thanks, Bodhi. But the pogoplug could not restart again. the light keep blinking in yellow. I could not find it's IP on my router anymore. I have been working on it for weeks by guessing and imagination. Finally it's over. Thanks for the help though.by puzzlednewbie - Debian
Both of the following two wget methods don't work. Same error message. wget: not an http or ftp url: wget http://www.dropbox.com/s/vgbshmiq3o14btp/uboot.2017.07-tld-1.pogo_e02.bodhi.tar wget --no-check-certificate Bodhi, I did exactly what you told me to do. the following is the uBoot envs. Is it good? rescue:/tmp# fw_printenv bootcmd_exec=run load_uimage; if run loadby puzzlednewbie - Debian
it looks like mission impossible to me. But I will try my best to work on it. I run into problems on the first step. I am not able to download https://www.dropbox.com/s/vgbshmiq3o14btp/uboot.2017.07-tld-1.pogo_e02.bodhi.tar rescue:/tmp# wget https://www.dropbox.com/s/vgbshmiq3o14btp/uboot.2017.07-tld-1.pogo_e02.bodhi.tar wget: not an http or ftp url: https://www.dropbox.com/s/vgbshmiby puzzlednewbie - Debian
hi, I have a pogoplug e02 that had debian installed. But the flash drive was dead. I was thinking to reinstall debian by following the Pogoplug E02 Debian Linux Installation Guide. without usb attached, the Pogoplug E02 boot into "rescue:~# " after I type in root/root (user/password). it's like this: rescue:~# As an linux newbie, I have been puzzled by "rescue:~# &by puzzlednewbie - Debian