Duh! Like I said. . . stupid Hunted all over for it, If it was a snake, it would have . . .by radiodude - Debian
USB drive was plugged in; will install rootfs on a different one This is gonna sound really stoopid, but how do I use code tags? /stoopid Moderator edit: please use code tags. It is very hard to read without.by radiodude - Debian
Here's the console log: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices.by radiodude - Debian
Here's the u-boot envs again if needed: u-boot>> printenv arcNumber=2097 baudrate=115200 bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset bootdelay=3 console=ttyS0,115200 ethact=egiga0 ethaddr=00:25:31:00:8B:30 force_rescue=0 force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load uby radiodude - Debian
Hi, bodhi Pogo power supply back up, continuing your instructions. Your post (8 Sep 2017) re installing new rootfs seemed to go OK until (forum.doozan.com/read.php?2,12096) Note 1 -- was unable to remove rm /etc/ssh/ssh_host* rm: cannot remove '/etc/ssh/ssh_host*': No such file or directory Did not go any further Also, what should I expect to see? Last line (serial consolby radiodude - Debian
Here ya go: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 u-boot>> setenv usb_set_bootargs 'setenv bootargs console=$console root=LABEL=rootfs rootdelay=1by radiodude - Debian
U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 u-boot>> printenv arcNumber=2097 baudrate=115200 bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; runby radiodude - Debian
> It has Jeff/davygravy old 2011 u-boot installed. Is this u-boot ok, or would it be better to replace with a newer one? > You don't have any USB drive plugged in. > > >[ 0.000000] Linux version 2.6.22.18 (bdietrich@bu > ildman) (gcc version 4.2.1) #81 Tue Oct 19 16:05:0 > 0 PDT 2010 > > > -sh-4.3# > > So it booted into stock Pogo OSby radiodude - Debian
Hello, all First time poster. I "inherited" a broken E02 and want to see if I can salvage it. Not sure what happened previously but could never ssh into it. Just received USB TTL converter and soundblaster cable, hooked it up and at least it's talking to me. Have been reading LOTS here, learning much -- but still not understanding much of what Pogo's telling me. Here'sby radiodude - Debian