I test the file "armada-385-synology-rs816.dtb (19.5 KB)" attached to your previous previous post, and it works like a charm : both HDD ports are recognized : [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.1.8-mvebu-tld-1 (root@tldDebian) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35. 2) #1.0 SMP PREby emvivre - Debian
Good news, I found the problem, I fix it, and it works :) [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.1.8-mvebu-tld-1 (root@tldDebian) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35. ... [ 3.077808][ T10] ata1: SATA max UDMA/133 mmio port 0x100 irq 54 [ 3.086477][ T10] ata2: SATA max UDMA/133 mmby emvivre - Debian
Yes, indeed I used an old version (2019) which was not compatible with Armada 38x With the old one : $ kwboot Usage: kwboot [-b <image> | -D <image> ] [-B <baud> ] <TTY> -b <image>: boot <image> with preamble (Kirkwood, Armada 370/XP) ... With the last version : $ kwboot kwboot version 2023.04-rc2-g8c39999a-dirty Usage: kwboot [-b <imagby emvivre - uBoot
I look inside the both DTS but I do not find something interesting, it contain declaration of devices. Thank to the link of the post. Unfortunately it does not show both HDD : there is one USB and HDD that are recognized. I try with 5.19.2-mvebu-tld-1 kernel with armada-385-synology-rs816.dtb and I found the same problem : [ 3.081054][ T34] ata1: SATA max UDMA/133 mmio port 0x100by emvivre - Debian
For the previous post I have booted with the rs816 DTB. I though the .dtb could be problematic, so I have dump the .dtb of the DS218j as follow : $ cat /proc/mtd dev: size erasesize name mtd0: 000f0000 00010000 "RedBoot" mtd1: 002d0000 00010000 "zImage" mtd2: 00410000 00010000 "rd.gz" mtd3: 00010000 00010000 "vendor" mtd4: 00010000 0001000by emvivre - Debian
Hi, I don't know if the image should be compatible with a DS218j, but it looks like it does not work : $ sudo kwboot -b uboot.2023.04-rc1-tld-1.ds116.mtd0.kwb -p -t -B 115200 /dev/ttyUSB0 Sending boot message. Please reboot the target...- Sending boot image... BootROM - 1.73 (Boot) Booting from SPI flash General initialization - Version: 1.0.0 AVS selection from EFUSE disaby emvivre - uBoot
Hello everyone, I have a DS218j with 2 HDD, and the following boot commands recognize only one HDD slot : Marvell>> mw.l f1018100 00008000 Marvell>> scsi init AHCI init for unit0 Target spinup took 0 ms. SATA link 1 timeout. Error: SCSI Controller(s) 1B4B:9215 1B4B:9235 not found scanning bus for devices... Device 0: (0:0) Vendor: ATA Prod.: ST8000DM004-XXXX Rev: 0001by emvivre - Debian