Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~# ls . .. .bash_history .bashrc .config .nano .profile .ssh root@debian:~# Ah, it is sata boot from MyCloud Mini. NAND boot not working... U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0by Kang Jinsu - Debian
Yes, E02 is already done. I ordered the P22, However, it contains a completely different E02, which makes it difficult. It is impossible to return because it is overseas shopping. It is a pity. Fortunately, it's the same as the V4, so it's easy to work with. E02 boots well. The rescue system was also possible. I hope Akitio is also possible easy, though. OXNAS doesn'tby Kang Jinsu - Debian
I haven't been able to do this for another while. Well, is this problem still ongoing? It's been taking quite a long time... I think this problem is difficult. Hmm... I removed the thermal pad on the CPU side, (There was not originally. To prevent problems by overheating the CPU.) so the booting is a bit unstable, but it works. When will this problem be solved? Thank you evby Kang Jinsu - Debian
The sata link down or panic occurs continuously. Infinite repeat... U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /boot/bootargs.bin ** U-Boot 2013.10-g3a0fby Kang Jinsu - Debian
Operation completed. Boot hangs in the middle. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /boot/bootargs.bin ** U-Boot 2013.10-g3a0f380-dirty (Jul 26 201by Kang Jinsu - Debian
Well, a new Debian is up. I will write to the HDD. There is also Kernel below, should I do this too? It will take time.by Kang Jinsu - Debian
I've tried NAND several times, but it doesn't work. U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Enter all the commands in the post. The results are the same. + And, another new thing After erasiby Kang Jinsu - Debian
Uh... Is that so? Thank you for your advice. It's only HDD boot.by Kang Jinsu - Debian
Here serial console logs. root@debian:~# flash_erase /dev/mtd0 0 0 Erasing 128 Kibyte @ 7f5dcf5c00000064 -- 112 % complete root@debian:~#by Kang Jinsu - Debian
Here serial console logs. U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Setby Kang Jinsu - Debian
Here serial console logs. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /boot/bootargs.bin ** U-Boot 2013.10-g3a0f380-dirty (Jul 26 2014 - 10:18:57) for OXby Kang Jinsu - Debian
Well, is it because the device is too hot? Boots up after cooling. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /boot/bootargs.bin ** U-Boot 2013.10-g3a0f380by Kang Jinsu - Debian
HDD freezes or does not tik tik, but continuous boot error ... U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /boot/bootargs.bin ** U-Boot 2013.10-g3a0f380-dirtby Kang Jinsu - Debian
Here serial console logs. root@debian:~# flash_eraseall flash_eraseall has been replaced by `flash_erase <mtddev> 0 0`; please use it flash_erase: error!: no MTD device specified flash_erase: error!: no start erase block specified flash_erase: error!: no erase block count specified flash_erase: error!: Try `--help' for more information root@debian:~# flash_eraseall /dev/mtd0by Kang Jinsu - Debian
Here serial console logs. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /boot/bootargs.bin ** U-Boot 2013.10-g3a0f380-dirty (Jul 26 2014 - 10:18:57) for OXNASby Kang Jinsu - Debian
Here serial console logs. 1. Change HDD to low capacity and low power. 2. The power supply part has been modified. (Dedicated adapter-> high current power supply, power plug-> extension) U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008bby Kang Jinsu - Debian
NAND was repaired and rebooted. 256M properly caught. (But NAND looks bad ...) I accidentally booted without USB and it works. Here serial console logs. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Buby Kang Jinsu - Debian
Thanks for your advice. First, I'll fix NAND one more time, and if not, think of it as a way of HDD.by Kang Jinsu - Debian
Uh... not booting. + Umm. No. The device's NAND has a capacity of 256M. I tried to install 2G NAND, but this NAND is because the manufacturer is samsung. The originally installed NAND is hynix. Well, I have to try fix again.by Kang Jinsu - Debian
Here serial console logs. root@debian:~# ls . .. .bash_history .bashrc .config .nano .profile .ssh root@debian:~# ls / . bin dev home lost+found mnt proc run srv tmp var .. boot etc lib media opt root sbin sys usr root@debian:~# ls /tmp . .. root@debian:~# cd /tmp root@debian:/tmp# wget ftp://admin:**********@192.168.68.1/HDD1/My-Station/Networby Kang Jinsu - Debian
Here serial console logs. * For reference, all NANDs have been erased. Attempting to remove NAND by installing SPI FLASH last time, Also, the peripheral circuit was slightly damaged by mistake. So, NAND's condition is a bit poor. (The error 'mtd erase failed and mtd lock *****' continued, but is now repaired.) I have repaired the NAND, but I am not sure if it will work.by Kang Jinsu - Debian
Uh, Sudden power failure yesterday, the device turned off. Here serial console logs. Success booting. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /boot/bootby Kang Jinsu - Debian
Here second logs : so long... logs.txtby Kang Jinsu - Debian
Uh, i understand. sorry. Here serial console logs. Umm, error again... U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /boot/bootargs.bin ** U-Boot 2013.10by Kang Jinsu - Debian
Here serial console logs. * When I didn't enter the command : root@debian:~# shutdown -r now Broadcast message from root@debian (ttyS0) (Thu May 14 23:49:12 2020): INIT: Sending Using makefile-style concurrent boot in runlevel 6. [....] Stopping busybox' klogd implementation: klogd1261 (klogd) Stopped klogd (pid 1261). . ok [ ok ] Stopping Avahi mDNS/DNS-SD Daemon: aby Kang Jinsu - Debian
Here serial console logs. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /boot/bootargs.bin ** U-Boot 2013.10-g3a0f380-dirty (Jul 26 2014 - 10:18:57) for OXNASby Kang Jinsu - Debian
Thank to your advices. + I think it seems to have done a USB boot. After removing the USB, the letters come out with an error. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** Fiby Kang Jinsu - Debian
I think I forgot to reformat the hard disk before and didn't set it up ... Oh, by the way, it seems to boot suddenly. Here serial console logs. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Busby Kang Jinsu - Debian
Umm, i am sorry. Here serial console logs. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /boot/bootargs.bin ** U-Boot 2013.10-g3a0f380-dirty (Jul 26 2014 -by Kang Jinsu - Debian
Here serial console logs. U-Boot SPL 2013.10-g3a0f380-dirty (Jul 26 2014 - 14:31:34) Boot device: SATA Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set Bus 0: OK Device 0: ** File not found /boot/bootargs.bin ** U-Boot 2013.10-g3a0f380-dirty (Jul 26 2014 - 10:18:57) for OXNASby Kang Jinsu - Debian