You were right for another time bodhi. The installation of OMV was the problem. I installed from the scratch and my problem was solved Thx again for your support...by cratsil1979 - Debian
My boot env variables, with original MAC (4c:9e:ff:XX:XX:XX) inside \NSA325> printenv arcNumber=4495 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; thby cratsil1979 - Debian
Thanx renojim. After your suggestion i had a successfull installation with OMV 5. Now I face another problem. The tranfer rate over my new OMV box is very limited (about 10MB/s). The original stock had much more (70-80MB/s) I suspect the ethernet card of my NSA325v2. It has the default MAC (52:3b:20:9c:11:51) that included in uboot.2016.05-tld-1.environment.img My real MAC adress is 4c:9e:by cratsil1979 - Debian
Thx. Everything now flow smoothly... I'm in progress to install openemiadiavault on Debian 10. I found exactrly the steps that needed from OMV 5 but it reterns root@debian:~# wget -O "/etc/apt/trusted.gpg.d/openmediavault-archive-keyring.asc" https://packages.openmediavault.org/public/archive.key --2021-10-13 23:09:40-- https://packages.openmediavault.org/public/archby cratsil1979 - Debian
Thx for your replay. My new boot status U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:48:40 -0700) ZyXEL NSA325 2-Bay Power Media Server SoC: Kirkwood 88F6282_A1 DRAM: 512 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 MV88E1318 PHY initialized on egiga0 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.0by cratsil1979 - Debian
Hello. I have a NSA325 v2 and i managed to write to NAND , with Uboot 2016.05-tld-1. I made an USB ext3 with name rootfs. i downloaded Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2 and just extracted as root in rootfs. I skipped step 3 (optional) and step 4 with uImage (because i use Uboot after 2012). Tried cold Boot as the forum suggest. After some failed experiment, finally came bacby cratsil1979 - Debian
everything goes ok Now i have updated with ubout 2016 and i have run debian 4.4.0 Also i managed to install omv 3.0.86 But.... when i insert sata hdd the boot proccess stop What is going wrong?by cratsil1979 - Debian
I don't have any mtd0 backup file to write back to NAND. Can i download it?by cratsil1979 - Debian
Can I go from uboot 2014.07 to stock uboot 1.1.4?by cratsil1979 - Debian
Can I go from uboot 2014.07 to stock uboot 1.1.4?by cratsil1979 - Debian
Hello. I've installed with succesfull the uboot 2014.07-tld-4 on my NSA325. I try to boot from usb (debian-3.16-Kirkwood) but after while, it shut down (see and the end exactly what is the point). What's going on? Is it a uboot issue or rootfs issue? Please help me. What can i do....? U-Boot 2014.07-tld-4 (Aug 02 2015 - 00:40:12) ZyXEL NSA325 2-Bay Power Media Server SoC: Kby cratsil1979 - Debian
Please upload again the Automated Debian Installer for Zyxel nsa310, 320 and 325 with omv preinstalled. Thx in advance..!!!by cratsil1979 - Debian