@hmartin Just a wild guess: Maybe you have to tell the MCU to stay off? Standard behaviour is to boot if there is power.by esion - Debian
@bodhi I think there was no progress on Power LED and proper Power Off. The system halts on shutdown but the mcu is still running. The Power Button does no shutdown or restart. Power LED keeps blinking. @hmartin For strace I would have to boot to stock, right? Output of the mcm-daemon on telnet: root@debian:# telnet localhost 57367 Trying ::1... Trying 127.0.0.1... Connected to locaby esion - Debian
Thanks for the help guys! :) Any chance of getting control over the power LED or the display maybe?by esion - Debian
Updated the kernel to the latest version with the latest dtb (toootal horror with just a little knowledge and no howto), it seem's to work: [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial mtdparts=armada-nand:5m@0(u-boot),5m@5m(kernel),5m@10m(uRamdisk),441m@15m(image.cfs),15m@456m(rescue_fw),20m@471m(config),10m@491m(reserve1),10mby esion - Debian
root@debian:~# fw_printenv | grep dtb fdtfile=armada-38x-modular.dtb Loads the wrong one, right?by esion - Debian
root@debian:~# dmesg | grep tty [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial mtdparts=armada-nand:5m@0(u-boot),5m@5m(kernel),5m@10m(uRamdisk),441m@15m(image.cfs),15m@456m(rescue_fw),20m@471m(config),10m@491m(reserve1),10m@501m(reserve2) [ 1.152483] console disabled [ 1.176464] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irqby esion - Debian
Booted the original firmware: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 44) is a 16550A console enabled f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 45) is a 16550Aby esion - Debian
Okay, just updating the dts.. Wasn't sure any more.. ;) Just rebooted with the new dts, serial is showing up: root@debian:~# dmesg | grep tty [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial mtdparts=armada-nand:5m@0(u-boot),5m@5m(kernel),5m@10m(uRamdisk),441m@15m(image.cfs),15m@456m(rescue_fw),20m@471m(config),10m@491m(reserveby esion - Debian
> @esion, > Let me make the new EX4100 DTB and upload here. @bodhi: Would be cool if you could wrap up how to install. Has been a while since I read the whole thread. ;)by esion - Debian
I sure took either an already combined kernel or a dts from one of bodhi's post in this thread. If it helps, i could boot up the original firmware later today.by esion - Debian
I installed as per description on Github and used the default .ini. dmesg | grep tty doesn't show any output.by esion - Debian