bodhi, bodhi Wrote: ------------------------------------------------------- > What you must have looked at was the rootfs ins > tallation instruction. In rootfs installation > instruction it also said you should skip the step > about appending DTB if running new u-boot: > > <snip> Yes, I misread the instructions - my mistake. > Something in your rootfsby multiplex'd - Debian
bodhi, I have just updated the kernel image on my Pogo Pro to 4.4.79-oxnas-tld-1 and it fails to boot. After attaching a serial port to the device I see that it hangs after showing the following text: U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plby multiplex'd - Debian
bodhi, In both the test cases the network came up correctly with no problems; I have been unable to reproduce the issue where the network does not come up correctly.by multiplex'd - Debian
multiplex'd Wrote: ------------------------------------------------------- > Okay, I'll try to reproduce the problem when I get > the time; I'm a little busy for the next few days. Unfortunately I've been unable to reproduce the issue I mentioned in my earlier post. I've tried with the cable unplugged and the cable plugged but the switch powered off, so I'by multiplex'd - Debian
Okay, I'll try to reproduce the problem when I get the time; I'm a little busy for the next few days.by multiplex'd - Debian
I'm using a Gbits switch. The cable between the box and the switch was connected the entire time, except that the switch wasn't powered on to begin with. I don't know if that makes any difference; you just unplugged the cable entirely instead of having two cabled devices with one powered down.by multiplex'd - Debian
Hello all, I'm using bodhi's 4.4.54 kernel on a Pogo Pro and I recently got this kernel oops in my logs: Jun 8 00:17:13 gemstone kernel: ------------[ cut here ]------------ Jun 8 00:17:13 gemstone kernel: WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:306 dev_watchdog+0x238/0x25c() Jun 8 00:17:13 gemstone kernel: NETDEV WATCHDOG: eth0 (oxnas-gmac): transmit queue 0 timeby multiplex'd - Debian
Update to my earlier post: Kernel version 4.1.34 has been released, and that seems to work with bodhi's 4.1.0 patch as well: user@pogoplug:~$ uname -r 4.1.34-oxnas-tld-1by multiplex'd - Debian
bodhi Wrote: ------------------------------------------------------- > Not atm. Since there is some developer actively trying to mainline thix box, I am waiting to see > if that effort is successful before renewing this subject. It's good to hear that there may be that possibility. In the mean time though I have discovered that the patch for kernel version 4.1.0 provided in bodhiby multiplex'd - Debian