and I see on DHCP thatby andsol - uBoot
@bodhi No luck, I bought another cable. Same results. 1. TX RX set right. I use Windows and VMware Debian image inside. Picocom connection (Current: 115200 8N1, Terminal emulation : VT102 or ANSI). Shows this: �/5'���y���k���75-95�==-'=;'5��mUj�=�UY{����렕�}����UV������������9|##-#1- �/5'by andsol - uBoot
@bodhi Unfortunately my nsa325v2 became a brick (((. It reboots constantly. When press on power: HDD1 light blink with green and then SYS green, 30 secs it repeats. I bought serial cable and terminal shows me this: ▒_!5e57-=▒Y5▒▒▒Y!y▒▒▒▒i-▒▒▒s▒▒▒▒A▒▒▒▒w[}e▒▒▒▒▒▒▒e-{▒▒T_▒▒k▒-▒y=9/5▒#!▒5#=;'57▒▒▒▒▒-by andsol - uBoot