Hey bodhi. I already posted here and you probably missed it, but I will do it again. I managed to create the rootfs labeled USB flash drive with Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2 29 August 2019 update. But I dont know how to make it boot on my Netgear Stora. Here are the Stora stock uboot printenv: Marvell>> printenv baudrate=115200 loads_echo=0 ipaddr=10.4.50.165by stormy - uBoot
> Create this rootf on USB, and remember to do Step > 4: > > > QuoteUpdated 25 Aug 2019: > > Basic Debian buster Kirkwood rootfs for most > Kirwood plugs: > > - tarball size: 209M > - install size: 536M > - The init system used in this rootfs is sysvinit > . To boot with systemd, see note 2 below. > - Installed packages: nano, avahi,by stormy - uBoot
> Ah. Paul already has flashware.img. But in your > post, you should attach that file any way. It will > be useful for future unbricking Stora (I think > this is a common problem). I tried a couple of days ago to attach flashware.img but its bigger than 1000k. I think is 1MB so 1024K.by stormy - Debian
> I will come back and show you how to adjust the > envs to boot this USB rootfs. Thank you very much bodhi. Im not familiar with many of the terminologies in those instructions but ill try to follow and if i get choked i will ask you for some air. See you tomorrow. Hope Paul gets his s*it box back together too following those steps that i made. Also do you know whats up with thosby stormy - uBoot
bodhi Wrote: ------------------------------------------------------- > Paul, > > stormy has figured out the recovery with > flashware: > > https://forum.doozan.com/read.php?3,104929,105219#msg-105219 Hey bodhi. Thanks again for your help. Maybe when you have the time you can look at my other questions in that post. PS: What do you need from me to upload? The u-bby stormy - Debian
Hey bodhi. First of all thanks for your help. I managed to recover the Netgear Stora MS2110 to stock u-boot. Here is what I did: -create USB flash drive with ext2 filesystem and a single primary partition(I used easeus partition master 14 which by default makes the USB partition logical and uboot cannot see it - so be carefull to make the usb partition primary) -copy flashware.img in roby stormy - uBoot
Hey bodhi. Sorry ive been busy with work and didnt have time to reply. Here is what ive tried: I followed the instructions for uboot recovery with flashware.img like in that post, but encountered some problems and didnt continue. Here are my problems: When verifying CRC32 for u-boot.mtd0 on my PC and the flashware.img loaded in nand of stora I had diferrent results (I renamed u-boot.mtd0 to fby stormy - uBoot
bodhi Wrote: ------------------------------------------------------- > stormy, > > > Erasing Nand...Writing to Nand... done > > After this, you did reboot and still see the same > error? Yes. Every time it does this. Even though I cant set any environment variables with setenv command, I can issue regular commands without errors if the commands do not depend on enby stormy - uBoot
bodhi Wrote: ------------------------------------------------------- > stormy, > > You have the same problem as Paul does. > > https://forum.doozan.com/read.php?2,102054,104954#msg-104954 While fundamentaly we have the same problem, if you carefully look at the usb recovery from flashware.img messages are pretty diferent Paul's logs look like this: USB: sby stormy - uBoot
Hello guys. Could you please help me with some issues I have with a Netgear Stora MS2110? This thing was bricked when I got it. I tried to revive it but the official recovery server is history(very bad and disrespectful move if you ask me). So I started to look for ways to unbrick it and I found this forum. I started to play around with uboot and I have a serial connection established. In my &by stormy - uBoot
I have a flashware.img file from the openstora days. I dont know if it still works, but I will be happy to share it.by stormy - uBoot