Thank you, Wolfgang and Jeff! You save my time. I followed the guide on http://www.rudiswiki.de/wiki/DockStarDebian and have duplicated my workable USB drive.by Paul - Debian
"...you can disable your nand partition by mounting it as above and then renaming /tmp/ubifs/boot/uImage to something else"... After disabling the nand partition, both Rescue System and USB booting work correctly. It's enough to satisfy my work. Thank you again, Jeff! By the way, can we duplicate the bootable USB drive (including ALL application files in it)?by Paul - Debian
Hi, Jeff, The Dockstar works now. I appreciate you help.by Paul - Debian
Got errors: rescue:/# ubiattach /dev/ubi_ctrl -m 3 libubi: error!: cannot open "/dev/ubi_ctrl" error! 2 (No such file or directory) ubiattach: error!: cannot attach mtd3 error 2 (No such file or directory)by Paul - Debian
If attach a USB drive that has Debian installed before, the Dockstar still doesn't work. The netconsole log is: Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Loading file "/rescueme" from usb device 0:1 (by Paul - Debian
"It sounds like your Dockstar may be getting hung up while attempting to boot from your nand installation. If that's the case, you can force it to boot the rescue system by creating an empty file named 'rescueme' on the root of your ext2 formatted USB drive. ....." Hi, Jeff, You are right! The Dockstar booted successfully from Rescue System with the USB drive attachedby Paul - Debian
Hi, Jeff, 1. How to do "With netconsole, you tell the Dockstar what IP address to use..."? At PC side? 2. where to apply these below commands ( I mean how I can apply these commands to Dockstar because SSH doesn't work) fw_setenv serverip 192.168.1.2 fw_setenv ipaddr 192.168.1.100 fw_setenv if_netconsole 'ping $serverip' ......by Paul - Debian
Thanks, Jeff. I don't know if my Dockstar is okay to use IP address.However, the Dockstar's IP is not showed on my routewr and my PC's IP address is displayed on my router. Meanwhile, I can not access the Dockstar with Putty. Can I get the netconsole log in this situation?by Paul - Debian
My Dockstar has both Rescue System and readonly emdebian on NAND installed. Both systems worked well before. Also I used rescue system to build a couple of USB flash (4GB) Debian Lenny system, because I need large space to run Asterisk. Today, I used Rescue system to build another Debian Lenny on flash drive. After complete installation, I typed “Y” to restart the Docksatr. However, It stuckby Paul - Debian