Show all posts by user
Discuss all things Debian on your device
Re: serial console with putty - 9 years ago
help me to understand what u boot.mtd0.dockstar.original.kwb file = uboot.2014.07-tld-2.dockstar.mtd0.kw that the ce_kernel_redstone_v63.img = ??? ce_ramdisk_v2.0b.img = ??? I find a tutorial with the file: uboot.mtd0.dockstar.jeff-2010-10-23.kwb uImage-mtd1.img rootfs-mtd2.img but like I can not operate the plant has had its launch DockStar :( I would just make a same installation fileby DJDavid - Debian
Re: serial console with putty - 9 years ago
hello I do not understand with google translation these are commands that I use my DockStar my works except the installation of Debian. I have no message to install debian # Starting debootstrap installation E: unrecognized or invalid option --no-check-gpg debootstrap failed. See /tmp/debian/debootstrap/debootstrap.log for more information. I would just like to install debian uboot eveby DJDavid - Debian
Re: serial console with putty - 9 years ago
ok but for now I can not even install debian whether Debian Wheezy or Debian Squeeze here is the error message I :( # Starting install debootstrap E: unrecognized or invalid --no-check-gpg option debootstrap failed. See /tmp/debian/debootstrap/debootstrap.log for more information.by DJDavid - Debian
Re: serial console with putty - 9 years ago
ok thank you but I hang here: cd / tmp tar -xf uboot.2014.07-tld-2.dockstar.bodhi.tar because how the meter for download to / tmp ?? thank youby DJDavid - Debian
Re: serial console with putty - 9 years ago
problem solved here is this is the cable but not on the side of the branchemant DockStar but it was necessary to contact a usb side Now I would like to have if possible the tutorial Pourr install the new Uboot, kernel and ramdisk for I uses the following files: uboot.kwb uboot.mtd0.dockstar.original.kwb ce_kernel_redstone_v63.img ce_ramdisk_v2.0b.img it's the original file so oveby DJDavid - Debian
Re: serial console with putty - 9 years ago
so I finally succeeded with debian with the terminal by causing root: -fn screen -U / dev / 115200 ttyUSB0 I see the same but I still can not type a command it is possible that this is the cable? I want to clarify that I had already managed to access the serial port with putty on windows but suddenly it works more so this is why I do not understandby DJDavid - Debian
Re: serial console with putty - 9 years ago
Hello and thank you for your help -bodhi. but I remade several times to try the connection on the other pc but always the same. just be a problem with the cable nokia c42 so I order another. (PL2303HX USB To RS232 TTL Auto Converter Adapter Module For arduino W/ Cables) I like to try debian because I read on a forum that already and will happen problem but with putty on debian I have anby DJDavid - Debian
serial console with putty - 9 years ago
hi I have a problem when I use the serial console with putty I see testing the moving, but I can not interrupt the when I press a key "enter space ect ..." ca does nothing bizard especially before this run it's possible that I install a security in the DockStar? if qq'un has a solution for now I am block ....by DJDavid - Debian
DockStar down - 9 years ago
Hello everyone! I put my hand on my DockStar (down) so I tried to fix it but now I have another message of erreure is the message: C:\Documents and Settings\DJ>openocd -f board/dockstar.cfg Open On-Chip Debugger 0.4.0 (2010-02-22-19:05) Licensed under GNU GPL v2 For bug reports, read http://openocd.berlios.de/doc/doxygen/bugs.html parport port = 0x378 trst_and_srst seby DJDavid - Debian
Re: Debian on Dockstar on a usb - 10 years ago
hello I really need help my docksat's not even light up so I'm this tutorial: http://www.yourwarrantyisvoid.com/2010/09/08/dead-dockstar-resurrected-with-jtag / ca for me was already happen a few years ago but here is the error message I then all looks good plug Microsoft Windows Copyright (c) 2009 Microsoft Corporation. Tous droits réservés. C:\Users\PC>openocd -f boarby DJDavid - Debian
Re: Debian on Dockstar on a usb - 10 years ago
ok thank you;) I'll try as soon as I fix my Dockstar because I have a problem to re install the uboot with cable ca-42 CE>> setenv ipaddr 192.168.0.21 CE>> setenv netmask 255.255.255.0 CE>> setenv serverip 192.168.0.1 CE>> saveenv CE>> nand erase 0x100000 0x400000 CE>> tftp 0x800000 ce_kernel_redstone_v63.img CE>> nand write.e 0x800000 0by DJDavid - Debian
Re: Debian on Dockstar on a usb - 10 years ago
thank you but it looks complicated to do: (by DJDavid - Debian
Dockstar Jtag Help please - 10 years ago
Hello Here is my problem My Dockstar is connected in serial (CA-42) with Putty on Windows 7 U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 u-boot>> seby DJDavid - uBoot
Debian on Dockstar on a usb - 10 years ago
Hello is there a way to install Debian on Dockstar on a usb key from a pc running Debian without using the Dockstar thank youby DJDavid - Debian
restarts the boot but not on my HDD - 12 years ago
Hello all I have a problem with my DockStar when I did: reboot restarts the boot but not on my HDD which is connected to the upper USB to start over I must be disconnected and reconnected! t there a solution?? thank youby DJDavid - Debian
Re: conventional LCD TV ? - 12 years ago
Hello petergunn here I have finally managed to coompiler without error the problem is with the Google translation is not always properly I managed to see the screen how to make starx runs at startup?? thank you very much!by DJDavid - Debian
Re: conventional LCD TV ? - 12 years ago
I galley I have kernel 2.6.35.7-DockStar I still have the same error message when compiling tar xvfz xserver-xorg-video-displaylink_0.3.orig.tar.gz cd xf86-video-displaylink vi src / displaylink.c # comment out the Following lines ... / / # include "xf86Resources.h" / / # include "xf86RAC.h" / / PScrn-> racMemFlags RAC_FB = | RAC_COLORMAP | RAC_CURSOR | RAby DJDavid - Debian
Re: conventional LCD TV ? - 12 years ago
ok I'll try I'll let you know but I will find kernel linux-image-2.6.39-DockStar-server_1.2_armel.deb if I dockstarheavy.deb renames in the script that you have posted this is ok? because I is not found the right dockstarheavy.deb can you pass me the file displaylink.c already changed because I'm not about to do as they should it should as I type these commands to installby DJDavid - Debian
Re: conventional LCD TV ? - 12 years ago
hello petergunn I've tried to follow your tutorial but here is the problem how? Kernel with what should I install? root@debian:~# uname -r 2.6.35.7-dockstar root@debian:~# cd /tmp root@debian:/tmp# tar xvfz xserver-xorg-video-displaylink_0.3.orig.tar.gz udlfb/ udlfb/README udlfb/Makefile udlfb/udlfb.c udlfb/udlfb.h xf86-video-displaylink/ xf86-video-displaylink/ChangeLogby DJDavid - Debian
Re: debootstrap failed - 12 years ago
Hello pazos I do not understand what you ask me but parcontre ca boot on my USB Key is therefore the possibillity of t he fixed my problem by being in Debian thank youby DJDavid - Debian
Re: debootstrap failed - 12 years ago
Now I have another problem here is what it tells me when I'm connected to the serial port: U-Boot 2010.09 (Oct 23 2010 - 11:49:22) Marvell-Dockstar/Pogoplug by Jeff Doozan SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB: Registeby DJDavid - Debian
Re: debootstrap failed - 12 years ago
hello davygravy I tried that thank you for your help;-)by DJDavid - Debian
Re: debootstrap failed - 12 years ago
Salvation davygravy Thank you for your response I it is not which I used I followed a tutorial is his be: ce_kernel_redstone_v63.img ce_ramdisk_v2.0b.img How do I? otherwise I just even install Debian Lenny that I install? Thank youby DJDavid - Debian
debootstrap failed - 12 years ago
Hi all I managed to repair my DockStar with Jtag TIAO but now when I install Debian seen the script with Jeff I was error message: W: http://cdn.debian.net/debian/pool/main/z/zlib/zlib1g_1.2.3.4.dfsg-3_armel.deb was corrupt W: Couldn't download package zlib1g (ver 1:1.2.3.4.dfsg-3 arc armel) I: Chosen extractor for .deb packages: ar W: Failure trying to run: chroot /tmp/debian mountby DJDavid - Debian