Hi davygravy, Thank you for your help. I'll try to do your advice. There are a lot of details step, I'll check them. When I'm encounter any issue, I'll post here. Thank you. davygravy Wrote: ------------------------------------------------------- > alphaprime Wrote: > ------------------------------------------------------- > > Hi, > > &gby alphaprime - Debian
Hi, I'm running tailscale on my PogoV4. It's on 5.15 kernel and debian Strecth. I'm trying use their provided arm binary (https://pkgs.tailscale.com/stable/) ==> arm: tailscale_1.18.1_arm.tgz It's running with that binary and not installed, just run the command. The problem I'm facing is when I close this terminal, it's exit the service. Anyonby alphaprime - Debian
Hi Bodhi, Now my pogo boot with U-boot & Debian so far running normally on MMC drive. Thank you for your support I'll play a while with this, I'll ask again if I don't know how to solve it I'm sorry if I disturb you Thank youby alphaprime - uBoot
Hi Bodhi, I've follow step 1 & 2. There was below error after attaching my SD card to Pogo loading envs from mmc 0 ... ** File not found /boot/uEnv.txt ** running scan_disk ... Then I create my own /boot/uEnv.txt file After loding again, then it says that having bad CRC U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:34:01 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1by alphaprime - uBoot
Hi Bodhi, I'm trying to follow the guide, I found out that both kwboot that you mention didn't work out on my linux netbook. This is my linux netbook $ uname -a Linux 4.4.0-21-generic #37-Ubuntu SMP Mon Apr 18 18:34:49 UTC 2016 i686 i686 i686 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Linux Lite 3.0 Release: 16.04 Codenby alphaprime - uBoot
Hi Daviddyer, Thank you for giving me some light on this. Currently I don't have Raspi yet. But I will study thread on the link you provided. My question is: - Does this the cheapest (easiest) way to recover my pogo? - Boot using SATA port or USB top port is impossible on this situation? - My pogo is Pogoplug V4-A3 and the tutorial is for Pogo E2. Which part will be different? caby alphaprime - uBoot
Hi Bodhi, Thank you for your response. If you have free time, please help me to recover my Pogo. Currently still confuse what method to recover my Pogo. Thanksby alphaprime - uBoot
Greetings, Please help.... apparently I've made my Pogoplug V4 unable to boot. Front Led always off all the time, not blinking at all, not even the green one. Serial connection status are connected, but no booting text coming on screen. Only blank screen appear. Also unable to send command on serial. Ok, so before this thing happen. I'm trying to use my pogoplug as NAS serverby alphaprime - uBoot