Hello Bodhi! Thank you for your help! "saveenv" always worked. The change to "rootfs_usb" was my last entry. Unfortunately "saveenv" can no longer be executed since then. LGE-NAS>> setenv bootargs_usb 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi_flash:0x78000@0(uboot),0x1000@0x78000(env) earlyprintk=serial' LGE-NAS>&gby gf - Debian
Hello Bodhi! For this reason, I have already changed the entry "root =" to "rootfs_usb" in the past. The HDD has the label "data" root=LABEL=rootfs_usb My USB now has the label "rootfs" again, and it starts anyway! 1st part Here a start with USB "rootfs" and an empty HDD "data". It is always started and loaded from USB, but /rby gf - Debian
Thank you Bodhi! I found this post on Sep 27, 2016 04:24 AM. > In the uboot installation thread: http://forum.doozan.com/read.php?3,12381 And here are my settings. I hope this helps. root@debian:~# fw_printenv Warning: Bad CRC, using default environment bootcmd=run distro_bootcmd bootdelay=2 baudrate=115200 stdin=serial,cros-ec-keyb,usbkbd stdout=serial,vidconsole stderr=seriaby gf - Debian
Hello Bodhi, #1 I wanted to undo my last change. Unfortunately I can no longer save "setenv". See below: �Normal mode boot start! _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** ** LGE-NAS BOARD: NT1 LE U-Boot 1.1.4 (May 21 2011 - 03:by gf - Debian
Hello N1T1 owners, I now run my device with Bodhi's Kernel 5.9.12. Finally an open system, thanks for that. I need help putting this device on standby. My first attempt with hdparm spoke to the HDD successfully. Unfortunately, it is reactivated after 3 minutes of running processes. Is it possible to put the device into energy saving mode with this kernel? Thanks in advance.by gf - Debian