The UART boot works for NSA310by sodd - uBoot
No problem, I'm patient :)by sodd - Debian
Hi Bodhi, i would like to try install docker on my NSA310, but when i checked dependences for than I stuck with missing CONFIG_MEMCG in your kernel 4.6. So my question is... Is it possible to include this module to your next kernel release? Thx for you work !by sodd - Debian
Ok, thx again bodhi. I tried a lot of MAC but none worked. But then i try 00:00:00:00:00:30 and it works!by sodd - uBoot
i though those NSA 310 have some network issue and they can't be start up by WOL? I tried use WOL but without success :(by sodd - uBoot
Hi, is there any "black magic" which i can do to automatically turn on my NSA 310 after power blackout? Thx for any adviceby sodd - uBoot
Yep, it works ! I dont understand how it can work before without propre set uInitrd in bootcmd... Many thx bodhi you save my day and probably my marriage :Dby sodd - Debian
it's mess i know... but it works for 3.6.9 kernel bootdelay=2 baudrate=115200 loads_echo=0 eth1addr=00:19:CB:00:51:82 rootpath=/mnt/ARM_FS/ netmask=255.255.255.0 nandEcc=1bit MODEL_ID=A203 PRODUCT_NAME=NSA-310 FEATURE_BIT=00 CONTRY_TYPE=FF VENDOR_NAME=ZyXEL Communications Corp. run_diag=yes ethaddr=CC:5D:4E:CA:01:39 console=100000 =ttyS0,115200 mtdparts=nand_mtd:0xc0000@0by sodd - Debian
Is there any change to get working debian jessie on NSA310? I've tested the Debian-3.18.5-kirkwood-tld-1-rootfs-bodhi.tar.bz2 with dtb/kirkwood-nsa310.dtb but without success :( here is my boot log http://pastebin.com/xZ62YkQeby sodd - Debian