Maybe I got some idea. I have Ubuntu on my PC in VirtualBox. When I run terminal, I have to put "sudo" before all executions (suda tar ...., sudo mkimage ...). But when I run "sudo cat dts/kirkwood-goflexnet.dtb >> zImage.fdt " I got "You have no permission." So I had to chmod 777 zImage.fdt and then it run correctly. Well my point is: Is it possible, that I maby drakul - Debian
Guys bodhi and 1000001101000, thank you so much for your time. But I'm still stuck at this: U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:54:15 -0700) ZyXEL NSA310 1-Bay Power Media Server SoC: Kirkwood 88F6281_A1 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 PHY reset timed out MV88E1318 PHY initialized on egigby drakul - Debian
Thank you very much for your suggestions. I printenv from uBoot: NSA310> printenv arcNumber=4022 baudrate=115200 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else iby drakul - Debian
Hi guys, pls I used the last uBoot (flashed via UART with kwboot-tool). Then I plugged new HDD to my PC, formated that HDD in Ubuntu to EXT3 and then extracted Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2. After this I plugged that HDD to my NSA310. Im tried almost all possible things (reinstalling uBoot, HDD reformat, ...), but Im still stuck at (initramfs) and I cant run debian. Can sbdyby drakul - Debian