bodhi, Thanks for the info. I'm happy now systemd is working in my pogo box. hkguyby hkguy - Debian
bodhi, Here is the log... Thanks, hkguy OX820> OX820> printenv bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; run bootcmd_stock; reset bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000by hkguy - Debian
bodhi, Here is the console log. Hmm... the parameters in uEnv.txt just do not come to effect. Thanks, hkguy U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)by hkguy - Debian
bodhi, Here is the log. Thanks, hkguy U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: seby hkguy - Debian
bodhi, I need your help. I followed the instructions to bring up my Pogoplug Pro. I installed these binaries uboot.2015.10-tld-2, linux-4.4.124-oxnas-tld-1and Debian-4.4.54-oxnas-tld-1-rootfs to my pogo box. I want to use systemd to boot the box using uEnv.txt. u-boot reads the uEnv.txt for sure because the console log shows that 32 bytes read in 124 ms. However, it just did not take effecby hkguy - Debian