Hi bodhi, I am unsure of the next step(s). I followed your guide using the instructions from 25 Aug 2019 for Debian rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2: https://forum.doozan.com/read.php?2,12096 I did everything as root, and in step 3 I changed the fstab file on the USB stick from ext3 to ext4 In step 5 I plugged in the USB stick to my NSA310 and powered it up buby dcompost - Debian
Hi bodhi and rayknight. Good news, the serial connection header is present on the PCB (see attached picture), and I do have a spare TTL<->USB converter in case something goes wrong and I need the serial connection to rescue the NSA310. I will power it up later this week and determine which .dtb file I should apply. Thank you both for taking the time to reply and help out. I willby dcompost - Debian
Hi Bodhi, Thank you for your reply. To enable the serial console, I should solder a serial connection like the attached picture (from the cnx-software article), correct? After that I will proceed with Debian rootfs and then new NSA310 u-boot. If I have misunderstood anything please let me know. -Christianby dcompost - Debian
Hi everyone. I have a NSA310 which I want to install Linux on. It seems to run original Zyxel firmware, so I assume I need to start from scratch. Reading various posts on this forum I get the hope that it is still viable in 2020 to load Linux onto this device. Can anyone here point to an updated step-by-step guide or maybe a series of relevant forum posts that I should follow, in orderby dcompost - Debian