Thanks, I guessed I have no other choice as I had also tried the reflashing of the original uBoot and it did not work. Are there any guides on step of how to recover or reflash my uBoot via serial connection? I am pretty new to this.by cohortcw - uBoot
Is there any way to recover my GFH unit if I have messed up my uBoot environment? I've edited my uBoot environment with a modified fw_setenv but I think it was not edited properly. I does not seems to be able to boot up now.by cohortcw - uBoot
Initially, I was able to get my unit to boot with a USB stick running a 3.3.2 kernel. I ran Jeff's script first and the script had updated my uBoot environment to the latest version. I did install a rescue boot nor did I setup netconsole as I am not sure how to setup the netconsole part. Thanks for all the help. I am not sure if I really need to get one of those serial convertor in ordby cohortcw - uBoot
Hi, I need help. My GFH was booting fine with a Debian Squeeze usb-stick but I was unable to get Debian installed in the SATA drive using Jeff's script. After I rebooted I am unable to enter into the SATA HDD w/o the USB stick. I changed my uBoot environment to accept boot from SATA as below. fw_setenv sata_boot 'ide reset; mw 0x800000 0 1; ext2load ide 0:1 0x800000 /boot/uImageby cohortcw - uBoot
Hi, After several days of meddling with ArchLinux on my GoFlex Home, I finally managed to get it booted on the SATA dock with the latest uBoot and Linux Kernel. However, there is still something which puzzles me. My SATA HDD docked in the GFH still has the first installation of ArchLinux package from the instructions show in this page http://archlinuxarm.org/platforms/armv5/seagate-goflex-hby cohortcw - Debian