bodhi Wrote: ------------------------------------------------------- > @servercat, > > Whenever that happen, don't reboot, stay in the > rescue system and run the install script again. There was nothing that could be done at that point since every command gave an input/output error like this: root@debian:/bin# ls -bash: /bin/ls: Input/output error BTW is this thby servercat - Debian
I tried to install uboot. But it couldn't go further than this. root@debian:/tmp# ./install_uboot_mtd0.sh !!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!! If you lose power to your device while running this script, it could be left in an unusable state. This script will replace the bootloader on /dev/mtd0. This installer will only work on the following devices:by servercat - Debian
bodhi Wrote: ------------------------------------------------------- > [....] > My suggestion: boot into the rescue system on the > stick, and rerun the Debian squeeze installation. > If the installation detects that the uBoot is > already the latest, then it's good, proceed with > installation. When encounter with question about > restoring uBoot envs to known gby servercat - Debian
Changing the filesystem was a no go unfortunately. I removed the journal with tune2fs and doublechecked it was ext2 before I tried to boot it. It did not boot. Seems like the only thing that has worked so far is the Jeff's rescue system. I did not get any errors before when installing the uboot environment in the beginning of this thread. That is why I'm so puzzled why it won'tby servercat - Debian
Thanks for the reply bohdi. It does not boot unfortunately. Could it be something with the env variable usb_rootfstype ? that tells which filesystem that my GoFlex Home is allowed to boot from. I had issues with the rescue system when it was formatted as ext3 so I made it ext2 and it booted fine. I'm not sure how I'm I supposed to alter the usb_rootfstype value on the GoFlex sinceby servercat - Debian
GoFlex Home 3TB got semi bricked and I can only access it from a rescue USB flash drive. I finally got to it and tried to install debian on my GoFlex Home 3TB. I followed Jeff's guide. The wheezy script could not complete and I got the error FATAL: kernel too old So I stopped trying with wheezy and succesfully installed squeeze afterwards. Problem was the GoFlex Home wouldn't booby servercat - Debian
Wow thank you for your reply. I really got confused a bit by the tut and thought the drive was supposed to be the boot drive. I'll get to it then. THanks againby servercat - Debian
Hi, I'm planning on debianizing my GoFlex Home. I was going to put Arch on it but stumbled on the tutorial by Jeff here: http://projects.doozan.com/debian/ which lead me to this page. While browsing the forums before installing I got to this thread: http://forum.doozan.com/read.php?2,9819 Which eventually lead me to this second tutorial by Gr3yh0und http://morschi.com/2012/10/05/by servercat - Debian