Ok, problem solved! The problem was a broken copy&paste: "load_imagdr=0x02000000" should be "load_image_addr=0x02000000" Instead of using "usb start", you better have to "run usb_init" in order to execute two mw.l commands. Only this make the USB devices being recognized. Thank you, bodhi!by shaman - Debian
usb reset comes to the same result. I know that at the attempts before, there were 2 USB devices found and 1 storage device. Now, it doesn't make any difference, which USB slot I use. Ok, thank you for your help! I'm setting up a new USB drive! Kind regards, shamanby shaman - Debian
Thanks for your quick answer! Step 1 results in: osboxes@osboxes:/media/osboxes/rootfs/boot$ ls -lart total 51564 drwxrwxrwx 21 root root 4096 Jan 20 2017 .. drwxr-xr-x 3 root root 4096 Jan 10 22:36 boot-5.13.8 -rw-r--r-- 1 root root 205052 Jan 10 22:39 config-5.13.8-mvebu-tld-1 drwxr-xr-x 2 root root 4096 Jan 10 22:39 dts -rw-r--r-- 1 root root 9649821 Jan 10 22:39 iniby shaman - Debian
Hi bodhi, First of all, thank you very much for your strong efforts to keep our systems running, updated an alive! I very much appreciate your work here and I'm quietly following your manuals since years! And every manual was working fine, since my NSA325 broke a week ago. I bought a brand new NAS326 as a replacement and want to install a Debian on the box. I followed your instructions (Aby shaman - Debian