That worked bodhi, thank you! My uEnv.txt $custom_params is appended as expected now from dmesg: [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1M(u-boot),-(rootfs) init=/bin/systemd I'm guessing this happened because I did this during debian install from here: https://forum.doozan.com/read.php?2,12096 Step 4b: cat dtby trent - Debian
Bohdi, yes I agree it should work because everything looks good, but for some reason the custom params still aren't passed in for the kernel. Strange. netconsole log: starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) 1 Storage Device(s) foundby trent - Debian
Yes, I meant netconsole, sorry. Here are the outputs: printenv: printenv arcNumber=3542 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $loadby trent - Debian
Hmm that address seems like it should have worked then. No I do not have a serial cable, but my netboot is working if that helps. Any other ideas? Thanks againby trent - Debian
bodhi Wrote: ------------------------------------------------------- > > fw_setenv uenv_import 'echo importing envs ...; > env import -t 0x60500000 $filesize' > Hi bodhi, I have a pogoplug E02. I had the same issue loading uEnv.txt as the OP. I noticed that in my fw_printenv I have the following: uenv_addr=0x810000 uenv_import=echo importing envs ...; env impoby trent - Debian