Adding a third question: The raid 1 wiki entry mentions a thread about "Start with booting a SINGLE disk as normal from bodhi's kernel/rootfs thread, the second disk with the same partitions as the first, but empty." Is this another wiki article that I am not seeing? Thanks in advance.by Shadowhawke - Debian
Oh, one more question...do I need to remake the uImage whenever there is a change to the initramfs? Make that two questions. Would you have a sample uEnv.txt for the NSA325 while I start learning the uboot stuff? Thank you again so much for the help. This is fantastic.by Shadowhawke - Debian
Thank you for all your help. I have attached the boot log. Once this is completed, I did have questions of what kind of raid I should be using. LVM? mdadm? btrfs? are there any ptifalls given the small amount of ram involved with any of these? or the unique kernel setup?by Shadowhawke - Debian
Thank you for your help! It is now booting properly, and I installed the environment. I think all is well. Are there any other sanity checks you may suggest?by Shadowhawke - Debian
Well, I made some progress. I figured out how to flash uboot, and made the backups of mtd0 and the current environment as suggested in the thread. However, now I get an error. The full log is attached, but the detail is below. Getting closer, but your help would be appreciated. I have attached the full boot log in case something relevant is missing from this. U-Boot 2017.07-tld-1 (Sep 05by Shadowhawke - Debian
I intend it to be debian from here on out, so that is not an issue. However, I am not following how to do the upgrade in the stock firmware. If you, or someone else, could break down a step by step procedure for doing it in the stock firmware, I would deeply appreciate it.by Shadowhawke - Debian
I have been at this for a few days now, trying to follow the instructions at Linux Kernel 5.9.3 Kirkwood package and Debian rootfs. I have created the USB stick as described on the page there, but when I put the competed stick into my nsa325, it still boots to the stock firmware. My uboot version: U-Boot 1.1.4 (Sep 16 2011 - 17:51:53) Marvell version: 3.5.9 I did make the uImage with dtsby Shadowhawke - Debian