Hello I like to install alsa-base but is not available. root@Pogoplug-Pro:~# apt-get install alsa-base Reading package lists... Done Building dependency tree Reading state information... Done Package alsa-base is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Packagby dippes - Debian
Hello bodhi, In every reboot I need to give this command. How can you saved this command permanently? setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data) earlyprintk=serial' setenv dt_bootm 'bootm $uimage_addr $uinitrd_addr $dtb_addr' setenv dt_usb_boot 'run dt_load_uimage; run dtby dippes - Debian
Its really a Pogoplug-Pro.With the 4 lines the device running.But afte the reboot i need to refresh the lines. How can you saved it permanently? setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data) earlyprintk=serial' setenv dt_bootm 'bootm $uimage_addr $uinitrd_addr $dtb_addr' setenv dtby dippes - Debian
with setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data) earlyprintk=serial' setenv dt_bootm 'bootm $uimage_addr $uinitrd_addr $dtb_addr' setenv dt_usb_boot 'run dt_load_uimage; run dt_load_initrd; run dt_load_dtb; run dt_bootm' U-Boot SPL 2013.10 (Apr 27 2014 - 19:08:27) Boby dippes - Debian
Hello bodhi i use SanDisk Cruzer 8 GB stick and try 3 different USB drives. Bevor my Pogo crashed all my USB Sticks working fine. us 001 Device 105: ID 0781:5567 SanDisk Corp. Cruzer Blade Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDevby dippes - Debian
this is the mountpoint from the usb stick in my Linuxmachine root@HP-Server ~ > mount -t ext3 /dev/sdc1 /media/stick root@HP-Server /media/stick > ls -l insgesamt 184052 drwxr-xr-x 2 root root 4096 Aug 1 10:36 bin drwxr-xr-x 3 root root 4096 Aug 2 10:29 boot -rw-r----- 1 root root 188188318 Jan 10 17:14 Debian-4.4.54-oxnas-tld-1-rootfs-bodhi.tar.bz2 drwxr-xr-x 5 rby dippes - Debian
root@HP-Server / > fdisk /dev/sdc Befehl (m für Hilfe): o Building a new DOS disklabel with disk identifier 0x3854c2be. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. Warnung: Schreiben wird ungültiges Flag 0x0000 in Part.-tabelle 4 korrigieren Befehl (m für Hilfe): n Partition type:by dippes - Debian
hello bodhi, With rootfs "Debian-4.4.54-oxnas-tld-1-rootfs-bodhi.tar.bz2" the same. stop by [ 0.371230] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver also without the mtdpartsby dippes - Debian
bodhi, the same stop [ 0.281049] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driverby dippes - Debian
Hello bodhy with the three lines the device boot until [ 0.281228] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.17.0-oxnas-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Sat Oct 25 15:59by dippes - Debian
OX820 # printenv autoload=no baudrate=115200 bootargs=console=ttyS0,115200n8 bootcmd=run dt_bootcmd_usb bootdelay=10 console=console=ttyS0,115200n8 dt_bootcmd_usb=usb start; run dt_usb_bootcmd; usb stop; reset dt_bootm=bootm $uimage_addr $uinitrd_addr dt_load_dtb=ext2load usb 0:1 $dtb_addr /boot/dts/ox820-pogoplug-pro.dtb dt_load_initrd=ext2load usb 0:1 $uinitrd_addr /boot/uInitrd dtby dippes - Debian
I have tried other Stick but it boots up to this point and then it breaks up. See the attachment below. \0x08\0x08\0x08 7 \0x08\0x08\0x08 6 \0x08\0x08\0x08 5 \0x08\0x08\0x08 4 \0x08\0x08\0x08 3 \0x08\0x08\0x08 2 \0x08\0x08\0x08 1 \0x08\0x08\0x08 0 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storby dippes - Debian
No, my POGO didn't start eventhough I've tried a lot of USB stick, are my POGO damaged? or there is any possible way to rescue it.by dippes - Debian
Sorry it was my failure dippest-VirtualBox rootfs # ls -l insgesamt 84884 drwxr-xr-x 2 root root 4096 Nov 1 2014 bin drwxr-xr-x 3 root root 4096 Nov 1 2014 boot -rwxrwx--- 1 root vboxsf 86736625 Jan 3 19:00 Debian-3.17.0-oxnas-tld-1-rootfs-bodhi.tar.bz2 drwxr-xr-x 5 root root 4096 Feb 24 2012 dev drwxr-xr-x 51 root root 4096 Jan 1 1970 etc drwxr-xr-by dippes - Debian
Hello, the device don`t like to boot with Debian-4.4.54-oxnas-tld-1-rootfs-bodhi.tar.bz2 Debian-3.17.0-oxnas-tld-1-rootfs-bodhi.tar.bz2 Have you any idea? U-Boot 2013.10-tld-3 (May 15 2014 - 14:54:14) for OXNAS DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: Led:\0x09GREEN mii0 Main Loop Hit any key to stop autoboot: 10 \0x08\0x08\0x08 9by dippes - Debian
Hello I have a Pogoplug (POGO-P24) and sadly to say my stick with Kernel 3.17 are damaged, at this moment I have only a rootfs with Kernel 2.6.31.14_0x820_10_Shv.P21. Is there any available complete rootfs with Kernal 3.17 or higher what boot with U-Boot 2013.10-tld-3 (May 15 2014 - 14:54:14) for OXNAS? U-Boot 2013.10-tld-3 (May 15 2014 - 14:54:14) for OXNAS DRAM: 128 MiB NAND:by dippes - Debian