No error during format to ext3. Chaning machid to dd6 still no boot of the kernel.by wzecke - Debian
Here the try with 3.16. Still no scuess: Creation of the usb-stick oot@t20:/tmp# mkfs.ext3 /dev/sdc1 mke2fs 1.42.12 (29-Aug-2014) /dev/sdc1 hat ein ext3-Dateisystem auf Sun Jan 24 15:18:06 2016 erzeugtTrotzdem fortfahren? (j,n) j Ein Dateisystems mit 1220860 (4k) Blöcken und 305216 Inodes wird erzeugt. UUID des Dateisystems: 2e1e318a-528a-4fa4-8194-0ed1ad96680e Superblock-Sicheruby wzecke - Debian
Attach the log. Still no progress. I tried in the meantime another usb stick and and ua sb hard disk as well. In addtion I tried all USB ports. Or is this not a Pogoplug E02? It attached the cpuinfo.by wzecke - Debian
Kernel complains that machid 0x831 is not supported. Changing to 0xffffffff still does not boot.by wzecke - Debian
Still the same problem as before. Kernel does not boot.by wzecke - Debian
Sorry for late reply. I am still stucked at the same point. The kernel is not booting. I used the poge02 dts. Any further ideas?by wzecke - Debian
Thanks for the reply. I did now the above steps on an utbuntu 14.04 x86 system using kirkwood-pogo_e02.dtb. Still the same problem as above. It does not boot from usb. Any further idea, may be my environment is buggy?by wzecke - Debian
Hello, my kernel does not boot. See boot log and the enviorment. Via boot/uEnv.txt is set the machid to ffffffff any suggestion what to do?f Regards,by wzecke - Debian