Seems to revert to boot part 0... CASset=max CONTRY_TYPE=FF FEATURE_BIT=00 MALLOC_len=5 MODEL_ID=B303 MPmode=SMP PRODUCT_NAME=STG-328 VENDOR_NAME=MitraStar Technology Corp. autoload=no baudrate=115200 boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr bootargs=console=ttyS0,115200 ubi.mtd=4,2048 rootfstype=ubifs root=ubi0:rootfs1 rw rootdelay=2 bootargs_dfby achlebek - Debian
Ok I prepared USB-attached SSD with Debian but it boots stock firmware when connected to front port. I attach dmesg and fw_printenv - what could I do wrong?by achlebek - Debian
~ $ cat /etc/fw_env.config # Configuration file for fw_(printenv/saveenv) utility. # Up to two entries are valid, in this case the redundant # environment sector is assumed present. # Notice, that the "Number of sectors" is ignored on NOR and SPI-dataflash. # Futhermore, if the Flash sector size is ommitted, this value is assumed to # be the same as the Environment size, which iby achlebek - Debian
Thank you bodhi. Is there an SSH way to blindly make it boot kernel-2? I never tinkered with serial console, I would need to get an adapter and do some research, hopefully that's not beyond my scope of expertise...by achlebek - Debian
Hi, there seem to be here some extremely proficient users so let me ask a question before I try to Debian my after-warranty Zyxel NAS326: It reverts to defaults on every reboot/power. I attach full dmesg but there are some worrying lines about bad blocks in NAND: Quote Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 nand_read_bbt: bad blby achlebek - Debian