After update the uboot U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:45:22 -0700) Netgear-MS2110 SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 Error: egiga0 address not set. PHY reset timed out 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 starting USB... USB0: USB Eby freestyle - Debian
Hello, this is the result root@debian:~# cat /proc/cmdline console=ttyS0,115200 mtdparts=orion_nand:0xc0000@0(uboot)ro,0xff00000@0x100000(root) root=LABEL=rootfs rootdelay=10 root@debian:~# cat /proc/mtd dev: size erasesize name mtd0: 000c0000 00020000 "uboot" mtd1: 0ff00000 00020000 "root" root@debian:~#by freestyle - Debian
Trying to install U-boot.. root@debian:/tmp# ./flash_erase /dev/mtd0 0 4 flash_erase: error!: /dev/mtd0 error 13 (Permission denied) i'dont erase de mtd0by freestyle - Debian
Ok, i write this setenv and save env, now i try to update U-boot root@debian:~# cat /etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd0 0xc0000 0x20000 0x20000 root@debian:~# cat /proc/mtd dev: size erasesize name mtd0: 000c0000 00020000 "uboot" mtd1: 0ff00000 00020000 "root" are tby freestyle - Debian
Thank you for de answer, this is the result Debian GNU/Linux 8 debian ttyS0 debian login: root Password: Last login: Mon Aug 1 06:15:54 PDT 2016 on ttyS0 Linux debian 4.4.0-kirkwood-tld-1 #1 PREEMPT Mon Jan 25 20:35:24 PST 2016 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the indby freestyle - Debian
Yes, there are errors Debian GNU/Linux 8 debian ttyS0 debian login: root Password: Last login: Sun Jul 31 16:15:43 PDT 2016 on ttyS0 Linux debian 4.4.0-kirkwood-tld-1 #1 PREEMPT Mon Jan 25 20:35:24 PST 2016 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/by freestyle - Debian
Congratulations!!, now boot correctly! __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_by freestyle - Debian
A new attempt __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/by freestyle - Debian
Thanks for the answer. Prepare the usb in linux box # mkfs.ext3 -L rootfs /dev/sdb1 # cd /media/usb # tar -xjf ../../Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 # nano etc/fstab -> change ext2 by ext3 and save # cd boot # cp -a zImage-4.4.0-kirkwood-tld-1 zImage.fdt # cat dts/kirkwood-netgear_stora_ms2000.dtb >> zImage.fdt # mv uImage uImage.orig # mkimage -Aby freestyle - Debian
I interrup the normal boot and write this command QuoteCommand interactive mode setenv bootargs $(console) root=/dev/sda1 rootdelay=8 usb reset ext2load usb 0 0x200000 /boot/uImage ext2load usb 0 0x800000 /boot/uInitrd bootm 0x200000 0x800000 QuoteKernel Panic [ 2.490200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.497058] usb usb1: New USB device strings:by freestyle - Debian
Hello, I have a Netgear Stora and i try to run Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 what is the u-boot env vars to the version "U-Boot 1.1.4 (Jul 31 2009 - 10:33:00) Marvell version: 3.4.14" for run USB rootfs? Thankzby freestyle - Debian