Hi, after update to new kernel (5.6.5 Kirkwood) I am without a networkcard When I try modprobe r8168 everything look good Is the right solution remove the r8168.conf from a /etc/modprobe.d directory and add r8168 to /etc/modules? With this method everything work, only echo “r8168”>> /etc/modules was not enought Lby Lobo - Debian
Hi Bodhi, thank You a lot - everything work ok, sharing, leds please one more think: do You have an idea about speed of this sharing? In original firmware it was (over NFS) 55/35 MBs. Now is it about 35/35. Where there may be a bottleneck? Lby Lobo - uBoot
Hi, all work ok, samba speed is (r/w) on 25/25 Mbps, scp 8Mbps (in openwrt it was 10/10 and 2.5/2.5) - that is much better I have one more question please - are here some recommended things after debian installation? For example - install firmware-linux-free/nonfree or something other packages, some specific settings for NSA310? Thank You and have nice day Lby Lobo - uBoot
it is ok, installanion was ok - thank You a lot for Your patience there was only one little problem after installation: ethernet card is now enp1s0 not eth0 /etc/network/interfaces look now: auto lo enp1s0 iface lo inet loopback iface enp1s0 inet dhcp Thank You again Lby Lobo - uBoot
is it this? https://forum.doozan.com/read.php?3,38889,40094#msg-40094 and correct uboot.2016.05-tld-1.environment.img is from here?: https://www.dropbox.com/s/4smmw2wr4ugayz9/uboot.2016.05-tld-1.environment.bodhi.tar and what mean "fw_setenv mtdparts 'xxxxxxxxx' (forgotten :-()"? sorry for many question, but I'am not a IT :( thank You a lotby Lobo - uBoot
than You a lot Bodhi - after disc creation ("Updated 25 Aug 2019" post) and copying uboot.2016.05-tld-1.environment.scr (from the attached file) to /boot/ o this disk and root@debian-netbook:/home/bada# kwboot -t -B 115200 /det.2017.07-tld-1.nsa310.mtd0.kwb -p Sending boot message. Please reboot the target...| Sending boot image... 0 % [.................................by Lobo - uBoot
thank You a lot Bodhi, here is it: NSA310> ver U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:54:15 -0700) ZyXEL NSA310 1-Bay Power Media Server gcc (Debian 6.3.0-18) 6.3.0 20170516 GNU ld (GNU Binutils for Debian) 2.28 NSA310> printenv baudrate=115200 bootcmd=ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000 bootdelay=3 console=console=ttyS0,115200 ethact=egiga0 ethaddrby Lobo - uBoot
I'm sorry, I found the problem - I didn't interrupt boot right after kwboot -p - now I'am in second step but: NSA310> usb reset resetting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found NSA310> fatload usb 0 0x0 0x800000 uboot.kwb readiby Lobo - uBoot
Hi boodhi, sorry for long time break (a lot of work) I tried it again, but: root@debian-netbook:/home/bada# kwboot -t -B 115200 /det.2017.07-tld-1.nsa310.mtd0.kwb -p Sending boot message. Please reboot the target...| Sending boot image... 0 % [................................................ 1 % [................................................ 3 % [...........................by Lobo - uBoot
many thanks, I really thougth I had the right uboot. I'll try it again in the eveningby Lobo - uBoot
Hi, here is it: U-Boot 2019.01 (Jun 28 2019 - 19:49:33 +0000) ZyXEL NSA310 1-Bay Power Media Server SoC: Kirkwood 88F6281_A1 DRAM: 256 MiB NAND: 128 MiB MMC: Loading Environment from NAND... OK In: serial Out: serial Err: serial Net: egiga0 PHY reset timed out MV88E1318 PHY initialized on egiga0 Hit any key to stop autoboot: 0 NSA310> ver U-Boot 2019.01by Lobo - uBoot
ok thank You a lot, I will try it - but I am not sure - I think I installed correct version can there be a problem whit install ower kw boot?by Lobo - uBoot
Hi, I tried to install debian on zyxel310 nas server, because I had problems with original fw (nfs freeze and some other). Nex time I tried openwrt, but there is some problem with speed over net (samba/nfs/sshfs - all are slow) But when I tried debian - http://davidegironi.blogspot.com/2018/12/debian-and-openmediavault-on-zyxtel.html I have problem with step 2 uboot does not see usb:by Lobo - uBoot