Thanks for your reply. fdisk -l only lists some memory devices and the usb stick. The SATA disk is not visible. fw_printenv shows arcNumber=2097. Does anyone know a arcNumber that supports SATA on GoFlex NET?by azeera - Debian
Hi, with great help from the forum I installed wheezy on a stick and can sucessfully boot it. When I plug in a SATA disk I hear that the motor starts spinning but it is not recognized by the kernel. Is there anything else that needs to be done in order to use a SATA disk? Regards, azeeraby azeera - Debian
Thanks for this hint, that resolved the issue. After updating uImage and uInitrd I can boot from the stick and upgraded from squeeze to wheezy.by azeera - Debian
The stick with squeeze is plugged in with the rescueme file on / . This is the output from the boot: U-Boot 2011.12 (Apr 18 2012 - 23:08:20) Seagate GoFlexNet SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB...by azeera - Debian
There is dhcpd on my network. I used wireshark and an old network hub for sniffing but did not find any packets from my GoFlex. So it seems it is doing something different.by azeera - Debian
After creating the rescueme file, GoFlex loads uboot-original-mtd0.kwb. The green LED keeps on blinking but it seems to stuck somewhere. This is what I see on the serial console: U-Boot 2011.12 (Apr 18 2012 - 23:08:20) Seagate GoFlexNet SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E111by azeera - Debian
Thanks for pointing me to this thread. In order to follow the steps to create uBoot, I need at first to boot my GoFlex, what does not work at the moment. What do I have to do to boot the original image?by azeera - Debian
Thanks, that helped to install squeeze the GoFlex Net. But after the reboot Debian does not boot from the USB stick. The LED just blicks yellow. Same if I remove the usb stick, LED keeps blicking yellow the original OS is not loaded. I build a serial cable and captured the boot process with attached USB stick: ---------- U-Boot 2011.12 (Apr 18 2012 - 23:08:20) Seagate GoFlexNet SoC:by azeera - Debian
Hi, I tried to install debian wheezy on my new FreeAgent GoFlex Net. When I run ./kirkwood.debian-wheezy.sh it installs uBoot but later stops with: # Starting debootstrap installation I: Retrieving InRelease debootstrap failed. See /tmp/debian/debootstrap/debootstrap.log for more information. cat /tmp/debian/debootstrap/debootstrap.log shows -bash-3.2# cat /tmp/debian/debootstrap/dby azeera - Debian