Thx bodhi, I'm looking for a way to reset the box the original firmware state, if anything goes wrong. Later yesterday evening I found the command printenv which dumps all the env settings which are currently set. I've recorded both the stock env settings and the settings of the 2017.07 U-Boot (see below). If I understood things correctly, it should be possible to switch back to tby Alatun - uBoot
Hi there! I've been testing the debian install like documented here in the forums on my NSA325. I've got a serial connection and was successful in running ./kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p with an attached USB stick prepared with the Debian kirkwood rootfs. So I could test the whole thing, without modifying the original setup. Whatby Alatun - uBoot