Hi, grayman4hire - Thanks for the info, I'll take a look and study your post! It looks very interesting! Kind regards, Gregg G.by gregg_a_g - Debian
Hey, Bodhi- I've been studying this a little more - I want to make sure I am on the right path before "wiping out" anything. 1) Currently for the V3, MTD setup is: dev: size erasesize name mtd0: 00e00000 00020000 "boot" 14M mtd1: 07200000 00020000 "data" 114M 2) mtd0 is "spl stage 1" + "u-boot" + &quby gregg_a_g - Debian
Hi, Bodhi- The u-boot, Debian path for Oxnas V3 you have devised works great - but there are some parts that are a little bit intricate and I'm not sure I quite follow the details. I am able to boot with SATA no problem (since as you said in another post, the ROM on Pogoplug Pro V3 looks for SATA before anything else). I am also able to boot with USB stick. If I boot withouby gregg_a_g - Debian
Hi, Bodhi - Thanks very much for creating a new 4.0 kernel with cp437. It works like a champ and my VFAT partition mounted at boot! Kind regards, Gregg G.by gregg_a_g - Debian
Cool, Bodhi - I have plenty to keep me busy! I ordered parts for the serial cable connection on e-Bay... Kind regards, Gregg G.by gregg_a_g - Debian
Ah, it just occured to me that I need to: depmod -a (no?) Now I do the following: cd / modprobe -v nls_cp437 insmod /lib/modules/4.0.0-oxnas-tld-1/kernel/fs/nls/nls_cp437.ko modprobe: ERROR: could not insert 'nls_cp437': Exec format error So I think I'm getting a little farther! I also tried --force (evidently to skip module version and magic number cheby gregg_a_g - Debian
Hi, Bodhi - As "root" I made the directory /lib/modules/4.0.0-oxnas-tld-1/kernel/fs/nls, copied the tar file and extracted nls_cp437.ko to the directory. Then I did: modprobe -v ./nls_cp437.ko output was: builtin ./nls_cp437.ko (as if the module was builtin to the kernel)! lsmod output is: Module Size Used by uas 11930 0by gregg_a_g - Debian
Thanks, Bodhi! Perhaps I was fortunate, but the wifi was no trouble with a "fresh install" per your Page 1 directions. Here is my /etc/network/interfaces: ****************************************** auto lo eth0 iface lo inet loopback iface eth0 inet dhcp # auto wlan0 iface wlan0 inet dhcp wpa-ssid "mywifi" wpa-psk "mywifipassword" (don't wby gregg_a_g - Debian
Hi, Bodhi - Thanks so much for your work on Pogoplugs! I got a BIZ02 from Adorama about a week ago and it turned out to be what I think is a P01. It's definitely a V3 Oxnas with WiFi. I upgraded the U-Boot and installed 4.0 kernel per your instructions. I think I somewhat honked up the original firmware (had to direct connect SATA drive to get it sorted) - maybe I'll look into thatby gregg_a_g - Debian